THRUSTMASTER T-LCM Pedals PC PlayStation 4 Xbox One User Manual

THRUSTMASTER T-LCM Pedals PC PlayStation 4 Xbox One User Manual

Before using this product, please read this user manual carefully and save it for later reference.

TECHNICAL FEATURES

General overview

1. Removable USB cable; USB connector on the back of the pedal set

2. Removable RJ12 cable; RJ12 connector on the back of the pedal set

3. Medium resistance, preinstalled by default
   (1 black F20 spring + 1 grey F15 spring)
   (+ 1 central chrome-plated preloading spring)
   (+ 2 spacers without markings)

4. 1 white F10 spring

5. 2 red F30 springs

6. 2 spacers with red markings (specifically designed for use with the red
   F30 springs)

7. 2.5 mm Allen key

8. 5 flat washers (to decrease or eliminate the preloading of the central chrome-plated spring)

9. Plastic pedal head support for vertical inclination of pedals.
   Spacers
   2 types of spacers are included. It is important to use the proper type of spacer, depending on the type of spring selected.

 |

Spacers without color markings (and with grooves) For use with the following springs: White F10 Grey F15 Black F20

---|---
|

Spacers with red markings (and without grooves) Specifically designed for use with the following springs:
Red F30

Pedal arms and heads

10. Metal pedal arm with 4 holes
11. Plastic pedal head support (to be positioned between the pedal head and arm) with 4 holes
12. Metal pedal heads (with different numbers of holes: 9 for the accelerator pedal; 6 for the brake pedal; 6 for the clutch pedal)

CALIBRATION SOFTWARE

VERY IMPORTANT
This procedure must be followed when changing the brake pedal’s resistance.
Connect the pedal set to a PC using the removable USB cable (1).
The removable RJ12 cable (2) must not be connected to the pedal set during this procedure.

Visit https://support.thrustmaster.com. Click Racing Wheels / T-LCM Pedals, then select Software.

Download and install the calibration software:

• To adjust the dead zones at the beginning of the range of travel on all three pedals to your liking.
• To adjust the dead zones at the end of the range of travel on the accelerator pedal and clutch pedal to your liking.
• To adjust the electronic force (Brake Force) on the brake pedal to your liking.

Once the different settings have been properly configured, click APPLY, and then disconnect the removable USB cable (1). The settings are saved in the pedal set’s internal memory: they will be effective in all of your games, on PC and game consoles.

UPDATING THE PEDAL SET’S FIRMWARE

In order to update the firmware, the pedal set must be connected to a PC via the removable USB cable (1).
The firmware included in the pedal set can be updated with more recent versions allowing for product improvements.
The firmware version is displayed in the lower left-hand corner of the calibration software.
To update the pedal set’s firmware: on PC, visit : https://support.thrustmaster.com, click Racing
Wheels / T-LCM Pedals, then select Firmware and follow the download and installation instructions and procedure.

ATTACHING THE PEDAL SET TO A SUPPORT OR COCKPIT

The pedal set can be attached to a variety of different compatible supports (sold separately) using the five M6-type screw threads located underneath the base. To do so, screw at least two M6 screws (not included) through the support shelf, and into the screw threads on the underside of the pedal set’s base. Important: the length of the M6 screws must not exceed the thickness of your support by more than 0.47 inches/12 mm, so as not to risk damaging the pedal set’s internal components.

The pedal set’s setup diagrams for cockpits and other supports are available athttps://support.thrustmaster.com: click Racing Wheels / T-LCM Pedals, and then Template – Cockpit setup.

MECHANICAL SETTINGS FOR THE PEDAL SET

Adjusting the height of the pedals

• Using the included 2.5 mm Allen key (7), unscrew the two screws holding the metal pedal head (11) and its plastic support (10) in place.
• Choose your preferred position in terms of height, and then fasten everything together again using the screws.

Examples with the accelerator pedal:

Low position

High position

Number of different height positions per pedal:

• 3 for the accelerator pedal
• 2 for the brake pedal
• 2 for the clutch pedal

Adjusting the spacing of the three pedals

• Using the included 2.5 mm Allen key (7), unscrew the two screws holding the metal pedal head (11) and its plastic support (10) in place.
• Choose your preferred position (to the left, centered or to the right), and then fasten everything together again using the screws.

Examples with the brake pedal:

Left position

Centered position (by default)

Right position
Number of different spacing positions per pedal:

• 3 for the accelerator pedal
• 3 for the brake pedal
• 3 for the clutch pedal

Adjusting the inclination of the pedals

• Using the included 2.5 mm Allen key (7), unscrew the two screws holding the metal pedal head (11) and its plastic support (10) in place.
• Next, rotate the plastic pedal head support (10) 180° (or change it), and then fasten everything together again using the screws.

