SYLVANIA SKCR2810BT PROSCAN Under Cabinet Clock Radio Owner’s Manual

SYLVANIA SKCR2810BT PROSCAN Under Cabinet Clock Radio

CAUTION: Electrically Operated Product–Please use care when plugging into the AC outlet.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

• The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN
• CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER (ON THE BACK), NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
• CAUTION: Use of controls or adjustments or performance other than those specified may result in hazardous radiation exposure.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
    Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14. This apparatus shall not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed on the apparatus.

15. The main plug is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus completely, the main plug should be disconnected from the main socket outlet completely.

16. The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

17. The marking information is located at the bottom of the apparatus.

18. The Caution Marking is located at the bottom of the apparatus.

19. The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING

• This is an alarm clock-not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.
• This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user-accessible parts.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF AC ADAPTOR TO WIDE SLOT. FULLY INSERT.

COMPLIANCE WITH FCC REGULATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

PROTECT YOUR FURNITURE!!

• This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.
• To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.

FUNCTIONS AND CONTROLS

OPERATING INSTRUCTIONS

PPOWER CONNECTION

This product operates on 120V~ 60Hz power supply. Plug the AC Adaptor into a household outlet AC source.

CONNECTING THE AC ADAPTER

1. Insert the DC plug of the AC adapter (included) into the DC Jack of the unit.
2. Fully insert the blades of the AC adapter (included) into the slots of a working wall socket as shown.
3. The LCD DISPLAY of the unit will show a flashing time of “12:00” prompting you that the time is not valid and needs to be adjusted to the right time as soon as possible.
4. After correctly setting up the time (as described in the next section), your unit is now in standby mode.

BATTERY BACKUP

This unit is equipped with a battery back-up system, requiring two DC 1.5V UM-4 type batteries (not included). Insert the battery in the BATTERY COMPARTMENT, making certain that the positive and negative (+ and -) sides are properly aligned. If power failure occurs, the clock automatically switches to the battery power supply, the clock continue running internally and the radio presets are preserved. When power returns, the unit switches back to AC adaptor again.

NOTE: The display will not exhibit time during power failure but the clock will keep correct time internally.

BATTERY CARE

• Use only the size and type of batteries specified.
• If the unit is not to be used for an extended period of time, remove the battery.
• Old or leaking batteries can cause damage to the unit and may void the warranty.
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery manufacturer’s directions).
• Do not dispose of batteries in fire, batteries may leak or explode.

SETTING THE DIGITAL CLOCK

1. In standby mode, press and hold the MEM / CLK button. The hour time digits will blink.
2. Press the TUN+ / SKIP+ or TUN- / SKIP- button to set the current hour. Press and hold the button for fast to setting. Press the MEM / CLK button again to confirm and the minute time digits will blink.
3. Press the TUN+ / SKIP+ or TUN- / SKIP- button to set the current minute. Press and hold the button for fast to setting.
4. Press the MEM / CLK button again and confirm the current time is set.

NOTE: The PM icon will light when the hour is set in the PM

SETTING TIMER

In any mode, press the TIMER button, the TIMER icon with time “180” will displayed and flash.

1. Press the TIMER button again, the timer time will count down 10 minute. Repeat to press this button to adjust the timer in decrements of 10 minute.
2. Press the TUN+ / SKIP+ or TUN- / SKIP- to adjust the timer in increments/ decrements of 1 minute when flash of time digits.
3. After the set time is reached, the SKCR2810BT alarm will sound.
4. To cancel the alarm after it has sounded, press the button.

BLUETOOTH OPERATION

ABOUT PAIRING

Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time. This allows the devices to see each other and sets up a one to one communication channel between both devices.

To begin pairing with a Bluetooth device

1. Press the button to turn on the unit.
2. Press the SOURCE button to select Bluetooth function and the icon will displayed and flash on LCD, you will hear the melody and start pairing process to connect to your Bluetooth device.
3. Turn on Bluetooth function of your device and enable the search or scan function to find SKCR2810BT (see your device’s instructions to add or setup a Bluetooth device).
4. Select SKCR2810BT from the device list when it appears on you device screen. If required, enter the pass code “0000” to pair (link) SKCR2810BT with your device.
5. Once paired with a device, the icon will light steadily and your will hear the sound “DOM” to confirm that pairing is tone beep sound confirms that pairing is completed.
6. If you want SKCR2810BT change to pair with another Bluetooth device. Press and hold the / M+/PAIR button for about 4~5 seconds. The icon will flash, the melody will be heard to confirm the unit will go into Pairing/Discoverable mode again. Repeat steps 3 and 4.

To connect previously paired Bluetooth device

SKCR2810BT can store one previously paired device for quick pairing during power on. When the unit is powered on and the previously paired device is found within the operating range, the unit will pair the device automatically.

