imin 121D01 D1 New Gen All In One POS Device User Manual
- June 12, 2024
- imin
Table of Contents
imin 121D01 D1 New Gen All In One POS Device
Introduction
Printer User Guide
- Unscrew the printer cover and the paper compartment door pops open;
- Insert the thermal paper and pull out part of it outside the paper exit of the printer, then close the paper compartment cover;
- After printing, tear the paper upwards.
Technical Specifications
OS| Android 11 Go Edition (suitable for 2GB RAM)/ Android 11 (suitable for 4GB
RAM)
---|---
CPU| 8-Core,2x A75 and 6x ASS,1.8GHz
Main LCD Display| 10.1 inches,resolution: 800x 1280,multi-touch capacitive
screen
Secondary LCD Display| 2.4 inches,resolution: 240x 320
Storage| 2GB RAM {optional 4GB)+ 16GB ROM
Camera| 0.3M,FF
Wi-Fi| Support 802.11a/b/g/n/ac
Bluetooth| 5.0BLE
CardSlot| 2xSIM
Network| 2G/3G/4G
NFC| Optional,default none
Printer| 58mm thermal printer,support the paper roll with maximum 40mm
diameter
Speaker| 1.SW
External Interface| 1x DC-in,1x RJ12 (12-24V),1x RJ45,2xType-A port,1xSIM
CardSlot
Power Adapter| Output power 36W,Input: AC100N240V/1.SA,Output: DC24V/1.SA
MachineSize| 250.2mmx 171.9mmx 80.5mm
OperatingTemperature| 0°Cto+S0°C
StorageTemperature| -20°c to+60°(
Operating Humidity| 10% to 90% r.H.
Limit Altitude| Max. 5000 meters
Name and Content of Toxic and Harmful Substances in This Product
- 0: Means that the content of the toxic and harmful substances in all homogeneous materials of the component is below the limit specified in SJ/ tl 13363-2006.
- X: Means that the content of the toxic and hazardous substances at least in a homogenous material of the component exceeds the limit specified in SJ/ tl 13363-2006. However, the components marked with “X” in the above table are out of proportion because there is no mature alternative technology in the industry at present. Products that have reached or exceeded the environmental protection service life should be recycled and reused in accordance with the electronic information products control and management measures or local environmental laws and guidelines. They should not be discarded at will or with household waste.
Product Warranty Card
- Model No.: 121001
- Serial No.: ___ _
- Purchase Date: ____
- Warranty Period: The warranty period commences on the date of purchase. We offer 365 days warranty service.
- User Phone: __ _
- User Address: ____
iMin does not warrant against the following:
- Disassembled or repaired product by unauthorised service provider without our consent.
- Damaged product barcode, fragile sticker and altered or defective warranty card.
- Damage caused by non-compliance with instructions in this user manual.
- Damage caused by exposure to sources of liquid, dripping or splashing, normal wear and tear, accident or abuse.
- Failure or damage as a result of any Force Majeure Event.
- Expired warranty period.
Packing Content
- 1Device x 1
- 1 Power Adapter x 1, Power Cable x 1
- 1 Printing Paper x 1, Ejector Pin x 1
- 1 User Manual x 1
Safety Information
Safety and Handling
- Please plug-in power adapter to on ly its correspondi ng AC socket.
- Do not use in explosive gas atmosphere.
- Do not disassemble the equipment. It should be serviced or recycled on ly by i Min or an authorised service provider.
- This is a Grade B product. The product may cause radio interference and interfere with medical devices. The user may be required to take practical measures to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
About the battery replacement:
- Do not attempt to replace the battery yourself-you may damage the battery, which could cause overheating, fire and injury.
- The replaced/ used battery should be disposed according to local environmental laws and guidelines. Do not dispose in fire. It should be serviced or recycled by iMin or an authorized service provider and must be recycled or disposed of separately from household waste.
Company Statement
Our company is not responsible for the following actions:
- Damage caused by misuse, lack of care in maintaining the equipment, or placing the device under conditions that may cause undesired operation and risk as specified in this instruction manual.
- We will not be responsible for any damage or problem caused by third-party parts or components (other than the original products or approved products provided by us). Without our consent, you have no right to modify or alter the products.
- The operating system of this product is supported by official regular OS update. If the user breached the third party’s ROM system or changes the system file by hacking, it may cause unstable, undesired system operation and bring security risk.
Advice
- Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog.
- Do not use the device in extremely cold or hot environments eg, near a fire or lit cigarette.
- Do not topple, throw, or bend.
- Use in an optimally clean and dust-free environment to avoid tiny particles clogging and seeping through gaps in the device.
- Do not at tempt to use the device near medical equipment. Important Safety Information
- Do not install or use during thunderstorms and lightning conditions, otherwise, there will be risk of electric shock, injury or death in the event of thunder or lightning hit.
- If you find unusual odour, overheating or smoke, please cut off the power immediately.
- Do not expose the device to moisture, dampness, or wet weather, such as rain, snow or fog; Do not use in an explosive gas atmosphere.
Disclaimer
Due to regular updates and enhancements made to the product, some details of
this document may be inconsistent with the physical product. Please take the
product you received as the current standard. The right to interpret this
document belongs to our company. We reserve the right to amend this
specification without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>