FOL FS-R206 Portable Wireless Speaker System Instruction Manual
- June 1, 2024
- FOL
Table of Contents
FOL FS-R206 Portable Wireless Speaker System
Specifications
- Speaker Size: 4×2 + 0.5×2
- Frequency Response: 40Hz – 20KHz
- S/N Ratio: 78dB
- Output Power: 30Wx2
- Power: 100-240V 50/60Hz
- Battery Capacity: 14.8V 3000mAh
Bluetooth Connectivity
- Turn on the power switch to automatically enter the Bluetooth mode.
- Switch on the Wireless Bluetooth connection function of your mobile phone and search for available devices. When the speaker appears as CNONXXL, click to connect directly. If prompted for a password, enter 0000 to pair.
- Upon successful pairing, the speaker will emit a voice prompt indicating successful connection.
- You can now play music from your mobile phone and enjoy it through the speaker.
FAQ
-
Q: How do I charge the speaker?
A: To charge the speaker, use the provided power cord and connect it to a power source with an input of 100-240V. -
Q: How can I switch between different modes of the speaker?
A: To switch between modes, use the designated buttons on the playback panel to navigate through Bluetooth, USB, SD, FM, and Line modes. -
Q: What should I do if I encounter connectivity issues with Bluetooth?
A: Ensure that the speaker is in Bluetooth mode and that your mobile phone’s Bluetooth function is turned on. Try reconnecting by following the pairing instructions provided in the manual.
DESCRIPTION OF PLAYBACK PANEL
USE OF EACH KEY
- 1. “-“: Briefly press the previous song. In FM mode, press this button briefly to point to the previous channel; Pressing them within a few seconds decreases the volume.
- 2. “+”: Short press the next song, and in FM mode, use this button to short press the next channel; Press it for a few seconds and they will turn up the volume.
- 3. ” “: Press in a few seconds to open or close.
- 4. “ “: Short press to start pairing TWS, press for a few seconds to disconnect TWS, and long press to disconnect Bluetooth.
- 5. M: Press this button to directly enter the Bluetooth mode, then press to enter the USB-SD-FM-Line mode, and then press to return to the Bluetooth mode. In any mode, inserting a USB flash drive will be a priority. If the USB flash drive and TF card are inserted at the same time, they will be inserted later and play first.
- 6. : Short press Continue/Stop. In FM mode, short press Mute. Long press will automatically search the channel. In the process of channel search, short press will stop the search.
- 7. Battery indicator
- 8. USB: usb input.
- 10. TF: TF card input
- 11. Power input 100-240V
Bluetooth connectivity
- Turn on the power switch to automatically enter the bluetooth mode.
- Switch on the Wireless Bluetooth connection function of Mobile phone and searching, while the Mobile phone shows “CNON- XXL”,click the connect directly. Mobile phone connection do not need password,if need password, please input “0000” to go on pariring. After successfully pairing, the speaker will send out a voice of prompt. it is success pairing between mobile phone and wireless Bluetooth connection speaker.
- Play the music of your mobile phone directly and will give out beautiful voice from speaker.
SPECIFICATIONS
- Speaker Size: 4″x2+0.5″x2
- Frequency Response: 40Hz – 20KHz
- S/N Ratio:≥78dB
- Output Power: 30Wx2
- Power: 100-240V 50/60Hz
- Battery Capacity:14.8V 3000mAh
Attachment
- Audio cable 1 pc
- Power cord 1 pc
- Instruction manual 1 pc
- Warranty Card 2 pcs
Important Safety
The lightning fash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-isolated, dangerous voltage
within the inside of the device that may be of sufficient magnitude to
constitute a risk of electric shock to persons. Warning: To reduce the risk of
electric shock, do not remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to qualified personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping
or splashing and that objects filled with liquids, such as vases, shall not be
placed on apparatus.
- Where the mains plug/appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING: The battery (battery or batteries or battery pack) shall not be
exposed to excessive heat such as sunshine, fire or the like. Read these
instructions before operation. Keep these instructions for future reference.
Follow all instructions for installation, use and maintenance of the device.
To clean the device, disconnect power first. Clean only with soft and dry
cloth. To ensure compatibility, only use accessories recommended by the
manufacturer. When the device is suddenly moved from cold to warm
surroundings, condensation may form in the housing of the device. Before use,
leave the device in the warm environment until the moisture evaporates. Keep
the device away from heat sources, such asa radiator, heater, oven, amplifier,
naked flames or direct sunlight. No naked fame sources, such as lighted
candles, should be placed on the apparatus. Never block any ventilation
openings. Install in accordance with the manufacturer’s instructions. Do not
expose the device to sand or dust, or cover it with items, such as newspapers,
tablecloths, or curtains. Do not operate the device in an enclosed cabinet.
Leave sufficient free space around the device for adequate ventilation.Do not
attempt to repair or service the device yourself. Opening or removing the
cabinet may expose you to electric shock, and other hazards. lf repair is
required, contact your dealer and refer all servicing to qualified service
personnel. Do not use the device if any abnormality occurs. lf any smoke or
odor becomes apparent, contact your dealer immediately. Do not try to repair
the device yourself. Avoid using dropped or damaged appliances. lf the device
is dropped and the housing is damaged, the internal components may not
function normally. Stop use and contact your dealer for repair. Continued use
of the device may cause fire or electric shock. To reduce the risk of electric
shock, do not touch any connector with wet hands. Never remove the housing of
the device. Never lubricate any part of the device. Never place the device on
top of any other electrical equipment.
This equipment is a Class ll or double-insulated electrical appliance. It has
been designed in such away that it does not require a safety connection to
electrical earth.
Notice Modification
Any modification (such as removing the speaker grill)to the device, without
prior authorization from the manufacturer, may void your warranty and
authority to operate the device.
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device must not be co-located or operating in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>