TESLONG NTS600 Digital Borescope User Manual

Digital Borescope
User Manual
Model No.: NTS600
FCC ID:2AXAVNTS600C07

Overview

Features

• 6-inch HD IPS Screen
• 180°Image Rotation
• Split Screen View (Only for Dual/Triple Lens)
• Led Camera Lights & Led flashlight
• Detachable Probe Design
• Supports Wif i Connection
• PD Fast Charging

Applications

• Automotive or diesel repair and maintenance
• Inspection of hard-to-reach or hard-to-see areas or equipment, plumbing, construction & restoration applications
• Scientific education
• Outdoor exploration
• Rescue security

Safety
WARNING! Please read all safety warnings and instructions before using this product. Failure to follow these warnings may result in electric shock, fire or serious injury.

• Keep the tool dry, clean, free from oil, water, gas or other materials that may cause corrosion.
• This appliance is not intended to use for people with limited physical, sensory or mental capabilities.
• This appliance is not intended for medical use. Keep bystanders or children away while operating the tool.

Maintenance

• Keep the camera lens clean.
• Keep the working area clean.
• Charge the device at least once every 3 months if it is left unused for a long time to prevent damage to the battery.

Specifications

Camera & Cable IP67
Light Source| Adjustable led camera lights Led flashlights on the back of device
Others| Operating Temperature| -4℉ to 140℉ (-20℃ to 60℃)
---|---|---
Power Source| 5000mAh Lithium Polymer Battery
Runtime| About 4h
Charging Time| About 4h
Input| 5V   1.5A /9V   1.5A/12V   1.2A Support PD Fast Charging
Work Voltage| 3.7V

• For more probe/cable options please visit the official Teslin website and store: Teslong.com.
  NOTICE: Should you need replacement(s) of any other components, please contact our customer service for help.

Functions

1. Cable Port

2. Photo/Video Button:
   Press , Photo Taking/Video Recording Start/End
   Hold, Switch the camera view

3. UP button

4. OK button: Confirm selection/Video Play/Pause

5. Setting Button：
   Press, Enter/Exit setting menu
   Hold, Turn On/Off WiFi connecting
   Delete Photo/Video (Album Menu）

6. Camera light button: Adjust the brightness of Led camera lights

7. Mode button: Photo taking/video recording/Album

8. Down/Rotate button

9. Power button: Hold the button to turn the device on/off

10. Led flashlight

11. Speaker

12. Type-C Port

13. TF card slot

14. HDMI Port

15. Reset button

16. Microphone

17. Angle adjustment Button

18. Led flashlight button

Using your inspection camera

1. Remove the plastic screen cover before using this device.
2. Connect the cable to the monitor (make sure the camera is connected firmly to prevent noisy image on the screen)
3. Power ON/OFF (Press and hold the Power Button to turn on the device).
4. The device is equipped with a TF memory card(inserted). Please make sure it’s installed before use.

How to insert TF card:

• Power Off the device first before inserting TF card.
• Make sure the orientation of the TF card is correct when inserting into the slot.
• Do not use excessive pressure when inserting or removing the TF card from the slot.
• Only take photos or record videos when a TF card is inserted.
• This device requires Class 10 high speed TF card and it will not be able to work properly with Class 4 low speed card.

Instruction of Power Button Lighting

| Device Running: Green LED stay on
---|---
Charging(Device on): Green/Orange LED flashes
Charging(Device off): Orange LED stay on

Modes & Setting

Switch take photos and video recording

Press to switch to “take photo” mode, and press to take a photo.

Press to switch to “video recording” mode, and press to start recording.
In any modes, press the“ ” button twice to enter the system settings menu.
Click button to select and OK button to save the changes.
The default language is English, and the system supports English, Chinese, German, French, Spanish, Italian, Russian and Japanese.
How to Switch the view of Camera (Only for Dual/Triple Lens)
Hold the photo button to switch the view of the Front Camera/Side Camera.

WiFi Connecting: how to display the image on your Phone/Pad/Tablet

https://gto.so/smart-endoscope
Use your phone to scan the QR code and download “Smart Endoscope” app.

Open the device WIFI

Connect the WiFi (At this time, the host’s WIFI indicator blinks.)

Start display the image on your phone/pad/tablet

Click the button in the app to set up the device and start using it with your smartphone.

Run the app.
Please note Photo Taking/Video Record only supported by your Phone/PAD/Tablet (not available for the endoscope device) in the WiFi mode
Scan the QR code or enter the activation code printed on the card to remove the ads in the app.

Transfer photo/video f iles to your computer

1. Use a TF card reader to Transfer data directly.
2. Contact your computer with Type-C Sub cable to transfer f lies.
   Pull out probe camera first before using USB cable.

Please use a USB wall charger that supports PD fast charging and the appropriate cable to charge your device.

If the device crashes, please press the reset button to restore it.
EU Environmental Protection
Waste electrical products should not be disposed with household waste.
Please recycle where facilities exist. Check with your local authority or retailer for recycling advices.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Customer Service
Please contact us if you have any product quality problems, we would love to hear from you.
12-month Limited Warranty
Lifetime Technical Support
support@teslong.com
info@teslong.com
1-877-899-8809 (US)
(Mon-Fri 8:00 AM-5:00 PM PST)
www.teslong.com
@TeslongInc

TESLONG NTS600 C0510V1.1
3.06.04.001001

References

• Inspection Cameras: Borescopes, Endoscopes, Otoscopes, Thermal imaging — Teslong
• Inspection Cameras: Borescopes, Endoscopes, Otoscopes, Thermal imaging — Teslong

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>