OSRAM C10492720 DALI ECO BT RTC Control Instructions
- June 12, 2024
- OSRAM
Table of Contents
OSRAM C10492720 DALI ECO BT RTC Control
Important Information
The controller that can be abutted against normally flammable materials, including building insulation, and can be covered in normal use. Building elements, building insulation or debris have restricted access to the heated parts of the controller.
DALI ECO BT RTC control
DALI control unit with Bluetooth Low Energy interface 1)
| VAC | 220-240 V; 50/60 Hz |
|---|---|
| P | 0.3 – 3W |
| ta | -20…+60 °C |
| DALI control interface 2) | DA + / DA – / 15 VDC / max. 300m total wire length |
- Push button interface 4)| max. total wire length PB1: 50m; PB2: 5m (see wiring
scheme) 5)
Wireless interface 6)| Bluetooth® 4.0 / Connectivity range 7): ≤ 15 m
Type of protection 8)| IP20
Max. DALI load 9)|
- 32 ECG + 4 OSRAM DALI Sensors or OSRAM DALI Push button couplers10)
- 96 mA
Allowed leads diameter 11)| 0.5 – 1.5 mm 2
Time switch with energy storage12)| 72h buffer in case of mains power failure
(charging time min. 24h mains operation)13)
Dimensions
Mounting hint
APP for configuration and control
Wiring information
SAFETY AND MOUNTING INFORMATION
The DALI ECO BT RTC control unit is exclusively designed for luminaire integration. An independent installation (e.g. ceiling integration) is possible by means of the ECO CI KIT (Art. Nr. 4008321392091); Recommended cable types for independent mounting: DALI + mains voltage: 1x NYM 5×1.5mm² or 1 x H05VV 5×1.5mm². External push button: 1x NYM 3×1.5mm² or 1 x H05VV 3×1.5mm². The push button and DALI interfaces provide basic insulation against mains connection. If the push button interface or the DALI interface is connected to an external voltage, particular with mains voltage, the unit will be destroyed! Presence or daylight dependent operation requires connection to an OSRAM DALI sensor (for an overview of OSRAM DALI sensors please contact your local sales representative).
- DALI control unit with BLE interface;
- DALI interface;
- Maximal total DALI wire length;
- Push button interface;
- max. total wire length PB1: 50m; PB2: 5m (see wiring scheme);
- Integrated wireless interface;
- Typical wireless connectivity range;
- Type of protection;
- Maximal load connected to DALI interface;
- Maximal total number (= Sum) of connectible OSRAM DALI Sensors or push button couplers;
- Allowed wire leads diameter;
- Time switch with energy storage;
- 72h buffer in case of mains power failure (charging time min. 24h mains operation);
- Housing dimensions;
- Recommended wire preparation;
- tc point;
- Button to RESET to ex-factory settings (press >10s to Reset);
- Indication LED for Bluetooth connection;
- Mounting hint for proper radio connectivity;
- Do not place any mains voltage or LED supply wires within or close to this area;
- Recommended minimal distance to metal parts;
- Placement of integrated radio transmitter antenna;
- Wiring information;
- Install resistance 820 Ω / 5% / 1/4W only inside the luminaire;
- Change color temperature
- APP download for IOS and Android smart phones.
Hereby, OSRAM GmbH declares that the radio equipment type DALI ECO BT RTC control is in compliance with Directive 2014/53/EU and the relevant statutory instruments. The full text of the EU declaration of conformity or the UK- declaration of conformity is available at the following internet address: www.osram.com/lms-ce.
Frequency range: 2402 – 2480 MHz, max. HF output (EIRP) of the product: 4dBm.
Customer Support
OSRAM GmbH
Berliner Allee 65
86153 Augsburg
Germany
www.osram.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>