IPCA Mini PC and TV Box User Manual

: June 12, 2024
: ipc

Table of Contents

Basic Operation
How to Change Your Audio Playback Devices on Windows
FCC Statement
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

User Manual

Thank you for your choice.
Please read the user manual carefully, and keep it for future reference.

Basic Operation

IPCA Mini PC and TV Box - Operation IPC-A Button &Ports

Power button
Headphone microphonejack
UsB port
CLRCMOS
DC in port
HDMI port
VGAport
LAN 1000M port

Faiureto usetheincluded pover adapter may volte regulatory compliance equirements and may ‘expose the user to safety hazards.

specifications are subject o the physical product,
Cautions
In order to continue to improve the user experience,we may occasionally update app and firmware.
- Do not use harsh of chemical solvent, cleaning productsWe recommend using a soft cloth to wipe.
- Do not throw product nto fire, avoid having fire accident.
- Do ot attempt to open the housing or to repair,if afailure occurs, please contact the customer service.
- Please note seepage while clean electronics, be careful of electric shock.
- Check for any frayed or damaged cords o plugs.
- Don’ tarbitrary discard the product, we should protect the environment.
- Operating environment: -10°C-45°C, 30%—85% humidity.
- Storage environment: -20°C—60°C, 10%—90% humidity.

How to Change Your Audio Playback Devices on Windows

Connect speakers, headphones, a webcam with a built-in microphone, a Bluetooth headset, or another audio devices to your Windows PC and you’ Il need to choose which devices Windows actually uses.

| 1. Just click the sound icon in your notification area(also known as the systemtray).
---|---
| 2.Click the“Select playback device”option.
| 3.Select the playback device youwant to use from the menu.

The following operations should be started with the power off SSD Card Installation. (As shown in the picture)

Align the notches on the SSD with the tabs in the M.2 slot on the mother board 2.5lide ssd in then secure the SSD with screw.

FCC Statement

This equipment has been tested and found to comply with the limits fora Class B digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmiul interference to radio communications. However, there is no guarantee that interference will not occurina particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:

Reorient o relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on acircuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operationis subject tothe following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment must be installed and operated in accordance with provided instructions and the antennals) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying R exposure.com
Power-on and Wake-on-LAN, setting guide file storage path (Select the corresponding file according to the machine model): C:\Power On and WOL system drive file storage path: C:\Driver

MADE IN CHINA