ANSMANN PSE2200 Powerstation Extension Instruction Manual
- June 12, 2024
- ANSMANN
Table of Contents
ANSMANN PSE2200 Powerstation Extension
Product Information:
Product Name: Powerstation Extension PSE2200
Operation Manual: Bedienungsanleitung Operation Manual
Technical Specifications:
- Display: 4 LEDs in 25% steps
- Energy Content: 1408 Wh
- Cell Chemistry: Lithium iron phosphate
- Operating Temperature: Not specified
- Storage Temperature: Not specified
- Size: Not specified
- Weight: 15 kg
Environmental Information/Disposal:
- Dispose of packaging after sorting by material type. Cardboard and cardboard to the waste paper, film to the recycling collection.
Liability Disclaimer:
- The information contained within these operating instructions can be changed without prior notification. We accept no liabilityfor direct, indirect, incidental or other damage or consequential damage arising though improper handling/use or through disregard of the information contained within these operating instructions.
Product Usage Instructions
No specific product usage instructions are provided in the text extract from the user manual. Please refer to the complete user manual for detailed usage instructions.
BESCHREIBUNG SYMBOLE | DESCRIPTION SYMBOLS
Verwendung nur in Innenräumen | Indoor use only
Übereinstimmung mit den EU-Richtlinien |
Conforms to the European directive
UK Conformity Assessed
Elektroschrott (WEEE-Richtlinie) | Waste of Electrical and Electronic Equipment
(WEEE-Guideline)
Batterieentsorgungsinformation – Nicht in den Hausmüll! | Battery disposal information – Not for houswhold waste
Bedienungsanleitung beachten! | Read the operating instructions carefully before use!
GENERAL
Please unpack all parts and check that everything is present and undamaged. Do
not use the product if damaged. In this case, contact your local authorised
specialist or the service address of the manufacturer.
These operating instructions contain important information for the first use
and normal operation of this product.
Read through the complete operating instructions carefully before using the
product for the first time. Read the operating instructions for other devices
which are to be operated with this product or which are to be connected to
this product. Keep these operating instructions for future use or for future
users’ reference.
Failure to follow the operating instructions and safety instructions may
result in damage to the product and hazards (injuries) for the operator and
other persons.
The operating instructions refer to applicable standards and regulations of
the European
Union. Please also adhere to the laws and guidelines specific to your country.
SAFETY – EXPLANATION OF NOTES
Please take note of the following symbols and words used in the operating instructions,on the product and on the packaging:
circle-info = Information | Useful additional information about the product
circle-check = Note | The note warns you of possible damage of all kinds
triangle-exclamation = Warning | Attention – Danger! May result in serious injury or death
PROPER INTENDED USE
The product is intended exclusively for private household use and not for
commercial use. Use outside that stipulated in the information is improper use
and this can result in damage to property or personal injury. We accept no
liability for damage caused by incorrect or improper use.
With an Ansmann Powerstation expansion module, you can double the capacity of
your mobile power source. The additional battery is connected to the main unit
with just one connection cable and supplies it with additional power.
GENERAL SAFETY INSTRUCTIONS
-
This product may be used by children from the age of 8 and by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they have been instructed on the safe use of the product and are aware of the hazards. Children are not permitted to play with the product. Children are not permitted to carry out cleaning or care without supervision.
-
Keep the product and the packaging away from children. This product is not a toy. Children should be supervised in order to ensure that they do not play with the product or packaging.
-
Observe all information and safety instructions for the device to be charged before using the Powerstation.
-
Please disconnect the Powerstation from the device being charged once it has been fully charged.
Do not charge overnight. Do not charge unsupervised. -
In order to prevent any risk of fire or electric shock, the Powerstation must be protected from moisture and rain! Never submerge the product in water or other liquids. Do not use the device if it is wet. Never operate the device with wet hands.
-
The product can be damaged by impacts, shocks or being dropped, even from low heights. Handle the product carefully! Do not continue to use a damaged device. RISK OF EXPLOSION! Dispose of the Powerstation in accordance with instructions.
-
Do not expose to potentially explosive environments where there are flammable liquids, dusts or gases.
-
The product may only be used in closed, dry and spacious rooms, away from combustible materials and liquids. Disregard can result in burns and fires.
-
Operate the product only within its power limits as cited in the technical data.
-
Before connecting an end device, check whether this can be adequately supplied with the power output of the charger.
-
Protect the product from moisture, overheating and dirt. Use it only in dry environments.
-
Never expose the product to extreme conditions, such as extreme heat/cold, fire, direct solar radiation, etc.
-
Charge your Powerstation at least once every 4 months in order to maintain its service life.
-
Do not use while still in the packaging.
-
Carry out cleaning tasks only when the mains plug has been pulled out / when the power supply has been disconnected.
-
Clean only with a slightly damp cloth, then rub it dry. Do not use hard brushes or sharp objects, abrasive cleaners or solvents.
GENERAL INFORMATION
- Do not throw or drop
- Do not open or modify the product! Repair work shall only be carried out by the manufacturer or by a service technician appointed by the manufacturer or by a similarly qualified person.
TECHNICAL SPECIFICATIONS
- Display: 4 LEDs in 25% steps
- Energy content: 1408 Wh
- Cell chemistry: Lithium iron phosphate
- Operating temperature: -20 – 55 °C
- Storage temperature: -20 – 55 °C
- Size: 360 × 270 × 280 mm
- Weight: 15 kg
DELIVERY INCLUDES
Expansion battery, connection cable, operating instructions, warranty card
- Before using the Powerstation expansion module for the first time, fully charge it once by connecting it with the compatible main unit. There is no other connection option.
- Connect the expansion battery to a compatible Powerstation using the corresponding connection port.
- Use only the CP3500 cable provided for this.
- The main unit controls the charging and discharging process fully automatically. When charging, the main unit is charged first, followed by the expansion module. When discharging, the expansion module is discharged first, then the main unit.
- To activate the charge level indicator, press the control button. The charge level is displayed with 4 LEDs in 25% steps.
ENVIRONMENTAL INFORMATION | DISPOSAL
Dispose of packaging after sorting by material type. Cardboard and cardboard
to the waste paper, film to the recycling collection.
Dispose of the unusable product in accordance with legal provisions. The
“waste bin” symbol indicates that, in the EU, it is not permitted to dispose
of electrical equipment in household waste.
For disposal, pass the product on to a specialist disposal point for old
equipment, use the return and collection systems in your area or contact the
dealer from whom you purchased the product.
Batteries and rechargeable batteries contained in electrical appliances must
be disposed of separately whenever possible.
Always dispose of used batteries & rechargeable batteries (only when
discharged) in accordance with the local regulations and requirements.
Improper disposal may result in toxic ingredients being released into the
environment,which may have adverse health effects on humans, animals and
plants.
In this way you will fulfil your legal obligations and contribute to environmental protection.
LIABILITY DISCLAIMER
The information contained within these operating instructions can be changed
without prior notification. We accept no liability for direct, indirect,
incidental or other damage or consequential damage arising though improper
handling/use or through disregard of the information contained within these
operating instructions.
- The product complies with the requirements from the EU directives.
Subject to technical changes. We assume no liability for printing errors.
Kundenservice | Customer service:
ANSMANN AG
Industriestrasse 10
97959 Assamstadt
Germany
Support & FAQ: ansmann.de
E-Mail: hotline@ansmann.de
Hotline: +49 (0) 6294 / 4204 3400
MA-1700-0170/V00/02-2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>