SHARP 32EE2KD 32 HD Ready Smart Tv Dvd User Guide

Quick Start Set Up Guide
For information on using the TV’s features, please refer to the Operating Instructions.
Model Numbers 32EE2K 32EE2KD 32EE3K 32EE4K 32EESK 32EE6K 32EE7K

32EE2KD 32 HD Ready Smart Tv Dvd

Register your manufacturers guarantee online within 14 days of purchase at www.registertoday.co.uk/sharp and enter into a prize draw to
Win a SHARP Soundbar
Quick & easy guide for setting up your TV What is included in the box Using the remote control Setting up the TV for the first time – including attaching the stand Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helplinex Telephone UK 0330 024 0803 or ROI 01443 3323 Online support at: www.umc-uk.co.uk
Email support at: service@umc-uk.co.uk
‘Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider.
Calls to the ROI number are charged at the local call rate. The telephone opening hours are:
Monday to Friday: 8.30am – 6pm Saturday: 9am – 5pm Bank Holidays: 10am – 4pm
Closed Christmas and NewYears day.

SHA/QSW/0260

REMOT CONTROL

Sky Remote Code
If you wish to use your Sky remote to operate the TV’s basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134.1f you wish to use your Sky Q remote to operate the TV’s basic functions, you will need to program it with the code 4170.

Online Manual
To launch the Online Manual, press the (MENU) button and then select Sittings

Setup > Iltip Information
What is included in the box

Accessories

Included with this TV are the following accessories
1 x Quick Start Guide 1 x Safety Leaflet
1 x Remote Control and 2 x AAA Batteries I x Stand installation pack
Additional Accessories
If you don’t have the RE cable shown below, then you can purchase one from www.umc-uk.co.ukkables If you are Intending to connect your TV to an RF socket in order to receive Freeview you will need this cable.

Microsoft PlayReady
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. Content owners use Microsoft PlayReadyw content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMORM- protected content. If the device fails to property enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.
FfreevievePo,,
Freeview Play brings together live TV viewing with “catch up* TV services Bud. as BBC ‘Player, ITV player, More/ and Demand 5. The Freeview Play Explore app features a carousel of genres to soled from when searching for programmes, such as sport. comedy, dramas end soaps, etc. Content is mode up from recommendations of the major broadcasters and offers an alternative means of searching.
Note that to use the full functionality of Deeview Play your set must be connected to the miemel
Please save your box/packaging as you will need this In the event of warranty/service repair or support. We are unable to carry out warranty/Service if you are unable to package it correctly. The safest way to package your item in the event of warranty/service repair is in it’s original box/packaging.

Setting up the TV set for the first time Fitting the stand

TV panel must be facing downwards. For the stand installation, there is one type of screw provided as shown below.
Note: To complete the stand installation you will require a cross head screw driver. Used for attaching the stand to the TV set (fig 2) Place the TV set on a flat and clean surface with the panel facing downwards to avoid damage. U When the stand feet are installed correctly the stand feet will be longest at the front of the TV and shortest at the back with the feet pointing away from each otherWhen the stand/feet are in the correct position, secure the feet to the underside of the TV set using 4 screws provided.

Win a SHARP Sound bar

Register your manufacturers guarantee online within 14 days of purchase at www.regIstertoday.c0.uldsharp and enter into a prize draw to win a Sharp Soundbar Chlorbevstorycoot),.
Wall Mounting the TV

image to’ illusnation only for the dimenuom of the VISA moulting. please refer to the Technical Specifications section of thn document.
El Remove the four screws that are supplied in the wall mounting holes. B The wall mount can now be easily attached to the mounting holes on the rear of the TV. 13 Install the wall mounting bracket to the television as advised by the bracket manufacturer.
The picture shows the use of spacers, which are not applicable to all sets/installations.
Connectivity

Connecting your set

1. Connect the TV to your power socket. El If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial.
2. If you do not wish to receive Freeview/ Saorview, skip this step.

Powering On the TV

Switch on the television by pressing the TV control stick located on the TV set. Insert the batteries supplied into the remote control and press the standby button to power on the N.

First yime installation

Connectivity

by service centres
0 CI Card In| Common Interface Module
0 TF Card In| Micro SD Card Input
a USB 2.0| USB 2.0 input x2
| 2EE2K 32EE3K 32EE4K 32EESK 32EE6K 32EE7K| 32EE2KD
---|---|---
/Energy Efficiency Class (SDR)| E
Power consumption (SDR)| 25 W
Screen resolution (pixels)| 1366 x 768
Screen Size (diagonal)| 81 cm / 32 inches
RF| 75 ohm Antenna / Analog / DVB / Satellite
Inputs| 3 x HDMI • 2 x USB • 1 x Micro SD card slot
1 x RJ45 LAN/Ethernet • 1 x Composite/CVBS Video & Component/YPbPr Input
1 x UR Audio input for Composite/CVBS & Component/YPbPr
Sound Outputs| 1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker•/ Amplifier Watts (RMS)| 2 x 10 / 2x 8
Voltage and power consumption| AC 220V — 240V; 50Hz 25/40/65W
(home mode/standard/max) (<0.5W in Standby) 25/40/75W| AC 220V — 240V; 50Hz (home mode/standard/max) (<0.5W in Standby)
Dimensions including stand (mm)| 730W x 468H x 173D
Net weight (Kgs)| 5.| 5.
Wall Mounting| VESA 200 x 100 (mm)

*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
Harman Kardon is trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>