OTium BT09 Mini Wireless 4.1 Music Receiver User Guide

OTium BT09 Mini Wireless 4.1 Music Receiver User Guide

Specifications:

Bluetooth Version: 4.1
Frequency Range: 2.4GHz
Output Power Category: Class2
Bluetooth Mode: HFP/HSP/A2DP/AVRCP
Bluetooth Range:Up to 30 feet
Working Time: Up to 8 hours
Working Current:15 mA (MAX)
Charge Voltage: DC 5.0V

Product Diagram

1. Power ON/OFF; Pause/Play; Answer /Hang Up
2. Microphone
3. Next Song/Volume Up
4. Previous Song/Volume Down
5. USB Charge
6. Indicator Light
7. Audio Output

Power On
Long press the button” (.I) “about 2s, it will power on automatically, red light will stay on for 1 second then turn blue, flashing slowly.

Power Off
Long press the button” (.I) “about 3s,red light will stay on for 1 second then power off automatically.

Instruction:

1. Connect the device to your Headphone/Home Speakers or Car Stereo System with 3.5mm audio cable.
2. Pair the receiver to your phone.
3. Now you can enjoy your music through your Headphone, Speakers, Home Stereo System/ Car Stereo System, or handsfree calling.

Pair to your phone:

1. For the first time using the device as a receiver, you should pair it to your mobile phone.
2. When power on, long press the button” C!> ” about Still red and blue light flash alternately, it will enter into pairing state.
3. Open your phone bluetooth.
4. Search for the Bluetooth device “Otium-BT09” and connect it.
5. Enter the code “0000”if needed.
6. If pair successfully, the indicator light will spasmodically blink.

Answering a call:
When there is an incoming call, short press the button” (!) “to answer it.

Rejecting a call
Long Press the button” (.I) “about ls.

Select audio output:
When get through, long press” (.I) ” ls you can choose to answer the call through Bluetooth or phone.

Ending the call:
Short press the button” (.I) “or just hang up your phone.

Connect Two Cell phones

1. Pair the Bluetooth receiver to the first phone.
2. After pair successfully, turn off the first phone’s bluetooth.
3. The receiver will enter pairing mode again.
4. Pair the Bluetooth receiver to the second phone.
5. After pair successfully, turn on the first phone’s bluetooth. Select “Stream bot Mini” and click “connect”.
6. Two phones will both connect the Bluetooth receiver.

Notice
The receiver will connect to the last connected phone automatically when it turns on. (Please make sure that your phone bluetooth is enable before turn on the receiver.)

Answer two calls at the same time:
When you are answering the call with the first phone which paired with the Receiver, if there is a new call incoming on your second phone which paired with the Receiver: Long press the button” (!) “about ls, receive the second phone call through bluetooth, the call of first phone will switch to answer through phone. Long press the button” (!) “about ls again to switch between the two calls.

Answer two calls one by one:
Short press the button” “,hang up the first call, the second call will be waiting, you can short press the button” t!) “to answer it or long press the button” (.I) “to reject it.

Redialling the last called number
Double press the button” (.I) “to redial the last called number.

Voice Assistant

1. Long Press the button” (.I) ” for about ls to start cell phone voice assistant.
2. Short press the button to turn off the voice assistant.

Play Music

1. Play/Pause: Short press the button”(!) “
2. Next Song: Short press the button” + “
3. Previous Song: Short press the button” – “
4. Volume Up: Long press the button” + “
5. Volume Down: Long press the button” – “

Call/Voice Assistant Mode

1. Volume Up: Short press the button” + “
2. Volume Down: Short press the button” – “
3. Mic Unmute: Long press the button”+”
4. Mic Mute: Long press the button” – “

Clear Bluetooth Connection List
When power off, long press the button” (.I.) ” about 8s,till it power on then automatically power off.

Low Power Warning
When the device is in low power state, it will alarm automatically, the red light flashiest quickly; it will power off automatically if the voltage is below 3.0V.

Charge the Device

When the device is in low power state, please charge it through USB charging port with DC SV input, When finish charging, the red indicator will turn blue. Please use the micro USB cable to charge the device.

Notes

1. Please charge it when in low battery or do not use it regularly, in case it won’t normally work or damage the battery.
2. Bluetooth signal be blocked by surrounding objects and would influences the audio quality, please put it in the right position without barrier between adapter and your phone(or other devices).

Tech Support:

Website: www.otiumobile.com
Email: [email protected]
Facebook: www.facebook.com/otiumobilehttp://www.otiumobile.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>