INSIGNIA NS-SPST2B Satellite Speaker Stands Installation Guide
- June 12, 2024
- Insignia
Table of Contents
ASSEMBLY GUIDE
Satellite Speaker Stands
NS-SPST2B
Before using your new product, please read these instructions to prevent any damage.
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your NS- SPST2B speaker stands are designed for reliable and trouble-free performance.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
CAUTION: Avoid potential personal injuries and property damage!
- Check your speaker’s documentation to see if there are any special requirements for mounting your speaker.
- Read through these instructions completely to be sure you’re comfortable with this installation process.
- Do not use this product for any purpose not explicitly specified by the manufacturer.
- The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
- If you do not understand these instructions or have doubts about the safety of the installation, assembly, or use of this product, contact Customer Service at 1-877-467-4289.
- The weight of your speakers must not exceed 4 lbs. (1.8 kg).
- This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children!
Features
- 28 – 38 in. (71.1 – 96.5 cm) of height adjustment place your speakers where you want them
- Wide-ranging capability supports most popular speaker brands weighing up to 4 lbs. (1.8 kg)
- Integrated cable management system conceals and organizes your cables
- Wide, teardrop-shaped base guards against accidental tip-overs
- Durable steel frame adds strength and sturdiness
- For customer service, call: 1-877-467-4289
Package contents
- Speaker stands (2)
- Assembly hardware
- User Guide
Dimensions
Parts
Hardware
| # | Hardware | Qty |
|---|---|---|
| 06 | 1/4-20 × 12 mm screw | 2 |
| 11 | 1/4-20 × 12 mm screw | 2 |
| 12 | M4 washer | 2 |
| 13 | M4 x 7 mm screw | 2 |
| 14 | M4 x 10 mm screw | 2 |
| 15 | M5 × 12 mm screw | 4 |
| 16 | 1/4-20 × 1/2 in. screw | 4 |
| 17 | Hook ‘n loop strap | 10 |
Tools needed
Phillips screwdriver
Installation instructions
STEP 1 – Installing the base pads
- Carefully place the base (03) top-down on a cushioned, clean surface to protect it from scratches or damage.
- Clean the 10 pad locations with denatured or isopropyl alcohol so that the base pads (04) will bond securely.
- Remove the paper backing from the 10 base pads and place them on the pad locations on the base.
- Repeat for the second base.
STEP 2 – Attaching the pole to the base and adjusting the height
- Carefully screw the bottom pole (01) clockwise into the base (03). Make sure that you screw the pole fully into the base to ensure stability.
- Insert the top pole (02) into the bottom pole (01), lift it up or down to adjust to the height you want, then tighten the locking collar by turning it clockwise only until the top pole doesn’t slip down.
- Adjust the top pole (02) so that the curved section is over the long section of the base (01), then fully tighten the locking collar by turning it clockwise.
- Repeat for the second speaker stand.
STEP 3 – Option 1: Attaching rear-mount speakers with threaded screw inserts
- Attach the L bracket (10) to the top pole (02) with an M5 x 15 mm screw (11), with the speaker wire slot arranged as shown. Tighten securely.
- For speakers with a single hole in the back – Attach the speaker to the stand using an M4 washer (12) and an M4 x 7 mm screw (13), an M4 x 10 mm screw (14), or an M5 x 12 mm screw (15) or 1/4-20 x 1/2 in. screw (16) with no washer. Tighten securely, then skip to STEP 4 – Routing the speaker cables.
- For speakers with two holes in the back – Attach the dual bracket (09) to the speaker (threaded screw facing outwards) with two M5 x 12 mm screws (15), or two 1/4-20 x 1/2 in. screws (16). Tighten securely.
Attach the speaker/bracket assembly to the stand with an adjusting nut (05).
Tighten securely then skip to STEP 4 – Routing the speaker cables on page 17.