Examples with the accelerator pedal:

Less inclined position

More inclined position (by default)

Vertical position

Number of different inclination positions per pedal:

• 3 for the accelerator pedal
• 3 for the brake pedal
• 3 for the clutch pedal

Adjusting the alignment of the pedals

• Install the plastic pedal head support (10) to move a pedal forward.
• Remove the plastic pedal head support (10) to move a pedal back.

Examples with the accelerator pedal:

Forward position (by default)

Back position

Changing the brake pedal’s resistance

• Disconnect the pedal set from the PC or game console and push down firmly on the washer of the upper retaining head (G) (located at the back of the pedal), and then pull this component backward to free it from the metal arm.

Remove the different elements from the holding rod (B).

A Load Cell force sensor
**Never to be removed from the holding rod!
B Holding rod for springs column
C Central 4-spiral chrome-plated preloading spring
D Rubber spacer
E Plastic spacer
F Main 7-spiral springs
(F10, F15, F20, F30)
G Upper retaining head with washer
The brake pedal’s resistance can be adjusted by replacing or mixing the main F** springs:

• Reposition the different elements and the main springs (F10, F15, F20 or F30) of your choice (along with the appropriate spacers) on the holding rod.

resistance
2 red F30 springs| Strong resistance

Don’t hesitate to mix and test out the different springs (a variety of different combinations are possible) in order to find the level of resistance that suits you best.

Once you have modified the resistance, connect the pedal set to a PC via the removable USB cable (1), then carry out a new calibration of the brake pedal via the calibration software. This new calibration (corresponding to the new brake pedal resistance) will automatically be saved in the pedal set’s internal memory, and will be effective in all of your games on PC and game consoles.
VERY IMPORTANT
The pedal set’s default calibration at the factory is carried out with one greyF15 spring and one black F20 spring (medium resistance). In the event that you change the springs (and therefore the brake pedal’s resistance), you must recalibrate the brake pedal using the calibration software on PC: should you fail to do so, the brake pedal will not function properly on PC or game consoles

Decreasing or eliminating the brake pedal’s preloading effect

For users who prefer more linear braking resistance, it is also possible to decrease or eliminate the preloading effect of the central chrome-plated preloading spring (C).

To do so, slide 1 to 5 flat washers (8) onto the holding rod, in the middle of the central  preloading spring (C).

Please note: The more flat washers you add, the more the preloading effect will be decreased (or eliminated altogether, in the event that you use all 5 flat washers).

**Example of eliminating the preloading effect by using all 5 flat washers:

Important:
**Adding these flat washers will also have the effect of reducing the brake pedal’s mechanical travel.

USING THE PEDAL SET WITH A THRUSTMASTER RACING WHEEL BASE = REMOVABLE

RJ12 CABLE (2) REQUIRED

(The removable USB cable (1) must not be connected to the pedal set during this type of use.)
COMPATIBILITY: PC AND GAME CONSOLES

Important:

In order to ensure optimal operation of the pedal set connected directly to a Thrust master racing wheel base (TS-PC Racer, T-GT, T300, T150, TSXW, TX and TMX), you must update the racing wheel base’s firmware withthe latest version available athttps://support.thrustmaster.com. This new firmware will let you get the most out of the T-LCM Pedals pedal set’s high level of precision, and use your personal settings made via the calibration software.

• Once the Thrustmaster racing wheel base’s firmware has been updated, connect the pedal set at the back of the racing wheel base using the removable RJ12 cable (2).
• Connect the racing wheel to your PC or game console.
• The MODE LED on the base of your racing wheel flashes 5 times to indicate that the pedal set is properly recognized, for optimal operation.

In the event that the MODE LED does not flash as indicated above, this indicates that the base of your racing wheel has not been updated with the latest available firmware, and that the pedal set is not recognized as a high- precision T-LCM Pedals pedal set, but rather as a standard T3PA or T3PA PROtype pedal set.
YOU ARE NOW READY TO PLAY!

Please note: In this configuration, an official Thrustmaster wheel rim must be installed on the base of your racing wheel. Failure to do so will result in the pedal set not being recognized as a high-precision TLCM Pedals pedal set.

USING THE PEDAL SET WITH A NON-THRUSTMASTER RACING WHEEL (ALSO POSSIBLE

WITH A THRUSTMASTER RACING WHEEL BASE) = REMOVABLE USB CABLE (1) REQUIRED

COMPATIBILITY: PC ONLY

• Connect the pedal set to one of your PC’s USB ports using the removable USB cable (1), and finish installing the drivers.
• When installation of the drivers is complete, click Finish and restart your computer

YOU ARE NOW READY TO PLAY!

Notes for PC when the pedal set is connected via the USB cable:

• The pedal set is compatible with all racing wheels on the market in games supporting multi-USB connection and separate pedal sets.
• Remember to always completely close the Game Controllers window (by clicking OK), as well as the pedal set’s calibration software, before starting your game.
• The pedal set’s firmware version is displayed in the lower left-hand corner of the calibration software.

