KERNOWO 106 LED 3000LM Solar Powered Motion Sensor Flood Lights User Manual
- June 9, 2024
- KERNOWO
Table of Contents
KERNOWO 106 LED 3000LM Solar Powered Motion Sensor Flood Lights
INSTALLATION
Press the button on the back and select the desired mode. Then choose a place that can get enough sunshine to install this wall light. The longer it gets sunshine, the longer the lights can last.
-
FIX THE BASE(pic 1):
Punch two holes on the wall with a drill bit,
Insert the attached expansion pillar-hinge into holes, drill the screws through the base into the wall. -
CHOOSE THE ANGLE,INSTALL THE LIGHT(pic 2): install the adjustable pivot arm part to the back, attach the pivot arm to the base, adjust the desired angle then tighten it through the knob screw.
OPERATION GUIDE
The default mode of the product is OFF mode. Press the back button or use the remote control to adjust modes using the light.
Lighting Modes
Press once to enter into MODE 1
Automatically detect the changes in the brightness of the external
environment. When the brightness is low enough, it will automatcally switch
from energy- saving mode tolighting mode without motion detection (Auto on at
night Auto offat sunrise).
Press twice to enter into MODE 2
In dark the light will automatically turn on the Low Light lighting. When the
sensor detects people coming it will enter Strong Light lighting, and after
the person leaves for 15s will back to Low Light lighting.
Press three times to enter into MODE 3
When detect people are coming, it will auto turn ON with Strong Light. After
the person leaves for 15s will auto turr OFF the light.
Press four times to enter into MODE 4(SOS)
In dark the light will automatically turn on the the light which would flashes
continuously.
OFF
Based on Mode 4, press the power button again, the LED Solar Sensor Wall light
power off.
WARM TIPS
- It is recommended to turn off the light and charge it under direct sunlight for 1-2 days before the first use. Make sure the product has enough power.
- During the installation, please make sure the LED Solar Sensor Wall light is installed under direct sunlight where there is no shade or eave to shelter the solar panel. Otherwise, the lighting time will be shorter.
- That whether the LED Solar Sensor Wall light can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather conditions, seasons, and other conditions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>