FIRST DEGREE FITNESS APOLLO PRO XL Rowing Trainer Fluid Rower Apollo Pro XL User Guide

USER GUIDE
APOLLO PRO XL
VIKING PRO XL Featuring Patented Adjustable
Fluid Resistance Technology

REGISTER YOUR PRODUCT AT WWW.FIRSTDEGREEFITNESS.COM/SUPPORT

Introduction

Congratulations on your purchase of the Rower.
FIRST DEGREE FITNESS is proud to present the Rower as a commercial use product featuring patented Adjustable Fluid Resistance.
Our unique combination of precision steel and solid wood frames incorporate only the highest quality American Ash which is collected using the latest technology in sustainable harvesting from renewable plantations.
Note that slight variations of colour in the wooden side rails, seat and cross-member are normal and part of Mother nature’s artistry. The wood grain patterns and subtle hues of each Rower makes every unit highly individual and designed to compliment any environment.
Follow all instructions carefully for correct assembly, Tank filling, Water Treatment, service and safety.
Access to our world-wide distributor and service network is available at www.firstdegreefitness.com
Check contents of Box 1 and Box 2 to ensure all parts are present and correct prior to assembly.
Training with the Rower

1. As with any piece of fitness equipment, consult a physician before beginning your Rower exercise program.
2. Follow instructions provided in this manual for correct foot position and basic rowing techniques.
3. For more detailed rowing techniques, please refer to our international website at www.firstdegreefitness.com

CAUTION

1. Keep hands and fingers away from moving parts, as indicated in this manual.
2. The Rower can stand vertically for storage. Make sure a secure location is chosen, such as the corner of a room or against a wall on an even, secure surface.

Note: If the storage area is not level, an additional fixture is required (sold separately) to keep the Rower stable with vertical storage position.

Safety

Safety Information

• Before using this product, it is essential to read this ENTIRE operation manual and ALL instructions. The Rower is intended for use solely in the manner described in this manual.

• UNDERSTANDING EACH AND EVERY WARNING TO THE FULLEST IS IMPORTANT

• As with any piece of fitness equipment, consult a physician before beginning your Rower exercise program.

• Please be aware that any fitness regime, before being undertaken, is best preceded by a physical checkup from a certified physician.

• Injuries to health may result from incorrect or excessive training.

• WARNING Heart rate monitoring systems may be inaccurate. Over exercise may result in serious injury or death. If you feel faint, stop exercising immediately.

• Stop the machine immediately if any signs of excessive wearing is present on the Belts, Pulleys and Bungee cords. Do not use unit until said parts are repaired or replaced.

• Do not allow children unattended access to the machine.

• The Rower can stand vertically for storage. When doing so, please follow the instructions given in the manual.

• Please keep hands away from moving parts, as indicated by the warning label on the Main Frame of your machine.

• If any of the adjustment devices are left projecting, they could interfere with the user’s movement.

• Do not store in freezing conditions with water in the Tank as it can expand and crack the components.
  Installation

• Place on a stable, flat surface in a horizontal position during use for maximum stability.

• Check all Belts, Pulleys and Bungee cords regularly for signs of wear, and replace if needed.

• Check regularly and follow all instructions for maintenance as specified in this manual.

• Replace immediately any defective parts and do not operate unit until all repairs are complete.

Proper Usage

• Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that FIRST DEGREE FITNESS equipment is used properly to avoid injury.

• Injuries may result if exercising improperly or excessively. It is recommended that all individuals consult a physician prior to commencing an exercise program. If at any time during exercise you feel faint, dizzy or experience pain, STOP EXERCISING and consult your physician.

• Keep body parts (hands, feet, hair, etc.), clothing and jewelry away from moving parts to avoid injury.

• Follow instructions provided in this manual for correct foot position and basic rowing techniques.

• For more detailed rowing techniques, please refer to our International website www.firstdegreefitness.com
  Inspection

• DO NOT use or permit use of any equipment that is damaged and/or has worn or broken parts. For all FIRST DEGREE FITNESS equipment use only replacement parts supplied by FIRST DEGREE FITNESS.

• Cables and Belts pose an extreme liability if used when frayed. Always replace any cable or Belt at first sign of wear (consult FIRST DEGREE FITNESS if uncertain).

• EQUIPMENT MAINTENANCE – Preventative maintenance is the key to smooth operating equipment as well as to keep your liability to a minimum. Equipment needs to be inspected at regular intervals.

• Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.

• DO NOT ATTEMPT TO USE OR REPAIR ANY ACCESSORY APPROVED FOR USE WITH THE FIRST DEGREE FITNESS EQUIPMENT WHICH APPEARS TO BE DAMAGED OR WORN.

• Check all Belts, Pulleys and Bungee Cords regularly for signs of wear, and replace if needed.

• Check regularly and follow all instructions for maintenance as specified in this manual.

• Replace immediately any defective parts and do not operate unit until all repairs are complete.
  Operating Warnings

• Keep children away from the equipment. Parents or others supervising children must provide close supervision of children if the equipment is used in the presence of children.