OVERVIEW OF HOW TO CONNECT THE PEDAL SET ACCORDING TO THE RACING WHEEL

AND PLATFORM BEING USED

| Pedal set connection
---|---
O n GAME CONSOLE with THRUSTMASTER RACING WHEEL| Removable RJ12 cable (2)
On PC with THRUSTMASTER RACING WHEEL| Removable RJ12 cable (2) or removable USB cable (1)
On PC with non-Thrustmeter racing wheel| Removable USB cable (1)

WARNING
**For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet.
THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES. Warning – Electrical shock**

• Keep the product in a dry location and do not expose it to dust or sunlight.
• Respect the connection polarities.
• Do not twist or pull on the connectors and cables.
• Do not spill any liquid on the product or its connectors.
• Do not short-circuit the product.
• Never dismantle the product (apart from any adjustments outlined in this user manual). Do not throw it onto a fire, and do not expose it to high temperatures.

Warning – Injuries due to repeated movements
Playing with a pedal set may cause muscle or joint pain. To avoid any problems:

• Avoid lengthy gaming periods (take 10 to 15-minute breaks after each hour of play).
• If you feel any fatigue or pain in your legs or feet, stop playing and rest for a few hours before you start playing again.
• If the symptoms or pain indicated above persist when you start playing again, stop playing and consult your doctor.

Warning – Pedal set pinching hazard during gaming sessions

• Keep the pedal set out of the reach of children.
• During gaming sessions, never place your fingers (or other parts of your body) on or near the pedal arms.

NEVER

VARIOUS TIPS AND TRICKS (not included in this manual)
Various tips and tricks are available at https://support.thrustmaster.com: click Racing Wheels / TLCM Pedals.

CONSUMER WARRANTY INFORMATION
Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to bring an action for conformity with respect to this product. In the countries of the European Union, this corresponds to a period of two (2) years from delivery of the Thrustmaster product. In other countries, the warranty period corresponds to the time limit to bring an action for conformity with respect to the Thrustmaster product according to applicable laws of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty period shall be one (1) year from the original date of purchase of the Thrustmaster product).
Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6) months from the date of original purchase.
Should the product appear to be defective during the warranty period, immediately contact Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be returned to its place of purchase (or any other location indicated by Technical Support). Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option, be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is subject to such reconditioning, any period of at least seven (7) days during which the product is out of use shall be added to the remaining warranty period (this period runs from the date of the consumer’s request for intervention or from the date on which the product in question is made available for reconditioning, if the date on which the product is made available for reconditioning is subsequent to the date of the request for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries (including for consequential damages) is limited to the return to working order or the replacement of the Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a particular purpose.
This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause unrelated to a material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) if the product has been used for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example); (3) in the event of failure to comply with the instructions provided by Technical Support; (4) to software, said software being subject to a specific warranty; (5) to consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset or headphone ear pads, for example); (6) to accessories (cables, cases, pouches, bags, wrist-straps, for example); (7) if the product was sold at public auction.
This warranty is nontransferable.
The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her country are not affected by this warranty.

Additional warranty provisions
During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any reconditioning procedures which Technical Support may request that the consumer carry out, by way of written instructions – for example, due to the simplicity and the lack of confidentiality of the reconditioning process – and by providing the consumer with the required spare part(s), where applicable).
Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product whose warranty period has expired.
In the United States of America and in Canada, this warranty is limited to the product’s internal mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any third party for any consequential or incidental damages resulting from the breach of any express or implied warranties. Some States/Provinces do not allow limitation on how long an implied warranty lasts or exclusion or limitation of liability for consequential or incidental damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State or Province to Province.

Liability
If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries disclaim all liability for any damages caused by one or more of the following: (1) the product has been modified, opened or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive use, negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all liability for any damages unrelated to a material or manufacturing defect with respect to the product (including, but not limited to, any damages caused directly or indirectly by any software, or by combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).

TECHNICAL SUPPORT

https://support.thrustmaster.com

DECLARATION OF CONFORMITY
CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

COPYRIGHT
© 2021 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. PlayStation® is a registered trademark of Sony Interactive Entertainment Inc. Windows® is a registered trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks and brand names are hereby acknowledged and are property of their respective owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another. Made in China.

ENVIRONMENTAL PROTECTION RECOMMENDATION

In the European Union: At the end of its working life, this product should not be disposed of with standard household waste, but rather dropped off at a collection point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling.
This is confirmed by the symbol found on the product, user manual or packaging.
Depending on their characteristics, the materials may be recycled. Through recycling and other forms of processing Waste Electrical and Electronic Equipment, you can make a significant contribution towards helping to protect the environment.
Please contact your local authorities for information on the collection point nearest you.
For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.

Retain this information. Colours and decorations may vary.
Plastic fasteners and adhesives should be removed from the product before it is used.
www.thrustmaster.com
*Applicable to EU, UK and Turkey only

References

• Thrustmaster | Wheels, Joysticks and Gamepads for video games
• Thrustmaster - Technical support website
• Thrustmaster - Technical support website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>