STEP 3 – Option 2: Attaching rear-mount speakers with key-hole slots
- Attach the L Bracket (10) to the top pole (02) with an M5 x 15 mm screw (11), with the speaker wire slot arranged as shown. Tighten securely.v
- Attach the (06) 1/4-20 × 12 mm screw to the L bracket (10) with an adjusting nut (05). Tighten securely.
- Attach the speakers to the stands by sliding the slots on the backs of the speakers over the (06) 1/4-20 × 12 mm screws, then skip to STEP 4 – Routing the speaker cables on page 17.
STEP 3 – Option 3: Attaching bottom-mount speakers
Option A – Attach the top plates (07) to the top poles (02) with
M5 x 15 mm screws (11), with the speaker wire slot arranged as shown. Tighten
securely.
- If the speakers have mounting holes on the bottom, attach the speakers to the stands using option A or B. Otherwise, use option C.
- Use M5 x 12 mm screws (15) or 1/4-20 x 1/2 in. screws (16). Tighten securely,then skip to STEP 4 – Routing the speaker cables on page 17.
Option B – Use an M4 washer (12) and an M4 x 7 mm screw (13). Tighten
securely, then skip to STEP 4 – Routing the speaker cables.
Option C – Attach the double-stick speaker pads (08) to the top
plates (07) by removing the paper covering the adhesive surface on the bottom
of the pads and pressing them firmly onto the top plates. When the pads are
firmly attached to the top plates, remove the paper covering the adhesive
surface on the top of the double-stick speaker pads (08) and press the
speakers firmly onto the pads.
STEP 4 – Routing the speaker cables
Option A – Route the speaker cables by passing the wires into the speaker wire
slot at the top of the top pole, then down the pole assembly and out the hole
in the bottom pole and under the base. 
Option B – Run the wires on the
outside of the poles and attach them to the poles using the hook ‘n loop
straps (17) as necessary.
Specifications
Dimensions (H × W × D| 9.06 × 10.38 x 28 to 38 in. (23.01 × 26.36 x 71.12 to
96.5 cm)
---|---
Height adjustment range| 28 to 38 in. (71.1 to 96.5 cm)
Weight| Gross: 11.1 lbs. (5 kg)
Net: 9.8 lbs. (4.4 kg)
Supported weight| 4 lbs. (1.8 kg) per speaker stand
ONE-YEAR LIMITED WARRANTY
Definitions:
The Distributor* of Insignia branded products warrants to you, the original
purchaser of this new Insignia-branded product (“Product”), that the Product
shall be free of defects in the original manufacturer of the material or
workmanship for a period of one (1) year from the date of your purchase of the
Product (“Warranty Period”).
For this warranty to apply, your Product must be purchased in the United
States or Canada from a Best Buy branded retail store or online at
www.bestbuy.com or
www.bestbuy.ca and is packaged with this warranty
statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the country where the original purchase was made.
hat does the warranty not cover?
This warranty does not cover: • Food, beverage, and/or medicine loss/spoilage. • Customer instruction/education •Installation •Set up adjustments • Cosmetic damage • Damage due to weather, lightning, and other acts of God, such as power surges • Accidental damage •Misuse •Abuse •Negligence • Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place of other than a private home. • Modification of any part of the Product, including the antenna • Display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).• Damage due to incorrect operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold “as is” or “with all faults” • Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.) • Products where the factory applied serial number has been altered or removed • Loss or Theft of this product or any part of the product • Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures throughout the display. (Pixel based displays may contain a limited number of pixels that may not function normally.) • Failures or Damage caused by any contact including but not limited to liquids, gels or pastes.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
*Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2023 Best Buy. All rights reserved.
www.insigniaproducts.com
1-877-467-4289 (U.S. and Canada)
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2023 Best Buy. All rights reserved.
Documents / Resources
|
INSIGNIA NS-SPST2B Satellite Speaker
Stands
[pdf] Installation Guide
NS-SPST2B, NS-SPST2B Satellite Speaker Stands, Satellite Speaker Stands,
Speaker Stands, Stands
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>