SALTER EK5557 3kW Kettle Instruction Manual
- June 12, 2024
- SALTER
Table of Contents
SALTER EK5557 3kW Kettle
PRODUCT INFORMATION
SALTER SINCE 1760 3 kW Kettle
Safety Instructions
- When using electrical appliances, basic safety precautions should always be followed.
- Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the main power supply. Children aged from 8 years and people with reduced physical, sensory, or mental capabilities or lack of experience and knowledge can use this appliance, only if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance.
- This appliance is not a toy – children should be supervised to ensure that they do not play with the appliance.
- Keep the appliance and its power supply cord out of the reach of children.
- If the power supply cord, plug or any part of the appliance is malfunctioning or if it has been dropped or damaged, cease using the product immediately to avoid potential injury.
- This appliance contains no user-serviceable parts, only a qualified electrician should carry out repairs. Improper repairs may place the user at risk of harm
- Keep the appliance and its power supply cord away from heat or sharp edges that could cause damage. Do not immerse the electrical components of this appliance in water or any other liquid.
- Do not operate the appliance with wet hands, or if any connections are wet.
- Do not leave the appliance unattended whilst connected to the mains power supply.
- Do not remove the appliance from the mains power supply by pulling the cord; switch it off and remove the plug by hand.
- Do not pull or carry the appliance by its power supply cord.
- Do not use the appliance for anything other than its intended use.
- Do not use any power supply base unit other than the one provided with this appliance.
- Do not store the appliance in direct sunlight or high humidity conditions.
- Do not move the appliance when it is in use.
- Do not fill the appliance above its max. fill mark. Overfilling the appliance may cause boiling water to be ejected.
- Always unplug the appliance after use and allow it to cool fully before any cleaning, user maintenance, or when storing it away.
- Always use the appliance on a stable, heat-resistant surface, at a height that is comfortable for the user
- The use of an extension cord with the appliance is not recommended.
- This appliance should not be operated by means of an external timer or a separate remote control system. This appliance is intended for domestic use only. It should not be used for commercial purposes.
- Exercise caution when using this appliance, as steam will be emitted from the spout and/or lid, especially whilst refilling.
CAUTION: Hot surface – do not touch hot sections or heating components of the appliance. The heating element surface is subject to residual heat after use. Always allow the appliance to cool thoroughly before touching or opening the lid.
WARNING: Boiling water and steam can cause serious injury; exercise extreme caution when using this appliance. Do not open the lid while the appliance is boiling. Misuse of the appliance could cause injury to the user.
Boil-dry Sensor
The kettle is equipped with a boil-dry sensor. If the kettle is accidentally turned on whilst empty, the boil-dry sensor will activate causing the power to switch off. The kettle will then remain inactive and the power switch will not function for several minutes until the kettle is cool. Do not try to use the kettle during this time; once it has cooled down, it will resume its normal function.
Care and Maintenance
- Wipe the kettle and power base with a soft, damp cloth then allow it to dry thoroughly.
- Do not immerse the kettle water or any other liquid.
- Never use harsh or abrasive cleaning detergents or scourers to clean the kettle as this could cause damage.
Removing the ‘New Kettle’ Taste
Fill the kettle to the max. fill mark and boil the water, following the instructions in the section entitled ‘Using the Kettle’. If any slight ‘new kettle’ taste or odor remains in the boiled water, discard this and refill the kettle to three-quarters full. Once boiled, add two tablespoons of bicarbonate of soda and leave to stand overnight. Discard the water then re-boil a couple of times to remove any residue.
Removing Limescale
Limescale can develop over time and may affect the performance and lifespan of the kettle. It is recommended to descale the kettle regularly, at least once every three months, especially if the kettle is used in a hard water area. Frequent descaling will improve the performance and lifespan of the kettle.
- STEP 1: Fill the kettle to the max. fill the mark with cold water.
- STEP 2: Add a commercial descaling agent to the kettle, adhering to the manufacturer’s instructions. It is not recommended to use vinegar to descale the kettle.
- STEP 3: Allow the kettle to boil, switch it off and leave to soak for at least 20 minutes or for the length of time specified on the descaling product.
- STEP 4: Empty the kettle and refill to the max. fill the mark with clean water. Boil the kettle once more and pour the water away after it has cooled. The kettle should now be descaled. If the kettle switches off before it has boiled or a white deposit is noticed on the inside of the kettle, it needs to be descaled. Add a commercial descaling agent to the kettle, adhering to the manufacturer’s instructions. It is not recommended to use vinegar to descale the kettle.
Description of Parts
- 3 kW Kettle
- Power base
- Power switch
- Handle
- Min. fill mark (0.5 L)
- Max. fill mark (l . 7 L)
- Water fill gauge
- Pull top lid
- Lid Handle
- Spout
- Limescale Filter
Instructions for Use
Before First Use
Before using the kettle for the first time, wipe it clean with a soft, damp
cloth and dry it thoroughly. Check that the limescale filter is attached.
