One LIGHT 65654CT LED 40W Track Spot 230V Instruction Manual
- June 12, 2024
- one LIGHT
Table of Contents
One LIGHT 65654CT LED 40W Track Spot 230V
DIMENSION
40W I 230V I 50/60Hz I IP20 I Adjustable I Aluminium Complete with 1050mA driver .
INSTRUCTION
- To mount the track adaptor into the track system, first check that the selector knob A is at OFF position and the adaptor lock B ) is disengaged.
- When installing the adaptor into the track, ensure that it is orientated correctly.
- Rotate adaptor lock B ) clockwise go to connect the adaptor to the neutral circuit.
- Rotate selector knob A to the position of desired circuit.
- Circuit 1: Rotate the knob A go0 clockwise from the starting position OFF, to connect circuit 1.
- Circuit 2: Rotate the knob A go0 anti-clockwise from the starting position OFF, to connect circuit 2.
- Circuit 3: Rotate the knob A 180° clockwise from the starting position OFF, to connect circuit 3.
Warnings:
- Make sure that the product is installed properly before connecting to electricity.
- Do not cover the fitting.
- Maintenance and installation should only be carried out by a professional electrician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>