• Do not allow users to wear loose fitting clothing or jewelry while using equipment. It is also recommended to have users secure long hair back and up to avoid contact with moving parts.

• All bystanders must stay clear of all users, moving parts and attached accessories and components while machine is in operation.

• WARNING Do not insert fingers into Tank!

• CAUTION After rowing exercise, please allow the unit to sit for 5 minutes before standing it up for storage.

• CAUTION Do not fill past the calibration mark as indicated on the Tank level sticker or water spillage can occur.

• WARNING Never operate this Rower without feet properly secured in Footstraps, or without the sliding portion of the Slider Footplate locked into position!

Assembly

Product Specifications
Product Class: HC
Braking System: Speed Independent
Product Net Weight: APOLLO PRO XL – 36.04kg (79.45lb) / VIKING PRO XL – 30.84kg (67.99lb)
Product Gross Weight: APOLLO PRO XL – 44.64kg (98.41lb) / VIKING PRO XL – 38.86kg (85.67lb)
Minimum Safe Operating Surface Area: 333cm (131.09”) x 174cm (68.50”)
Dimensions: 2130mm (83.86”) Length x 540mm (21.26”) Width x 560mm (22.04”) Height
Maximum User Weight: 150kg (330lb)
Compact Footprint: 2730mm x 1140mm or upright 560mm x 540mm
Product Highlights

![FIRST DEGREE FITNESS APOLLO PRO XL Rowing Trainer Fluid Rower Apollo Pro XL

• Product Highlights](https://manuals.plus/wp-content/uploads/2023/08/FIRST- DEGREE-FITNESS-APOLLO-PRO-XL-Rowing-Trainer-Fluid-Rower-Apollo-Pro-XL-Product- Highlights.jpg)

The live area shall be not less than 60cm (23.62” ) greater than the training area in the directions from which the equipment is accessed. The live area must also include the area for emergency dismount.
Live area and Training area

![FIRST DEGREE FITNESS APOLLO PRO XL Rowing Trainer Fluid Rower Apollo Pro XL

• Training](https://manuals.plus/wp-content/uploads/2023/08/FIRST-DEGREE- FITNESS-APOLLO-PRO-XL-Rowing-Trainer-Fluid-Rower-Apollo-Pro-XL-Training.jpg) Note: Rower is not suitable for therapeutic purposes.

Rower Box 1 & 2 Contents

![FIRST DEGREE FITNESS APOLLO PRO XL Rowing Trainer Fluid Rower Apollo Pro XL

• Rower Box](https://manuals.plus/wp-content/uploads/2023/08/FIRST-DEGREE- FITNESS-APOLLO-PRO-XL-Rowing-Trainer-Fluid-Rower-Apollo-Pro-XL-Rower-Box.jpg)

Item

| Qty.| Description| Item| Qty.| Description
---|---|---|---|---|---
1| 1| Main Frame| 5| 1| Bungee Hook Mount
2| 2| Left / Right Side Rail| 6| 2| Transport Wheel Assembly
3| 1| Rower Seat| 7| 1| Siphon
4| 1| Rear Brace| 8| 1| User Guide

Hardware KIT

9| 16| M8 Washer| 14| 1| 5mm Allen Key
10| 8| M8 Standard Nut| 15| 1| 6mm Allen Key
11| 8| M8 Nyloc Nut| 16| 1| 13mm Spanner
12| 4| M6x15mm Bolt| 17| 2| Cell Battery
13| 8| MBx45mm Bolt| 18| 4| Water Treatment Tablet
Optional Equipment (Not Included)
19| 1| Optional Stand (Not Included)|  |  |

