IZZO SWAMI VIBE Micro USB Device User Guide
- June 5, 2024
- IZZO
Table of Contents
SWAMI VIBE QUICK START
CHARGING
- Insert the micro USB charging end into the Swami Vibe & then insert the USB end of the charging cord into a USB charging port or AC adapter (included). The recommended USB charging rate is 5V, 1A.
- A complete full charge will take roughly 6 hours of charging time.
BUTTON DESCRIPTION & SCREEN LAYOUT
A. [POWER] Button: Hold to power on. Hold to power off.
B. [OK] Button: Press to select options and toggle between Green,
Hazards, & Scorecard. Press & hold to return to the previous screen.
C. [UP] Button: Press to scroll up, change holes.
D. [Down] Button : Press to scroll down, change holes.
E. [PLAY/PAUSE] Button: Press to play music, press again to pause
F. [BT CONNECTION] Button: Press & hold to connect. Activate Bluetooth on
the smartphone. Then, Hold the [BT CONNECTION] Button. The indicator light
flashes blue while searching for a device to pair. Select “SWAMI VIBE” on your
smartphone, the indicator light stops flashing when paired.
G. [VOLUME UP] Button: Press once to raise the volume. Press twice to
skip to the next song
H. [VOLUME DOWN] Button: Press once to lower volume. Press twice to go
back to a song
USING SWAMI ON THE COURSE
Select the PLAY option from the Main Menu and press the [OK] button. The Swami Vibe will search for surrounding courses that the device supports once courses download. Use the [UP] and [DOWN] buttons to select your golf course, then press the [OK] button.
- PLAY MODE will display the distance to the Front, Center & Back edge of the green for the current hole.
- While in PLAY MODE, press the [OK] button to access the HAZARD SCREEN. To return to the PLAY MODE screen (distances to green) press [OK] again.
- To access the SCORECARD, press the [OK] button while on the HAZARD SCREEN. Press the [UP] or [DOWN] buttons to enter your score, then press the [OK] button again to return to the PLAY MODE Screen (distances to green). NOTE: SCORECARD can only be used if turned ON in Settings.
- While in PLAY MODE, press the [OK] button to access SHOT DISTANCE MODE. Then travel from where you hit your shot to your ball. The distance that the shot traveled will be displayed. To return to the PLAY MODE Screen (distances to green), press the [OK] button.
NOTE: SHOT DISTANCE can only be used if turned ON in Settings.
MAGNET
The Swami Vibe contains a strong magnet inside the unit. Use the magnet to attach to a metal surface for hands-free use on the course. To attach, simply line up the back of the unit with a metal surface & allow the magnet to connect before letting go. To view the complete user manual visit: WWW.IZZO.COM
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation. RF warning statement: The device has been evaluated to
meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>