Pixel P80 RGB Led Video Panel Light Lamp User Manual

: June 12, 2024
: PIXEL

Table of Contents

P80 RGB Led Video Panel Light Lamp
INTRODUCTION
PART NAME
ICONS
ICON INSTRUCTION
INSTALLATION
SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

P80 RGB Led Video Panel Light Lamp
User Manual P80 RGB
User manual

P80 RGB Led Video Panel Light Lamp

INTRODUCTION

Thank you for purchasing our product!
P80 RGB
FULL COLOR PROFESSIONAL VIDEO LIGHT
P80 RGB is a full color professional video light with lightweight and compact body. It also features excellent performance, such as 4 working modes, 0 ~ 360° full color of hue, wide and adjustable bi-color temperature ranged from 2500K to 10000K, RGBW mode and 10 special effects, which is extensively used in a variety of shooting. Besides, there is stepless dimming and fast dimming of 0%, 1%, 25%, 50%, 75%, 100% intensity. With the GP grouping, CH wireless channel and app control functions to enhance light control experience, the light setting and shooting can be more smoothly.
WARNING

Before using this product, please read this manual carefully and keep it properly for subsequent reference.
Do not put the light in the place with high temperature or high humidity.
Do not touch the product with wet hands, immerse it into water or expose it in the rain.
Do not put the product near liquids, other flammable or volatile solvents to avoid damage to the product.
Please keep the product properly and out of the reach of children.
Do not use the product in humid environment, otherwise it will cause short circuit or electric shock.
With temperature protection, the light enters protection mode when there is over temperature situation, and it can be used again when the temperature lowers to normal.
Do not disassemble or modify the product. If the product is broken due to a fall or other accidents, please send it to the repair center authorized by manufacturer for inspection and repair.
The product malfunctioned by improper use is not under the warranty, please contact the manufacturer for a paid repair.

PART NAME

Metal Barn Doors
LED Lamp Beads
Control Panel
Tightening Knob
Tightening Knob
U-shaped Bracket
Four-Way Button
Display Screen
Working Mode
Fast Intensity Adjustment
Wireless Channel
Group Setting
Power Switch
Adapter Interface

ICONS

ICON INSTRUCTION

Wireless channel icon: Display the current channel number from 1 to 48.
Color temperature icon: Display the current color temperature with adjustable range from 2500K to 10000K.
Color temperature compensation icon: Display the color temperature compensation value ± 100%.
Intensity icon: Display the current intensity percentage that is dimmable from 0% to 100%.
RGBW color icon: Display the current value of the red, green, blue and white color that is adjustable from 0 to 255 each.
Group icon: Display the current group letter, and there are 6 groups from A to F in total.
Hue icon: Display the current hue value that is adjustable from 0° to 360°.
Saturation icon: Display the current saturation that is adjustable from 0% to 100%.
Effects icon: Display the name of the current effect, and there are 10 effects in total.

INSTALLATION

The installation and the removal of the metal barn doors

When installing the metal barn doors, align its four clips with the light slots simultaneously, then push the metal barn doors till its clips are tightened.
Press and hold the button on one side and pull out the metal barn doors on that side.
After pulling out, repeat the above actions on the other side to totally remove the metal barn doors.

USE

Power ON/OFF
a. Please rotate the locking cap at the end of power cable to connect with and remove the power adapter, and do not pull the power cable hard without unlocking the cap.b. Connect with the power adapter and long press the power button [ ], the LED light will turn on according to the relevant parameter values shown on the screen. Long press the power button again, the light and the screen will turn off.
Group Setting
Short press the [ ] button to set group, then short press the [ ] and [ ] button to switch group through A to F. And short press the [ ] button again to exit group setting.* Note
Set the same group of lights to the same channel when you need to control them simultaneously.
Wireless Channel
Short press the [ ] button to set channel, then short press the [ ] and [ ] button to switch channel through 1 to 48. Long press the [ ] and [ ] button to fast switch channels, and short press the [ ] button again to exit channel setting.
Fast Intensity Adjustment
Short press the [ ] button to fast adjust the intensity in 6 levels of 0%, 1%, 25%, 50%, 75%, 100%.
Working Mode Setting
Short press the [ ] or [ ] button to cycle through CCT mode, HSI mode, RGBW mode and EFFECTS mode.
CCT Mode
In CCT mode, short press the [ ] and [ ] button to set intensity and color temperature.
Short press the [ ] and [ ]button to adjust values, and long press the [ ] and [ ] button to fast adjust values.
HSI Mode
In HSI mode, short press the [ ] and [ ] button to set intensity, hue and saturation. Short press the [ ] and [ ] button to adjust values, and long press the [ ] and [ ]button to fast adjust values.
RGBW Mode
In RGBW mode, short press the [ ] and [ ] button to set intensity, red color, green color, blue color and white color. Short press the [ ] and [ ] button to adjust values, and long press the [ ] and [ ] button to fast adjust values.
EFFECTS Mode
In EFFECTS mode, short press the [ ] and [ ] button to choose effect. Short press the [ ] and [ ] button to adjust intensity, and long press the [ ] and [ ] button to fast adjust intensity.

No.	EFFECTS	Meaning
1	Lightning i	Lightningl
2	Lightning2	Lightning2
3	Cinema	Cinema Simulation
4	Police	Police Van Simulation
5	Ambulance	Ambulance Simulation
6	Fire truck	Fire Truck Simulation
7	Fast RG8	RGB Cycle at Fast Speed
8	Slow RGB	RGB Cycle at Low Speed
9	SOS	SOS
10	Candle light	Candlelight Simulation

Use the PIXEL LCS App
You can download the PIXEL LCS app from the iOS App Store, Google Play, etc, or scan the QR code below to get the app. Turn the app on and search to pair with the light via Bluetooth, and adjust parameters when successfully paired. Please visit https://www.pixelhk.com for more details of your Pixel lights.

SPECIFICATION

Name	Professional Video Light
Model	P80 RGB
CRI	Ra: ≥ 97
RGB Hue(HSI)	0~360°
Color Temperature	2500~10000K(M/G ± 100%)
Intensity Adjustment	0~100% and 0%, 1%, 25%, 50%, 75%, 100%
Lumen	4811LM
Lamp Beads Number	542pcs (190pcs of warm white light + 190 pcs of cold white

****Prolinx GmbH Brehmstr. 56, 40239
Duesseldorf Germany
Prolinx Global LTD 27 Old Gloucester
Street London, WC1N 3AX, UK
Add:
Building 2 No. 871, Dalang section Guanzhang Road, Dalang
Town, Dongguan, China
E-mail: pixel@pixelhk.com
Support: support@pixelhk.com
User: retail@pixelhk.com
http://weixin.qq.com/r/gkPWzpXEeMgHrdGt9xaQ https://www.pixelhk.com/cn X5399 22.01