Consonance Trio 12 Tonearm User Guide
- June 12, 2024
- Consonance
Table of Contents
Trio 12 Tonearm
User Guide
Package contents
The consonance Trio tonearm is packaged in special designed box to ensure it safety on the way. Please check the diagram in below picture and in the part list description:
1-①. RCA connector
1-②. arm lift
1-③. Aluminium tube
1-④. Headshell
1-⑤. Anti-skate weight
2. Counterweight
3. Allen wrench
Adjusting the Anti-skate
a. Power off the turntable.
b. Reverse the Strobe Disc. Place on platter.
c. With the aid of the arm-lifter, gently lower the stylus onto the smooth
surface near the outer edge of the Strobe Disc.
d. Gently rotate the platter in the direction of play (Clockwise).
c. Adjust rider weight (Part no.12) to ensure the cartridge moves parallel
with the outer rim of the Strobe Disc and exhibits no excessive sideways
movement in either direction.
TECHNICAL SPECIFICATION
| Mounting distance arm base | 290mm |
|---|---|
| Tone arm length | 12” |
| Overhang Offset | 12mm |
| Cartridge weight | 17 degree 4-22g |
| Mass (without counterweight) | 68g |
| Counterweight | 65g |