CTA PAD-PCGKMINI6 Protective Case with Built-In 360 Degree Rotatable Grip Kickstand Instruction Manual
- June 12, 2024
- CTA
Table of Contents
CTA PAD-PCGKMINI6 Protective Case with Built-In 360-Degree Rotatable Grip
Kickstand
Features
INSTRUCTIONS
If your iPad has a previously installed screen protector, please remove it before continuing.
How to insert the tablet into the case.
- Remove the external silicone sleeve by peeling it away for the internal hard case
- Gently apply pressure to the small clips (as indicated by the arrows) and unzip all four sides. Once all the sides are unclipped, the internal hard case will open.
- Insert the iPad into the rear cover.
- Once the iPad is inside the rear cover, place the internal front cover on top and gently dip all four sides into position. Reinstall the external silicone rubber sleeve.
How to flip out Kickstand
- Locate the kickstand at the case rear and fold it out underneath the strap.
- Display the tablet at a desired viewing angle.
- Press the kickstand back in to return to handheld mode.
How to use in handheld
- Identify the velcro hand strap and adjust it to the fitted size. Insert your hand as shown and you’re ready for mobile setup.
Identify corner clips and loop carry strap hooks onto them.
36 Taaffe Place Brooklyn, NY 11205
support@ctadigital.com
778-991-0169
www.ctadigital.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>