RemoteTech RT-AC8145 Smart Key User Manual
- June 13, 2024
- RemoteTech
Table of Contents
RemoteTech RT-AC8145 Smart Key
Product Information
- FCC ID: 2AOKM-AC5
- IC: 24223-AC5
- Model: RT-AC8145
The Smart Key is a remote transmitter that allows you to control various functions of your vehicle. It features lock, unlock, start, panic, and trunk buttons.
Product Usage Instructions
- LOCK: Pressing the LOCK button will lock the vehicle doors. Note that if a door is not closed properly, the locking action will not be performed. Additionally, if the key is in the ignition switch, the doors cannot be locked using the remote transmitter.
- UNLOCK: Pressing the UNLOCK button will open all the vehicle doors. However, if the key is in the ignition switch, the doors cannot be unlocked using the remote transmitter.
- START: To start the car, press the START button twice.
- TRUNK: Pressing the TRUNK button will open the trunk of the vehicle. Please note that this transmitter does not have the capability to close the trunk.
- PANIC: Pressing the PANIC button will activate the vehicle’s horn and hazard lamps continuously until any button is pressed on the transmitter.
User’s Manual
Smart Key
- FCC ID: 2AOKM-AC5
- IC: 24223-AC5
- MODEL: RT-AC8145
This remote has lock,unlock,start ,panic,trunk buttons,you can open or close
the vehicle with the remote transmitter.
LOCK
- When you press the LOCK button, the vehicle doors will lock. If the door is not close, can not lock the door, also key in the ignition switch also can not lock the doors.
UN LOCK
- When you press the UNLOCK button, you can open the all doors.if the key is in the ignition switch, can not unlock the doors.
START
- When you press 2 times start button, you can start the car. Trunk
- When press the TRUNK buttons,open the trunk.it can not close the trunk using this transmitter.
PANIC
- When press the PANIC button, the vehicle will start sounding the horn and flushing the hazdard lamp until press any buttons on transmitter.
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.IC WARNING: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of thedevice.