Elestyle CP-6088 Food Chopper User Manual

Elestyle CP-6088 Food Chopper

Product Information

small amounts of food. It is designed for domestic household use
only.
Technical Data|

• Main voltage: 220-240 V ~ (AC), 50/60Hz
• Rated Power: 500W
• Protection class: II (Double insulation)
• Bowl Capacity: 1200 ml
• Max. capacity: Food products / Liquids up to Max marking
• All parts of this appliance that come into contact with food
  are food-safe

Product Usage Instructions
Safety Information

1. Before using the unit, read the instructions carefully.
2. Connect the appliance only to the correctly installed mains power sockets that supply a current rating of 220-240V~, at 50/60Hz.

Preparation for Usage
Thoroughly clean all component parts as described in the section “Cleaning and Maintenance” before using the appliance.

Operation
Follow the table below for recommended processing times and speeds:

Medium: 1 x 10 sec.
Fine: 3 x 10 sec.| Level II
Meat (Cubed 2 x 2 cm)| 250 g| 6 x 5 sec.| Level II
Ice cubes| 100 g| Coarse: 10 x 1 sec.
Fine: 20 x 1 sec.| Level II

Note: Prepare the food by chopping larger pieces into small ones (approx 2 cm) which will fit better into the bowl. The times and quantities listed in this table are guide values and can vary depending on the composition of the processed food.

Please read the above illustrations and familiarise yourself with all functions of the device.

Intended use
This appliance is intended for the chopping of foods in small amounts. This appliance is intended exclusively for use in domestic households. All other uses are deemed to be improper and may result in property damage or even in personal injury. No liability will be accepted for damages that result from improper use of the appliance

Description

1. Speed Button-Level II
2. Speed Button-Level I
3. Motor unit
4. Bowl lid
5. Blade Holder with Blades
6. Bowl
7. Non-slip Stand

Technical data

Safety Information
Before using the unit read these instructions carefully. Connect the appliance only to correctly installed mains power sockets that supply a current rating of 220-240V~, at 50/60Hz. To avoid potential risks, if the appliance power cable is damaged, it must be replaced by the manufacturer, its customer service, or by a qualified technician.

• In the event of operating malfunctions and before cleaning the appliance, remove the power plug from the mains power socket.
• Always remove the power cable from the socket by pulling on the plug, not on the power cable itself.
• Do not kink or crush the power cable, and route the cable so that it cannot be stepped on or tripped over.
• Do not expose the appliance to humidity and do not use it outdoors. If any liquid gets into the housing, disconnect the appliance from the mains power socket immediately, and have it repaired by a qualified technician.
• If the power cable or the motor unit is damaged, you must have the appliance repaired by qualified technicians before using it again. Do not attempt to open the motor unit housing.
• Never immerse the motor unit in liquid and do not allow any liquids to enter the motor unit housing.
• Before replacing any accessories or additional parts that move during operation, the appliance must be switched off and disconnected from mains power.
• The blades is extremely sharp! Take care when emptying the bowl! Take care when cleaning the appliance!
• The appliance must always be disconnected from the mains power socket when left unsupervised and before assembly, disassembly or cleaning.
• This appliance and its connecting cable must be kept away from children
• Do not allow children to use the appliance as a plaything.
• This appliance may be used by persons with limited physical, sensory, or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the appliance safely and are aware of the potential risks.
• Handle the extremely sharp blade with caution as it can cause injuries. Keep the blade out of the reach of children.
• Never attempt to remove foodstuffs from the bowl as long as the blade is still rotating.
• Wait until the blade has stopped rotating before removing the motor unit.
• Never try to grasp the blade if it is still rotating.
• Do not allow the appliance to run for more than 2 minutes. Afterward, allow it to cool down.
• Do not use the appliance to process boiling or hot food.
• Do not clean the motor unit in the dishwasher, as it will damage it.

Preparation for usage

Thoroughly clean all component parts as described in the section Cleaning and Maintenance before using the appliance.

Operation

1. Place the Bowl ⑥ on the Non-slip Stand ⑦
2. Insert Blade Holder with Cutting blades ⑤ on the bearing
3. Add the food to the Bowl ⑥
4. Place the Lid ④ on the Bowl, so that the sealing ring rests on the edge of the Bowl
5. Place the Motor Unit ③ onto the Lid
6. Insert the plug into a mains power socket.
7. Press the required speed button ① / ②. The blade rotates as long as you keep the speed button pressed. The motor stops as soon as it is released.
8. If the food is fully chopped, release the speed button ① / ②.
9. Remove the power plug from the socket
10. Wait until the blade has come to a complete standstill.
11. Lift the Motor Unit off the Lid. Remove the Blade carefully from the Bowl
12. Remove the food

Prepare the food by chopping larger pieces into small ones (approx 2 cm) which will fit better into the bowl. The times and quantities listed in this table are guide values and can vary depending on the composition of the processed food!

NOTE
If food is too much or too hard, the strong centrifugal force might throw some food to stick on the wall of the bowl. It is normal that the blades become difficult to hit that food. In order to achieve better chopping results, please stop the machine and then shake the glass bowl or scrape the inside with a spoon to even out the food before restarting.

Cleaning and maintenance

We recommend cleaning the unit immediately after usage.

• Unplug the motor unit before cleaning.
• Wipe the motor unit with a damp cloth.
• Never immerse the motor unit in water or any other liquids.
• Never use abrasive agents or scouring pads for cleaning.
• After using the chopper wash the bowl and the lids in warm, soapy water, rinse.
• Allow drying completely before reassembling.
• Caution! The blade is very sharp!
• To avoid injuries, rinse the blade in the water, always keeping the blade in sight.

NOTE
Alternatively, you can clean the Bowl, Blade Holder with Cutting Blades, Bowl Lid with seal ring, and Non-slip Stand in the dishwasher. If possible, place the parts in the top basket of the dishwasher. Ensure that the parts are
not trapped in any way

Disposal of the appliance
Never dispose of the appliance in your normal domestic waste. This product is subject to the provisions of the European Directive 2012/19/EU. Dispose of the appliance through an approved disposal facility or your municipal waste facility. Please comply with all applicable regulations. Please contact your waste disposal center if you are in any doubt. Your local community or municipal authorities can provide information on how to dispose of the worn- out product. The product is recyclable, subject to extended producer responsibility, and is collected separately

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>