Tefal BL94C8KR Infinimix and Silence High-Speed Smoothie Blender User Manual

Tefal BL94C8KR Infinimix and Silence High-Speed Smoothie Blender

DESCRIPTION

• A. 1. LID
  2. REMOVABLE SEAL
  3. LOWER CAP
  4. UPPER CAP

• B. TRITAN JAR

• C. 1. REMOVABLE SEAL
  2. POWELIX BLADE UNIT
  3. LOCKING RING

• D. 1. MOTOR UNIT
  2. CONTROL RING
  3. START/ STOP BUTTON

• E. PANEL CONTROL
  1. BLENDER JAR LOCK INDICATOR
  2. XL CHOPPER JAR LOCK INDICATOR
  3. PULSE FUNCTION
  4. SMOOTHIE PROGRAM
  5. ICE CRUSH PROGRAM
  6. SORBET PROGRAM
  7. DESSERT PROGRAM
  8. CLEAN PROGRAM
  9. MANUAL SETTING

• F. PUSHER

• G. BRUSH

• H.* XL CHOPPER
  1. LID
  2. BLADES UNITS
  3. BLADES SERRATED UNITS
  4. BLADES GUARD
  5. CHOPPER JAR
  6. REDUCER
  7. LOCKING RING

CAUTION:

The safety precautions are part of the appliance. Read them carefully before using your new appliance for the first time. Keep them in a place where you can find and refer to them later on. The appliance will only start if the assembled jar (A+B+C) or the XL chopper (H) is correctly positioned on the motor unit (D) and the lid (A/H.1) locked on the jar (B/H.5).

BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME

Before using your appliance for the first time, rinse the parts that come into contact with food (assembled jar (A+B+C) and assembled XL CHOPPER (H))
CAUTION: Do not immerse the appliance in water (neither the motor unit (D) the blades units (C) nor the reducer (H.6)). Never put the motor unit under running water. Clean it with a damp cloth and dry it carefully. The blades are extremely sharp.
Make sure all the packaging has been removed before operating the appliance.

ASSEMBLING AND FITTING THE JAR

Moisten the seal (C1) (even if already fitted on the blades unit (C2)). Be careful to correctly fit the seal (C1) back onto the blade unit (C2) the correct way up (Fig. 1).
Place the blades unit (C2) on the locking ring (C3) (Fig. 2). Turn the jar upside down and fit the assembled locking ring (C) with blades on the base of the jar (Fig. 3). Lock it by rotating to lock ring (C3) in the clockwise direction (Fig. 3). Make sure the locking ring is locked correctly: the arrow on the jar must be aligned with the arrow on the locking ring (Fig. 3).
To help you, you can use the back of the brush (G) to lock or unlock the locking ring (C3)
Add the ingredients into the assembled jar without exceeding the maximum level indicated (Fig. 4):
• 1.75 L for thick mixtures • 1.5 L for liquid preparation
WARNING: Do not pour boiling liquids (over 80°C/176°F) into the jar
Lock the lid (A) on the jar (B) and turn it in the clockwise direction (Fig. 5).
Make sure the lid is locked correctly: the point on the lid should be aligned with the handle (Fig. 6). Put the assembled cap (A3+A4) in position on the lid and lock by rotating it in the clockwise direction. If the lid is not correctly locked, your appliance will not start. Put the jar correctly on the motor unit (Fig. 7): the point on the base of the jar should be aligned with the padlock on motor unit (Fig. 7). A jar logo (E.1) will appear on the screen (Fig. 7) and a bip signal will sound.

ASSEMBLING AND FITTING THE XL CHOPPER*

Place the reducer (H.6) on the locking ring (H.7) (Fig. 8). Lock it by rotating to the XL chopper jar (H.5) in the anticlockwise direction (Fig. 9). The closed padlock indicates when the blade holder is locked.
Assemble the blades by inserting the blade units onto the driver (Fig. 11)

Be careful, verify there is nothing blocked under the knife (H.2/H.3) (Fig.10) before put it inside the bowl (H.5) (Fig. 11)
Add the ingredients into the assembled chopper without exceeding the maximum level indicated (Fig. 12):
• 550ml max
WARNING: Do not pour liquids into the XL chopper
Push the lid (H.1) on the XL chopper jar (H5) and turn it in the clockwise direction (Fig. 13).
Make sure the lid is locked correctly (Fig. 14). If the lid is not correctly locked, the blades will not turn. Put the assembled XL chopper jar (H) correctly on the motor unit (D): A jar logo (E.2) will appear on the screen and a bip signal will sound.

