WEIDULI S4 iWatch Wireless Charger Instructions
- June 12, 2024
- WEIDULI
Table of Contents
WEIDULI S4 iWatch Wireless Charger
Product Information
This product is a receiver that is designed to be connected to a radio or TV. It complies with FCC’s RF Exposure guidelines and should be installed and operated with a minimum distance of 20cm between the radiator and your body. The product comes with a supplied antenna that should be used for optimal performance.
Product Usage Instructions
- Connect the receiver to your radio or TV using the appropriate cables.
- Ensure that the installation maintains a minimum distance of 20cm between the radiator and your body.
- Use only the supplied antenna that comes with the product.
- If you encounter any difficulties during installation or operation, consult the dealer or an experienced radio/TV technician for assistance.
Specifications
- Product name iWatch wireless charger
- Product model S4
- Watch charging power 2.5W
- Product size 38.138.313.6+0.1mm
Charging instructions
- After connecting this product to a USB device such as Laptop, put the watch above the wireless charging area and it can be automatically attached to the surface of the product to start wireless charging.
- After connecting this product to a USB device such as Socket, put the watch above the wireless charging area and it can be automatically attached to the surface of the product to start wireless charging.
Power bank function description
After the device is connected to an interface such as USB, the wireless
charging function of the watch starts to work, and the device stops working
after the data cable is removed.
Precautions
- Always keep the product dry and do not use chemical agents for cleaning and scrubbing. Please protect our environment, and recycle this device at the designated location.
- Children or persons who are not equipped to use this device alone must use this device under the supervision of an adult.
- Do not bump, disassemble, pierce, crush, or expose this device to moisture.
- Do not apply this mobile device to devices that do not meet the output parameter requirements, it may cause malfunction or fire.
Packaging List
- Mobile device*1
- Manual*1
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there IS no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm the radiator and your body: Use only the supplied antenna.