ridetech 19013699 Mustang II Upper StrongArms Instruction Manual
- June 12, 2024
- ridetech
Table of Contents
ridetech 19013699 Mustang II Upper StrongArms
Product Information
- Product Name: Mustang II Upper StrongArms
- Part Number: 19013699
- Manufacturer: RideTech
- Website: www.ridetech.com
- Contact Number: 812-482-2932
Product Usage Instructions
- Ensure you have all the included components listed above.
- Refer to the vehicle’s user manual for instructions on how to safely lift and support the vehicle.
- Remove any existing upper control arms or components.
- Install the Upper Control Arms (Part Number: 90003086) on both sides of the vehicle using appropriate hardware.
- Install the Upper Ball Joints (Part Number: 90000895) on both sides of the Upper Control Arms using the provided ball joint nut spacer and torque to 55 ft-lbs. Align the cotter pin hole with the castle nut slots and install the cotter pin.
- Attach the Upper Cross Shafts (Part Number: 90001218) to the Upper Control Arms using the provided mounting bolts. Torque the mounting bolts to 80-90 ft-lbs.
- Install the Upper Control Arm Bushings (Part Number: 90001219) on both sides of the Upper Control Arms.
- Secure the Upper Control Arm Bushings using the provided 9/16 Flat Washers (Part Number: 99563001) and 9/16-18 Thin Nylok Nuts (Part Number: 99562003). Torque the nuts to 65-75 ft-lbs when the vehicle is sitting at ride height.
For further assistance or troubleshooting, refer to the complete installation instructions available on the RideTech website or contact RideTech customer support at the provided contact number.
Recommended Tools
In the box
Upper Control Arm Components
Item **Part Number #** | Description | QTY |
---|---|---|
1 | 90003086 | Upper Control Arm |
2 | 90000895 | Upper Ball joint – Proforged # 101-10126 |
3 | 90001218 | Upper Cross Shaft |
4 | 90001219 | Upper Control Arm Bushing (Pair) |
5 | 90002283 | Ball joint Nut Spacer |
6 | 99563001 | 9/16” Flat Washer |
7 | 99562003 | 9/16”-18 Thin Nylok Nut |
Torque Specs
- Upper Ball Joint – 55 ft-lbs and tighten to align cotter pin hole with castle nut slots. Install cotter pin.
- Cross Shaft Mounting Bolts – 80-90 ft-lbs.
- Corr Shaft Nuts – 65-75 ft-lbs @ Ride Height. Torque the cross shaft nuts when the vehicle is sitting at ride height.
References
Read User Manual Online (PDF format)
Loading......