USING YOUR APPLIANCE

bip signal will sound.
Slide your finger to the right to start blending from speed 1 to 6 a bip will sound at each step.
Timer starts from 0:00 et goes up.
To pause, touch “Start/stop” a bip will sound and the speed lights will blink.
To resume, maintain “Start/stop” 1 bip will sound and light will turn on
To stop, slide finger back to the left on position 0 or touch “Start/stop” for 3 seconds, a long bip will sound. The light goes back to 0 position.
Programs| Slide finger to the left a bip will sound for each position, a light will turn on for each position, a timer display for each program
On each program position, Start/stop light blinks.
To start a program, maintain start/stop and 1 bip will sound.
To pause, maintain start/stop a bip will sound, the program and start/stop lights will blink.
To continue, maintain start/stop a 1 bip signal will sound, program and start/stop lights will turn on.
To stop, touch the start and stop button for 3 seconds long bip signal will sound and light will go back on 0 position.
Timer starts from the program time (ex : 1:30) and counts down
To indicate the end of the program 3 bips will sound (program and start/stop light blink) and light will go back to 0 position
Pulse function| Slide finger to the left on the “pulse” position a bip signal will sound and Start/ stop light will blink.
Touch then hold Start/Stop to activate pulse immediately (there is no lag time between touch and the start of blending)
Release finger from Start/Stop button to stop (start/stop light will blink)

CAUTION: After running one cycle in the blender for the maximum processing time, let the blender rest for 1 minute before operating again.
After using the blender for a maximum of three cycles, stop the appliance and leave to cool to ambient temperature (takes about 2 hours).
The appliance is equipped with overload protection.
This prevents the motor from being damaged by an abnormal use.
If the appliance switches off during operation, proceed as follows:
Unplug and leave to cool down approximately 15-20 minutes.
Reconnect the appliance to the power supply and resume blending.
After approximately 3 minutes use, your appliance will start a stand by mode. To switch on / off your appliance, press the Start / Stop button.

ROUGH CHOPPING SMALL QUANTITIES

Accessory used: assembled mini chopper
Chop in a few seconds by pulsing (E.3): peanuts, almonds, etc… quantity / max time : 140g peanuts/12s or 150g almonds/8s Programs available with the jar (B):

Smoothie
| Use this program to make smoothie : blending fresh fruits/ vegetables with milk or yogurt| 200g of carrots + 100g of celeriac + 100g of bananas + 500g of orange juice| Default time : 1min20s
Ice crush
| Use this program to crush ice cubes into ice snow| 8 ice cubes max| Default time 40 sec
Sorbet
| Use this program to make ice cream : blending frozen fruits with fresh cream or yogurt| 450g frozen raspberries + 240g milk + 75g custar sugar. Tamper must be used to help the flow| Default time 1min10s
Cake
| Use this program to make some light dough like waffle, cake, pancake, clafoutis, brownie… You cannot make heavy dough like bread, brioche, pizza…| Yogourt cake : Add ingredients in this order on the jar. 120g yoghurt + 170g of custar sugar + 7.5g vanilla sugar + 3 eggs + 125g sunflower oil + 85g Corn flour + 65g almond powder + 140g flour + 11g baking powder. Put the mix in a mold and bake for 50min to 180°C| Default time : 1min15s
Clean
| Use this program to clean your blender| 200ml of water + 1 drop of washing- up liquid.| Default time : 30 sec

CAUTION: Do not add hot liquid above 80° C as it can be ejected out of the appliance due to a sudden build up of steam.

Programs available with the XL CHOPPER (H*)

content/uploads/2023/08/Tefal-BL94C8KR-Infinimix-and-Silence-High-Speed- Smoothie-Blender-User-Manual-33.png)| 200g of almonds| Default time : 40s
Fonction Pulse
| Use the Pulse function to prepare onion, garlic and fresh herbs| | 150g of onions| 7 pulses max Default time : 12s
Fonction Pulse
| You can also use the Pulse function to crush ice cubes into ice snow| | 4 ice cubes max 20X20X30mm max| 10 pulses max Default time : 20s
Ice crush
| Use this program to crush ice cubes into ice crush| | 4 ice cubes max 20X20X30mm max| Default time : 50s

The pulse button can still be used when no program is running.
CAUTION: Hard food may mark the inside of the jar but this does not affect the efficiency of the appliance. Frozen food must be smaller than a walnut. Be careful, verify there is nothing blocked under the knife (H.2/H.3) (Fig.10) before put it inside the bowl (H.5) (Fig. 11)

AFTER USING YOUR APPLIANCE

Unplug the appliance.
Empty the preparation, the jar is not meant for storing food in the refrigerator or freezer.
To clean the motor unit (D) and the reducer (H.6), use a damp cloth. Dry it carefully.
Never immerse the motor unit (D) and the reducer (H.6) in water
Wash the removable parts in water with few drops of washing-up liquid, immediately after use. For easy cleaning in tritan jar (B) you can use the « Clean program » :
Put 200ml of water. You can add 1 drop of washing-up liquid only in the jar (B). The appliance works at various alternating speed for approximately 30 seconds.
The lid (A1), XL CHOPPER parts (H.1 / H.2 / H.3 / H.5) and middle cap (A3 + A4) can be cleaned in the dishwasher, the Jar (B), the reducer (H.6) and the Powelix blades unit (C2) must not be cleaned in the dishwasher. Don’t immerse the blades (C2) completely and for a long time.
To help to clean the cap (A3 + A4), you can disassemble it in 2 parts (Fig19).

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?