NOTE:

• Due to different operating system of Bluetooth devices, the time taken by pairing process might be different. If the pairing cannot be successful in the first time, please try to restart the pairing process by pressing and holding the / M+/PAIR button again until the icon flash.
• The pairing time might be longer for the first time pairing or pairing a new Bluetooth device.
• Make sure you have the latest firmware for your Bluetooth devices.
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking.
• Refer to manual of your cell phones, tablet PC, computer or other Bluetooth enabled device for Bluetooth operation since it may vary from model to model.

PLAYING FROM A BLUETOOTH DEVICE

You can play music from your Bluetooth device wirelessly to SKCR2810BT after pairing.

1. Selecting your favorite song, press the PLAY button on your Bluetooth device or the / M+/PAIR button on SKCR2810BT to play or pause the Bluetooth device playback.
2. Adjust both the VOLUME +/- buttons of your SKCR2810BT and your Bluetooth device until you reach a comfortable listening level.

Notes:

1. Your Bluetooth enabled device will not play the music through the speaker, even if connected (linked), if the device does not support A2DP profile.
2. Remember to turn off the SKCR2810BT when you have finished listening, set the button to the STANDBY mode.
3. Don’t forget to switch off the power of your external audio device as well

LISTENING TO THE RADIO

1. Press the button to turn the unit ON.
2. Press the SOURCE button to select FM band, the FM frequency will show on LCD display.
3. Use the TUNE+ / SKIP+ or TUNE– / SKIP– button to select the desired radio station. If you press and hold the TUNE+ / SKIP+ or TUNE– / SKIP– button for 2 seconds, then release, the unit will automatically scan to the next broadcasting station.
4. The broadcasting radio frequency will be displayed for about 10 seconds before reverting to the clock time.
5. Press the button to turn the radio OFF.

TO SET/RECALL RADIO STATION PRESETS

1. Press the button to turn the unit ON.
2. Press the SOURCE button to select FM band, the FM frequency will show on the LCD display.
3. Use the TUNE+ / SKIP+ or TUNE– / SKIP– button to select the desired radio station.
4. Press the MEM / CLK button to enable the program function and the preset channel number “P01” indicator will show on the LCD display and flashing.
5. Press the TUNE+ / SKIP+ or TUNE– / SKIP– button to enter the desired channel number of program.
6. Press the MEM / CLK button to confirm memory.
7. Repeat above steps #3 thru #6 to preset up to 20 stations for FM band.
8. To retrieve one of the preset stations already programmed, press / M+/PAIR button until you reach the desired preset number/radio station.

LINE IN OPERATION

This unit provides an auxiliary audio signal input jack for connecting external audio devices like MP3 players, CD players and listen to them through the speakers of this unit.

1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
2. Plug one end into the LINE IN Jack on the main unit and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the unit and external audio device.
4. To select auxiliary audio input, tap the SOURCE button to select LINE IN mode. “LINE IN” icon appears on display.
5. The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual.

NOTE: If you connect this unit to the Line-Out Jack of your external device then you only need to adjust the volume control of this unit. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this unit to find the most desirable volume setting.

RESETTING YOUR CLOCK RADIO

If the system does not respond or exhibits erratic or intermittent operation, you may have experienced an electrostatic discharge (ESD) or a power surge that triggered the internal microcontroller to shut down automatically. If this occurs, simply disconnect the AC Adaptor and remove the system back-up battery, wait for at least 3 minutes and then setup the unit again as if you were using it for the very first time.

CHARGING YOUR PORTABLE DEVICE

This unit features a USB port for charging your portable device (iPod, iPhone, Android phone, etc.) when used with the USB charging cord that came with your device.

1. Plug one end of the USB cable (not included) into the USB Charging Port located on the front of the unit. Plug the other end of the cord into the device you wish to charge.
2. Observe the battery charge indicator on your device and the charging will start immediately.
3. Unplug the cable when your device is charged.

CAUTION: Before charging, please refer to the user manual of the device you wish to charge to make sure the charging current requested does not exceed 2.1A of charging current. Overloading the charge circuit may damage the unit and void the warranty.

1. The USB charging port of this unit supplies a DC 5V output at 2.1A maximum current to charge your portable device battery and it cannot support any other voltage range.
2. Make sure the device you want to charge has a battery charge rating of DC 5V only.
3. The USB port of this unit is designed for portable device battery charging only and it cannot support data transfer or connect to computer.

Do not connect the USB port of this unit to other external power charger USB ports, it may damage both units and void the warranty.

CARE AND MAINTENANCE

1. Clean the unit with a soft, damp (never wet) cloth. Solvent or detergent should never be used.
2. Avoid operating your unit under direct sunlight or in hot, humid or dusty places to reduce the risk of fire or electric shock.
3. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.
4. For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong room illumination.
5. Unplug the unit from the electrical power outlet immediately in case of malfunction.

