ASUS B650M-E TUF Gaming Motherboard User Guide
- June 12, 2024
- Asus
Table of Contents
ASUS B650M-E TUF Gaming Motherboard
TUF GAMING B650M-E
The TUF GAMING B650M-E is a motherboard designed for gaming enthusiasts. It features a compact micro-ATX form factor and supports the latest AMD B650 chipset. With its high-quality components and robust design, this motherboard provides excellent performance and durability for gaming systems.
Product Specifications
- Form Factor: Micro-ATX
- Chipset: AMD B650
- CPU Socket: AM5
- Memory Slots: 4 x DDR5 DIMM slots
- Expansion Slots: 1 x PCIe x16 slot, 2 x PCIe x1 slots
- Storage: 4 x SATA 6Gb/s ports, 2 x M.2 slots
- USB Ports: 5 x USB 2.0 ports, 6 x USB 3.2 Gen 1 ports, 2 x USB 3.2 Gen 2 ports
- Audio: Realtek ALC887 audio codec
- Networking: Gigabit Ethernet
Product Usage Instructions
Step 1: Install the CPU
- Open the CPU socket on the motherboard.
- Gently place the CPU into the socket, aligning the notches or markers on the CPU with those on the socket.
- Carefully lower the CPU retention lever to secure the CPU in place.
Step 2: Install the CPU Fan
- Locate the CPU fan header on the motherboard.
- Attach the CPU fan to the CPU fan header, aligning the pins or connectors.
- Ensure that the CPU fan is securely attached and the cables are properly connected.
Step 3: Install Memory Modules
- Locate the DDR5 DIMM slots on the motherboard.
- Insert the memory modules into the slots, aligning the notches on the modules with those on the slots.
- Apply gentle pressure on both ends of the memory modules until they click into place.
Step 4: Install Storage Devices
- Identify the SATA 6Gb/s ports and M.2 slots on the motherboard.
- Connect the SATA cables from your storage devices to the SATA ports.
- If installing M.2 storage devices, refer to the user manual for detailed instructions.
Step 5: Connect Power Cables
- Connect the ATX power connector from the power supply to the ATX power socket on the motherboard.
- Connect any additional power cables required by your components (e.g., PCIe power cables).
Step 6: Connect Peripherals
- Connect your monitor, keyboard, mouse, and other peripherals to their respective ports on the motherboard.
Step 7: Complete Setup
- Double-check all connections and ensure everything is securely attached.
- Close the computer case and tighten any screws or fasteners.
- Connect the power supply to a power source and turn on the computer.
If you encounter any issues or require further assistance, please refer to the user manual or contact ASUS Customer Service.
Motherboard Layout
Quick start guide
Step 1
Install the CPU
Step 2
Install the CPU fan
Step 3
Install memory modules
NOTE: Remove the screws and the retention module only. Do not remove the plate on the bottom.
Step 4
Install storage devices. To install M.2, refer to user guide.
Step 5
Install expansion card(s)
Step 6
Install the system panel connector
Step 7
Install AT power connectors
Step 8
Connect input/output devices
Step 9
Power on the system and install operating system and drivers
Australia Statement Notice
From 1 January 2012 updated warranties apply to all ASUS products, consistent
with the Australian Consumer Law. For the latest product warranty details
please visit https://www.asus.com/support/. Our goods come with guarantees
that cannot be excluded under the Australian Consumer Law. You are entitled to
a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
If you require assistance please call ASUS Customer Service 1300 2787 88 or
visit us at https://www.asus.com/support/.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>