MASSCOOL AHS-102 HDMI Splitter 1×2 User Manual
- June 12, 2024
- MASSCOOL
Table of Contents
MASSCOOL AHS-102 HDMI Splitter 1×2
DESCRIPTION
The MASSCOOL AHS-102 HDMI Splitter 1×2 is a device that is meant to split a single HDMI signal from a source device, such as a Blu-ray player or game console, into two distinct HDMI outputs. This can be accomplished by using the device in conjunction with a source device that generates the HDMI signal. This enables you to play the same high-definition audio and video content on two separate HDMI-equipped displays, such as televisions, monitors, or projectors. You may do this by connecting the HDMI cable from one device to both of the displays. The input signal is duplicated by the splitter, which results in the provision of identical outputs. Because of this, the splitter is suitable for applications in which you wish to present the same information on numerous displays at the same time.
SPECIFICATIONS
- Brand: MASSCOOL
- Product Dimensions 2 x 4.5 x 7 inches
- Item Weight 4.8 ounces
- Item model number AHS-102
WHAT’S IN THE BOX
- HDMI Splitter 1×2
- User Manual
FEATURES
- Ports Available on HDMI Splitters: The signal for the DDC input is 5 volts p-p (TTL).HDMI is used for video output. 480i, 576i, and 1080i are the highest possible resolutions that can be interlaced at 50 or 60 hertz.480p, 576p, 720p, and 1080p are all progressive (50&60Hz) video formats.Physiological Traits and Qualities
- Details and requirements Vertical Frequency, Which Is the Operating Frequency 50/60 Hz as the range and width of the Video Amplifier is 2.5 Gbps/250 MHzVertical Frequency, Which Is the Operating Frequency 50/60 Hz as the range and width of the Video Amplifier is 2.5 Gbps/250 MHz
- HDMI, HDCP, and the highest video resolution of 1080p are supported. Maximum power usage of 5 watts-amperes.25 Gbps in bandwidth for each channel12 bits for each channel, for a total of 36 bits per channel audio formats include deep color uncompressed audio like LPCM audio formats including compressed audio like DTS Digital and Dolby Digital
Note:
Products that are equipped with electrical plugs are suitable for use in the
United States. Because power outlets and voltage levels vary from country to
country, it is possible that you will need an adaptor or converter in order to
use this device at your destination. Before making a purchase, you should make
sure everything is compatible.
CONNECTIONS
The MASSCOOL AHS-102 HDMI Splitter 1×2 comes equipped with specialized connections that make it possible to divide an HDMI signal into two distinct outputs.
The following is a list of the common connections that can be found on an HDMI splitter:
-
Input through HDMI:
An HDMI cable is inserted into this port, and it is used to connect the source device, which could be a Blu-ray player, a gaming console, or a media player. The signal that is received at the input will be divided and sent to more than one display. -
HDMI Outputs, Two in Number:
You are able to attach two separate HDMI displays, such as televisions, monitors, or projectors, to the device because it has two HDMI output ports. The input signal is replicated and sent out through both of the splitter’s outputs. -
Power Coming In:
It’s possible that the splitter won’t work without power. It is possible that there will be a power input port where a power adapter can be plugged in to supply the required amount of power. It’s possible that certain models get their power from the HDMI input source. -
Indicators with LEDs:
Some HDMI splitters come equipped with LED indicators that provide visual feedback on the operation of the splitter by displaying the power status as well as the signal activity for each output. -
Switch for the Power Supply (if it is Available):
There might be a power switch in some of the devices that allows you to turn the splitter on or off. -
Cords and wires:
In order to connect the input source device to the input port and the output ports to the displays, you will require HDMI cables.