SPECIFICATIONS

• Power Adaptor:
  • AC input 120V~ 60Hz
  • DC Output 5V 2.5A
• Battery Back-up: 2 x DC 1.5V UM-4 type batteries (not included)
• Bluetooth: Bluetooth Specification version 3.0 Support profile A2DP
• Frequency Range: FM 87.5 – 108 MHz
• Audio Power output: 1.5W (RMS) x2
• USB Charging: DC 5V 2.1A
• Dimensions: 6.8 cm (H) x 23.2 cm (W) x 17.0 cm (D)
• Weight: 670 g.

LIMITED PRODUCT WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.com before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the questions you could have in operating the unit.

TERMS OF WARRANTY

C.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 90 days on parts and 90 days on labor. If you originally purchased your product more than 90 days ago, a repair fee may apply. Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any items placed in this product, whether due to any defect of the product, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by C.I. or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify and save harmless C.I. from any claim for damages to persons or property caused by the unit.

TO OBTAIN REPAIRS UNDER THE TERMS OF THIS WARRANTY

1. The original purchaser must present a copy of the original bill of sale and the service warranty card.
2. Any alterations, abuse, misuse, battery corrosion or accidental damage voids the warranty.
3. The warranty does not cover cabinets and accessories.
4. No warranty or insurance contained or set out shall apply when damage or repair is caused by power failure; damage in transit or when moving the unit; improper power supply; use for commercial or industrial purposes; service calls resulting in customer education, etc.
5. The defective product should be mailed to:

• Canada C.I. Service Dept. 315 Attwell Drive Toronto, ON M9W 5C1
• U.S.A Curtis International Ltd c/o Liquidity Services/Liquidation.com 1399 Perry Road Plainfield, IN 46168

For service assistance and product information, please call: 1-800-968-9853.

If mailing the product, the freight must be prepaid and a money order for $7.00 should be included to cover the cost of insurance and the return of the product.

• C.I. reserves the right to repair or replace the parts which have become defective. SYLVA/IA is a registered trademark of OSRAM SYLVANIS Inc. used under licence.

FREQUENTLY ASKED QUESTIONS

What is the SYLVANIA SKCR2810BT PROSCAN Under Cabinet Clock Radio?

The SYLVANIA SKCR2810BT is an under cabinet clock radio that features AM/FM radio reception, Bluetooth connectivity, and a built-in CD player.

What are the key features of the SKCR2810BT Under Cabinet Clock Radio?

The key features of the SKCR2810BT include AM/FM radio, Bluetooth wireless streaming, a CD player, and a digital clock display.

How is the SKCR2810BT designed to be used under a cabinet?

The SKCR2810BT has mounting hardware that allows it to be installed under a cabinet in spaces like kitchens, providing a space-saving audio solution.

What kind of audio sources can be played through the SKCR2810BT?

The SKCR2810BT supports playing audio from AM/FM radio broadcasts, CDs, and Bluetooth-enabled devices.

Does the SKCR2810BT have a built-in speaker?

Yes, the SKCR2810BT comes with built-in stereo speakers for audio playback.

Can the SKCR2810BT connect to smartphones and other Bluetooth devices?

Yes, the SKCR2810BT features Bluetooth connectivity, allowing you to wirelessly stream audio from compatible devices.

Is there a remote control included with the SKCR2810BT?

Yes, the SKCR2810BT often comes with a remote control for convenient operation from a distance.

How is the digital clock display of the SKCR2810BT powered?

The digital clock display is powered through the device's electrical connection.

Can the SKCR2810BT be used as an alarm clock?

The SKCR2810BT often includes alarm clock functionality, allowing you to wake up to your preferred audio source.

Is there a sleep timer feature on the SKCR2810BT?

Yes, some versions of the SKCR2810BT may have a sleep timer function that allows you to set a timer for the radio or audio playback to turn off after a certain period.

Does the SKCR2810BT have a headphone jack for private listening?

The SKCR2810BT may not have a headphone jack, as it's designed more for communal audio playback.

Can you listen to CDs while the SKCR2810BT is mounted under a cabinet?

Yes, the SKCR2810BT's CD player can be accessed even when the unit is mounted under a cabinet.

Does the SKCR2810BT have preset stations for the radio?

Yes, the SKCR2810BT often includes preset stations for both AM and FM radio frequencies.

Can the SKCR2810BT be powered by batteries or does it require an outlet?

The SKCR2810BT is typically powered by an electrical outlet. It may not have a battery-powered option.

DOWNLOAD THE PDF LINK:SYLVANIA SKCR2810BT PROSCAN Under Cabinet Clock Radio Owner’s Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>