one LIGHT 7841B Smart Solar LED Street Light Instruction Manual
- May 15, 2024
- one LIGHT
Table of Contents
one LIGHT 7841B Smart Solar LED Street Light
INSTALLATION MANUAL
A. CUT
The LED strip can be cut every 5cm at the clearly marked positions. Cut
carefully at the desired length by using a sharp pair of scissors.
B. CONNECT
Connect the power supply cable to 24V DC driver.
Warnings
- The mounting surface must be clean, dry and free from dust or grease.
- Make sure that the product is installed properly before connecting to electricity.
- Do not bend, fold or twist the LED strip.
- Do not bend to install in corners.
- Do not put excessive pressure on surface of LED strip.
- Do not cover LED strip with any materials.
- Do not install in ambient temperatures below -10°C or exceeding 45°C.
- Always handle the LED strip with care.
- The LED strip should not be exposed to direct sunlight.
- LED strips with different batch numbers may have slight variations in colour consistency (CCT ± 150K).
- Maintenance and installation should only be carried out by a professional electrician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>