NOTE: When using the kettle for the first time, a slight odor may be emitted. This is normal and will soon subside. Allow for sufficient ventilation around the kettle.
WARNING: The kettle is not suitable for dishwasher use
Using the 3 kW Kettle
- STEP l: Remove the kettle from the power base.
- STEP 2: Remove the lid and fill the kettle to desired water level between the min. fill mark and the max. fill mark. Replace the pull-top lid until it clicks securely shut and place the kettle back onto the power base.
- STEP 3 : Plug in and switch on the kettle at the mains power supply and flip the power switch to the ‘on’ position until it clicks; it will illuminate to indicate that it is switched on. Do not touch the body of the kettle during use.
- STEP 4 : Once the kettle has boiled, the power switch will automatically flip back into the off position.
NOTE : The boiling process can be canceled at any time by flicking the power switch back into the off position.
CAUTION : Allow the kettle to cool thoroughly before touching the body or opening the lid.
Storage
The kettle must be cool, clean, and dry before storing it in a cool, dry
place. Never wrap the cord tightly around the kettle; wrap it loosely to avoid
causing damage.
Specifications
- Product code: EK5557
- Input: 220-240 V – 50-60 Hz
- Output : 2550-3000 W
Connection To The Mains
Please check that the voltage indicated on the product corresponds with your supply voltage.
Important
As the colors in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, please proceed as follows:
The wires in the mains lead are colored by the following code:
- Blue Neutral (N) Brown Live (L)
- Green/Yellow Earth
FOR UK USE ONLY – Plug fitting details (where applicable).
- The wire colored BLUE is the NEUTRAL and must be connected to the terminal marked N or colored BLACK.
- The wire colored BROWN is the LIVE wire and must be connected to the terminal marked Lor colored RED.
- The wire colored GREEN/YELLOW must be connected to the terminal marked with the letter E or marked
- On no account must either the BROWN or the BLUE wire be connected to the EARTH terminal .
- Always ensure that the cord grip is fastened correctly.
- The plug must be fitted with a fuse of the same rating already fitted and conforming to BS 1362 and be ASTA approved.
- If in doubt, consult a qualified electrician who will be pleased to do this for you.
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable plug fitted to the mains
lead and should the fuse need replacing, you must use an ASTA-approved one
(conforming to BS 1362 of the same rating).
If in doubt, consult a qualified electrician who will be pleased to do this
for you. If you need to remove the plug, DISCONNECT IT FROM THE MAINS, then
cut off the mains lead and immediately dispose of it safely. Never attempt to
reuse the plug or insert it into a socket outlet as there is a danger of an
electric shock.
UP Global Sourcing UK Ltd.,
Victoria Street, Manchester OL9 ODD. The UK. Edmund-Rumpler StraBe 5, 51149 Koln. Germany.
If this product does not reach you in an acceptable condition please contact our Customer Services Department at www.salter.com
Please have your delivery note to hand as details from it will be required.
If you wish to return this product, please return it to the retailer from where it was purchased with your receipt (subject to their terms and conditions).
Guarantee
All products purchased as new carry a manufa c turer ‘ s guarantee; the time period of the guarantee will vary dependent upon the product. Where reasonable proof of purchase can be prov ided, Salter will provide a standard 12 month guarantee with the retailer from the date of purc ha se. Th is is only applicable when products have been used as instructed for their intend ed, domestic use. Any misu se or dismantling of products will invalidate any guarantee. Under the gu arantee , we undertake to repair or replace free of any charge any parts found to be defective. In the event that we cannot provide an exact replacement, a similar product will be offered or the cost refunded. Any damages from daily wear and tear are not covered by this gu arantee , nor are consumables such as plugs, fuses etc. Please note that the above terms and conditions may be updated from time to time and we therefore recommend that you check these each time you revisit the web site. Nothing in this guarantee or in the instructions relating to this product excludes, restricts or othe rwi se affects your statutory rights.
Disposal of Waste Batteries and Electrical and Electronic Equipment
This symbol on the product, its batteries or its packaging means that this product and any batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate col[ection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. Some retailers provide take-back services which allow the user to return exhausted equipment for appropriate disposal. It is the user’s responsibility to delete any data on electrical and electronic equipment prior to disposal. For more information about where to drop batteries, electrical and electronic waste off, please contact the local city/municipality office, household waste disposal service, or the retailer
To be eligible for the extended guara nte e, go to guarantee.upgs.com/salter and register your product within 30 days of purchase. Find us on 11
Manufactured by: UP Global Sourcing UK Ltd., Victoria Street, Manchester OL9 ODD. UK. Edmund-Rumpler StraBe 5, 51149 K6In. Germany.
Made in China
©Salter trademark. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>