Shenzhenshi Weiduli Technology E30 Magnet Wireless Power Bank Instruction Manual
- June 5, 2024
- Shenzhenshi Weiduli Technology
Table of Contents
Shenzhenshi Weiduli Technology E30 Magnet Wireless Power
Bank
MANUAL
- Work as a magnetic suction wireless power bank. supporting iPhone 12/13 Series
- Work as normal wireless power bank, suppo ting all mobile phones with Ql protocol Supporting OPHW, XM.SAM and other wireless charging phones
- Work as a portable small size power bank, supporting normal charging for 99%phones
- Work as wil ress charger put on desk for convenient charging
- The device can be held in the hand for normal use.
Notes：wireless charging function
- Put the phone on the wireless charger.click to turn on the wireless chareing function
- When using the charger to charge the power bank,when the input is in the fast charging state,then tumon the wireless charging for fast charging. If you turn on the wireless charging first.then use the charger to charge the power bank there will only be5W Wireless charging
- In the charging process of the power bank when it is fully charged.the charging protocol will switch to the 5V input state.At this time.wireless charging is turned on,and only ordinary 5W charging is available. When the input charging cable is unplugged.it wilt automatically restart, and the wireless charging can enter the fast charging mode
- During charging with PD12V charger,the wireless charging function is turned off because wireless charging does not support 12Vpower supply
- DIGITAL
- ORIGINAL
- DESIGN
Features
- 15W magnetic wireless quick charging
- Power bank+wireless+magnetic suction 3in 1
- PD+QC20W quick charging
- Sync input and output for portable charging Accurate LED power indicators
- High quality safe polymer battery
Packing details
- Power bank*1
- manual*1
- Type-C charging cable * 1
Specifications
- Name Magnetic Wireless Power Bank
- Battery Polymer
- Type-C input DCSV=3A/9V=2.25A/12V=1.5A
- Type-C output DC5V=3A9V=2.25A/12V=1.5A
- Wireless output 15WMax
- Executive standard GB/T35590-2017
- Working temperature -10°C-40°C
- Power Indicators
Power in cators to monitor the power status
- Checking ram aining power Click the button,if one white light is onit means the power is within 20%, if two white lights are onit means the power is within 40%, if three white lights are on,it means the power is within 60%,if four white lights are on,it means the power i5 within 806.and tour white ignts are on,it means the power is within 1002%. When the last light of the light flashes.the battery level is ess tnan30,please cnarge it ds S0On as posS1Oe
necking charging function: After clicking the button,during use, the first
light turms on White, indicating that the mobile power bank has started the
fast charging function, if the fifth Light turns on a green light means that
the mobile power wireless charging function works normaly.
Notes and Warnings
- If this device is not used for a long time,please charge it atieast every 3 months
- t might produces light heat during charging.which is normal as long as it’s below 55’C
- Always keep this device dry and do not clean it with chemical agents
- Go green with XIP IN and recycle this device at designated place
- Lhildren must use it under the guidance of adults.
- Do not crash.disassemble,impale or put this device into humid conditions.
- Do not use it to charge devices within compatible current and voltage,which will cause fire or other problems
FAQ
- When it’s not charging for this device：
- When it’s charging for the phone
- please check the cable.charger or adapter used are working
- If not.please choose compatible components to charge it
- Please make sure the power is on and there is power left in this device
- If above are checked OK.please goto the local retailer for assistance
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>