OTium S02 Bluetooth Sport Headphone User Manual

S02
Bluetooth Sport HeadphoneThanks for using our product!

Getting Started

a. Power on

b. Fitting and wearing
Ear tips in different sizes

Semi-closed ear tips
(suitable for doing sports)|
---|---
Closed ear tips
(suitable for listening to music)|
Ear hooks in different sizes
(used for secure fit)|

Gently push the earbud into your ear canal and adjust the ear hook to get a comfortable fit.
C. Pairing

To enter pairing mode, press and hold MFB until the indicator flashes red and blue alternately.
(The headset will directly enter pairing mode the first time you turn it on. To enter pairing mode for the next time, you need to follow the abovementioned steps.)

Activate the Bluetooth function of your mobile phone, search and select “Otium-S02” from the devices list to connect.
Multi-point Connection

1. Follow the pairing procedure to connect the headset to Phone 1 and turn off the headset.
2. Long press MFB to enter pairing mode again. Activate the Bluetooth function of Phone 2 and search for the headset. Select “Otium-S02” from the devices list and click it to connect.
3. Go back to Phone 1 and select “Otium-S02” from the devices list to finish multi-point connection.

Next/Previous track
When playing music, long press Vol +/- for 1 second

Adjust volume
When on a call or playing music, short press Vol +/- once.

General Functions

Answer/End a call
When there’s an incoming call (indicator flashes blue), press MFB once; press again to end it.

Reject a call
When there’s an incoming call (indicator flashes blue), long press MFB for 1 second.

Redial last number
When standby, double press MFB.
Note: This function is phone dependent.

Mute
When on a call, double press MFB.

Multiple call handling
When you are already on a call, if there’s an incoming call on the other phone, press MFB to answer the 2nd call and put the 1st call on hold. You can switch between the two calls by double pressing MFB.
Play/Pause
When playing music, press MFB once to pause, press again to resume playing.
Activate voice control
Press MFB for 1 second under standby mode to activate voice control of your phone.
Transfer voice between headset and phone
During a call, long press MFB for 1 second.

Charging

When the battery level is low, you will see the indicator flash red and hear a voice prompt.

Factory Reset

During charging, press and hold MFB until the indicator flashes red and blue alternately.

Product Features

BLUETOOTH 4.1| V4.1 Bluetooth version, compatible with over 99% of mobile phones and tablets
---|---
| CSR Bluetooth chip, ensuring optimal Bluetooth performance
| Light weight(12.7g) and small size, comfortable and pressure-free wearing

Basic Parameters
Bluetooth Version: V4.1
Charging Time: 1 hours
Standby Time: 155 hours
Bluetooth Profile: HFP/A2DP/HSP/AVRCP
Model: Otium-S02
Weight: 12.7 g
Operating Range: 33ft/10m
Talk Time: 5 hours

Warranty Card

Warranty period: a limited 12-month warranty applies to our products.
Free service:
Under warranty, if there is any breakdown caused by manufacturing defects, please contact our dealers to enjoy free maintenance. You will always need this Warranty Card and your receipt or other proof of purchase to claim warranty.
Free maintenance won’t be available under the following circumstances：

1. Without Warranty Card or intact maintenance label
2. Damage caused by improper disassembly or repair
3. Damage resulting from liquid or dropping, and other artificial mechanical defects
4. Damage caused by any force majeure

◯: shows that the content of hazardous substances in the homogeneous materials of corresponding part is within the limitation stipulated in Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products (SJ/T11363-2006).
X：shows that the content of hazardous substances in at least a certain homogeneous material of corresponding part is beyond the limitation stipulated in Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products (SJ/T11363-2006).

FAQ/Trouble Shooting

I have established connection with my smartphone, but I am not hearing any sound?

A: Please make sure that you turn up the volume of both devices. Some smartphone requires you to setup the Bluetooth headset as an audio output device before sound is transmitted. Please see the instruction of your smartphone of details. If you areusing a music player or other Bluetooth device, please make it supports A2DP stereo music profile.

Why the connection is not stable and cuts out intermittently?

Please make sure there are no objects between the headset and your Bluetooth device; please make sure there is no radio or WIFI interference nearby.

Can I use the headset while it is charging?

No, you cannot use the headset while it is charging.

The headset is not responding no matter what I do.

Please try to reset the headset. (see the “Reset”section)

The sound is not very clear/the caller cannot hear my voice clearly.

Please adjust the volume on your phone and headset. Make sure there is no source of interference nearby. Stay close to your smartphone.

Tips

1. Before using the headset, please read the manual carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Use only chargers made by qualified manufacturer.
5. If the headset cannot be searched by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.

Safety Rules

1. Never disassemble or modify your headset for any reasons to avoid any damages and danger.
2. Do not store the headset in extreme temperatures (under 0℃ or over 45℃).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the headset.
6. Keep the headset dry.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>