PRECAUTIONS
-
Learn from the Guide:
Before installing or using the product, make sure you have read and thoroughly comprehended the user manual that the manufacturer has given. -
The Power Sources Are:
Use either the power adapter that was given or another power source that is compatible and has the appropriate voltage and current specifications. Using the splitter with the wrong kind of power supply can cause it to break. -
Compatibility with Different Voltages:
Make sure that the voltage of the power source is equal to or greater than the voltage that the splitter requires. If you use a voltage that is incompatible with the equipment, you risk damaging it or causing it to malfunction. -
The Quality of the Cable:
When making connections, use HDMI cables of a good quality. A signal attenuation and an impact on the splitter’s performance can be the result of using cables of poor quality. -
Moving Cables Around:
Be sure to handle HDMI cables with care when inserting and removing them from their respective ports. It is important to refrain from using excessive force, since this could potentially ruin the connectors. -
A ventilation system:
To avoid the splitter from becoming overheated, position it in an area with adequate ventilation. It is important to avoid covering the device or blocking the airflow. -
Degrees Celsius:
It is important to keep the splitter away from any sources of heat as well as direct sunshine. Performance and durability can be negatively impacted by high temperatures. -
Electricity Produced by Static:
Before handling the splitter, discharge any static energy that may be building up on your body to prevent any potential damage to the splitter’s internal components. -
Compatibility of the Signal:
Make sure that the HDMI signal that is coming from the device that is serving as the source is suitable with the splitter’s requirements. Using signals that are not supported can lead to complications. -
Configuring the Resolution:
Verify that the settings for the resolution on your source device correspond to the capabilities of the monitors you have connected. -
Plugging in directly:
When attaching or removing HDMI connections, you must ensure that both the source device and the displays have their power switches set to the off position. The practice of hot-plugging might result in electrical surges that could potentially cause damage to the connected devices. -
Recommendations from the Manufacturer:
Installing, using, and maintaining the product should be done in accordance with any special recommendations supplied by the manufacturer. -
Inspection on a Regular Basis:
Inspect the splitter, the cables, and the connections at regular intervals for any signs of wear, damage, or connections that have become loose. Take fast action regarding any concerns. -
Turning Off the Power During Maintenance:
In order to protect yourself from receiving an electric shock while doing maintenance or adjustments, you should unplug the power supply and any other connections. -
Updates to the Firmware (if they are available):
If applicable, check with the manufacturer for any available changes to the device’s firmware. Bringing your firmware up to date can help improve performance and fix bugs.
FREQUENTLY ASKED QUESTIONS
What is the MASSCOOL AHS-102 HDMI Splitter 1x2?
The MASSCOOL AHS-102 is an HDMI splitter that takes one HDMI input source and splits it into two identical HDMI output signals.
What is the primary purpose of the AHS-102 HDMI Splitter?
The primary purpose of this splitter is to duplicate a single HDMI video and audio signal to multiple displays or monitors simultaneously.
How does the AHS-102 HDMI Splitter work?
The AHS-102 splitter can handle HDMI signals, which include both high- definition video and audio.
What is the maximum supported resolution of the AHS-102 splitter?
The AHS-102 splitter typically supports resolutions up to 4K Ultra HD (3840x2160 pixels) at 30Hz refresh rate.
Does the AHS-102 splitter support 3D video formats?
Yes, the AHS-102 splitter generally supports 3D video formats when connected to compatible devices.
Does the AHS-102 splitter support audio signals as well?
Yes, the AHS-102 splitter supports audio signals that are embedded in the HDMI stream, including surround sound formats.
Is the AHS-102 splitter powered or passive?
The AHS-102 splitter usually requires external power to function properly. It typically comes with an included power adapter.
What devices can I connect to the AHS-102 HDMI Splitter?
You can connect devices like Blu-ray players, gaming consoles, media players, computers, and more to the input of the AHS-102 splitter.
Can I use the AHS-102 splitter for extending my HDMI signal to multiple rooms?
No, the AHS-102 is a splitter, not an extender. It duplicates the same signal to multiple displays but doesn't extend the signal's range.
Is the AHS-102 splitter HDCP compliant?
Yes, the AHS-102 splitter is generally HDCP compliant, meaning it can pass through encrypted content for protected media playback.
Can I cascade multiple AHS-102 splitters for more displays?
Cascading multiple splitters might not be a straightforward solution and can lead to signal degradation. It's better to use a higher-capacity splitter if you need more outputs.
Can I use the AHS-102 splitter for commercial setups, like in retail stores or conferences?
Yes, the AHS-102 splitter can be used in commercial setups to display the same content on multiple displays, such as for advertising or presentations.
Does the AHS-102 splitter degrade the signal quality?
A well-designed splitter should not significantly degrade the signal quality, but longer cable runs might result in some signal loss.
Is the AHS-102 splitter compatible with older HDMI versions?
The AHS-102 splitter should generally be compatible with various HDMI versions, but it's a good idea to check for compatibility with your specific devices.
Can the AHS-102 splitter work with different refresh rates?
The AHS-102 splitter usually supports various common HDMI refresh rates, including 30Hz, 60Hz, and others.