Appliance does not work

| The plug is not connected.| Connect the appliance to a socket with the same voltage as indicated on the rating plate of the appliance.
The blender jug or XL chopper are not positioned correctly on the motor unit| Check that the blender jug or XL chopper are positioned properly on the motor unit as explained in the instructions.
In case of software bug.| Unplug the appliance, wait a few minutes and try again
The appliance stopped while in use| Overload| Follow the instructions in section Overload.

Excessive vibrations

| The product is not placed on a flat surface.| Place the appliance on a flat surface.
Volume of ingredients is too high.| Reduce the quantity of ingredient process.

Leak from the lid

| Volume of ingredients is too high.| Reduce the quantity of ingredient process.
The lid is not correctly positioned.| Place the lid correctly on the blender jug.
Leak from the bottom of the blender jug| The blades are not correctly positioned.| Fit the locking ring (C3) (Fig. 2) and lock it by rotating to lock notch in the clockwise direction (Fig. 3). Make sure the locking ring is locked correctly : the point on the jar must be aligned with the lock (Fig. 3)
The blades do not turn easily| Pieces of food too large or too hard.| Reduce the size or quantity of ingredient processed.
The lid is not correctly positioned.| Place the lid correctly on the blender jug / chopper jar.

INTERNATIONAL GUARANTEE:

COUNTRY LIST SMALL HOUSEHOLD APPLIANCES

INTERNATIONAL GUARANTEE: COUNTRY LIST

SMALL HOUSEHOLD APPLIANCES

| | | | | | |

ARGENTINA

| ****

0800-122-2732

| مصر EGYPT| ****

16622

| ****

VIETNAM

| ****

1800-555521

| МАКЕДОНИЈА MACEDONIA| ****

(02) 20 50 319

‡U3UUSUt

ARMENIA

| ****

010 55-76-07

| EESTI ESTONIA| ****

668 1286

| SLOVENIJA SLOVENIA| ****

02 234 94 90

| ****

MALAYSIA

| ****

603 7802 3000

AUSTRALIA

| ****

1300307824

| ****

SUOMI FINLAND

| ****

09 8946 150

| ****

ELLADA GREECE

| ****

2106371251

| ****

MEXICO

| ****

(55) 52839354

ÖSTERREICH AUSTRIA| 01 890 3476| FRANCE Continentale

+ Guadeloupe, Martinique, Réunion, St-Martin

| 09 74 50 47 74| 香港

HONG KONG

| 8130 8998| MOLDOVA| 22 224035
البحرين BAHRAIN| 17716666| DEUTSCHLAND GERMANY| 0212 387 400| MAGYARORSZÁG HUNGARY| 06 1 801 8434| NEDERLAND

The Netherlands

| 0318 58 24 24
БЕЛАРУСЬ BELARUS| 017 2239290| س لطن ة ُعمان OMAN| 24703471| INDONESIA| +62 21 5793 7007| NEW ZEALAND| 0800 700 711
BELGIQUE BELGIE BELGIUM| 070 23 31 59| POLSKA POLAND| 801 300 420

koszt jak za połączenie lokalne

| ITALIA ITALY| 1 99 207 354| NORGE NORWAY| 22 96 39 30
BOSNA I HERCEGOVINA| Info-linija za potrošače 033 551 220| PORTUGAL| 808 284 735| 日本

JAPAN

| 0570-077772| ESPAÑA SPAIN| 933 06 37 65
BRASIL BRAZIL| 11 2915-4400| قطر QATAR| 44485555| JORDAN| 5665505| SVERIGE SWEDEN| 08 629 25 00
БЪЛГАРИЯ BULGARIA| 0700 10 330| REPUBLIC OF IRELAND| 01 677 4003| ҚАЗАҚСТАН KAZAKHSTAN| 727 378 39 39| SUISSE SCHWEIZ SWITZERLAND| 044 837 18 40
CANADA| 1-800-418-3325| ROMANIA| 0 21 316 87 84| 한국어

KOREA

| 080-733-7878| ประเทศไทย

THAILAND

| 02 765 6565
CHILE| 02 2 884 46 06| РОССИЯ RUSSIA| 495 213 32 30| الكويت KUWAIT| 1807777 Ext :2104| TÜRKIYE TURKEY| 444 40 50
COLOMBIA| 018000520022| الممل اكلةعرب ايلةسعودية ARABIA SAUDI| 920023701| LATVJA LATVIA| 6 616 3403| عربياةلمتحدة **UAE ال| 8002272
HRVATSKA CROATIA| 01 30 15 294| SRBIJA SERBIA| 060 0 732 000| لبنان LEBANON| 4414727| Україна UKRAINE| 044 300 13 04
ČESKÁ REPUBLIKA**

CZECH REPUBLIC

| 731 010 111| SINGAPORE| 6550 8900| LIETUVA LITHUANIA| 5 214 0057| UNITED KINGDOM| 0345 602 1454
DANMARK DENMARK| 43 350 350| SLOVENSKO SLOVAKIA| 232 199 930| LUXEMBOURG| 0032 70 23 31 59| U.S.A.| 800-395-8325
24/10/2018|

Date of purchase___
Product reference__
Retailer name and address____

Distributor stamp__

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>