Assembly Instructions

STEP 1 Installing the Rear Brace and Transport Wheel Assembly to Side Rail
REQUIRED
Side Rail Left / Right [2] Rear Brace [4] Bungee Hook Mount [5] Transport Wheel Assembly [6] 4x M6x15mm Bolts [12] WARNING Rotate Rear Brace to correct orientation before assembly onto Side Rails
WARNING Note Transport Wheels must be mounted on the outside of Side Rails as shown on the right. Do not over tighten the Transport Wheel Axle as it may inhibit Transport Wheel rotation.
a) Start with the Rear Brace and on the underside you will find a Pre- installed Bolt. From the hardware kit, take the Bungee Hook Mount and install it onto the Rear Brace as shown. Note the orientation of the Brace and hook must be correct in order to hold the end of the Bungee Shock Cord as depicted by the arrow in the illustration, which points toward the front of Rower.b) Next, connect the Side Rail Left and Side Rail Right[2] using 4x M6x15mm Bolts[12] and Rear Brace[4]. DO NOT TIGHTEN.
Tip: Bumpstops facing inside of rail for correct assembly orientation.
c) Once the Rear Brace and Side Rails are assembled, mount the Transport Wheel Assembly[6] onto the Left/Right Side Rails[2].
Note: One Washer on outside and one Washer on the inside STEP 2 Mounting Rower Seat and Upper Main Frame
REQUIRED  Left/Right Side Rails [2] Rower Seat [3] To install the Rower Seat, spread the Left/Right Side Rails[2] slightly and drop the Rower Seat[3] into the track.
Note: Seat Indentation must face rearward. STEP 3 REQUIRED Main Frame [1] Side Rails Assembly [2] 16x M8 Washers [9] 8x M8 Standard Nuts [10] 8x M8 Nyloc Nuts [11] 8x M8 x 45mm Bolts [13] CAUTION
Nyloc Nuts must be outside the Standard Nut and Washer to properly secure assembly.
Note: Clean Wheels and tracks weekly with a soft dry cloth in order to decrease the rate of wearon both Wheels and track.
Install the Main Frame[1] onto the Side Rail Assembly[2] as shown.
You will need 8x M8x45mm Bolts[13], 16x M8 Washers[9], 8x M8 Standard Nuts[10] and 8x M8 Nyloc Nuts[11].
Secure the front Lower Bracket first, then the Footboard but DO NOT TIGHTEN. You may find that the Lower Bracket Bolts can be difficult to access. You can tighten these Bolts completely once the Rower is standing in the vertical position so for the moment,
simply align and loosely thread lower Bolts/Nuts. STEP 4 Completing the Rower Assembly

Once the Bungee Cord is attached to the Rear Brace, tighten the Bolts holding the Footboard, the Main Frame to Side Rail Bolts as they are easier to access from the vertical position.
Lower the Rower back to the Horizontal position and test for proper Bungee recoil.
Check Seat Rollers/Runners for dirt or debris before sitting on the Rower seat. Small objects captured between the Seat Rollers and Runners can damage the Wheels or running surface.
Check Runners for debris prior to each use and clean regularly.
Note: The Rower Frame Bolts require periodic checking for tightness. Do this at the end of the first month of use and again after every 12 months Choose a suitable location when standing the product for storage.
The Rower Frame can be polished with any high grade furniture polish to further highlight the rich luster of the wood finish.
Install supplied 2x D Cell Battery and check monitor function. Details regarding can be found in the Monitor section of this manual.
Choose a flat, level surface on which to use your Rower, to avoid rocking and potential premature wear.

Operation Instructions

Adjustable Resistance (AR) Tank
The Adjustable Resistance (AR) Tank, developed and patented by FIRST DEGREE FITNESS. offers a true multi-level experience. Water is moved between the “storage” and “active” chambers of the AR Tank. Your new Rowing Ergometer can adapt – at the turn of a dial – to the resistance preferred by each user.
Getting Started
To achieve minimum resistance, select “1” on the Tank adjuster. It takes 10 strokes to fill the central (storage) Tank, leaving a minimal amount of water in the outer (active) Tank. This process is always required if minimum resistance is desired. Row hard at a  teady pace (20 to 25 strokes per minute [SPM]) and put some effort into the stroke, ensuring that good form is maintained. You can make adjustments to the resistance level while you row. Your AR Tank will adapt almost instantly to increases in resistance but will take up to 10 strokes to reduce the effort required, as the central (storage) Tank fills up.
Developing Your Routine
Once you have found a level that gives you the exercise required, changes can be made to SPM and to stroke intensity to further vary your energy input. Interval training is used by most Rowers, where a period of low intensity is combined with short intervals of high intensity. Your FDF Rowing Ergometer allows for changes ‘on the fly’, to achieve multi-level resistance profiles during a single workout. For more information on exercise routines, please visit our website at www.firstdegreefitness.com Tank Filling and Water Treatment Procedures
REQUIRED Siphon [7] CAUTION Resistance adjuster must be set to ’10’ to allow for accurate filling capacity.
WARNING Do not overfill the Tank beyond the maximum indicated level of 20 liters. Refer to the Tank Level Decal on the lower side of the Tank.
NOTE In areas where tap water quality is  known to be poor, FDF recommends the use ofdistilled water.

a) Remove Tank Plug from the top of the Tank.
b) Place a large bucket of water next to the Rower. Position the Siphon[7] with rigid hose in the bucket, and flexible hose in the Tank.
Note: Make sure small breather valve on siphon is closed before filling.
c) Squeeze siphon to begin filling. Important: Do not overfill Tank d) When full, open the valve on the top of the siphon to allow excess water to escape.
e) Once filling is completed follow the water treatment schedule below, then replace the Tank Plug.

1 : This setting keeps a portion of the water in reserve creating light resistance.
10 : This setting allows the maximum amount of water to reach the flywheel for heaviest resistance .
INITIAL WATER TREATMENT
Add 1x Water Treatment Tablet per full Tank. DO NOT, UNDER ANY CIRCUMSTANCE, USE A WATER TREATMENT TABLET OTHER THAN THOSE SUPPLIED WITH YOUR UNIT. Your unit purchase includes 4x Water Treatment Tablets, which is sufficient for several years of use. To purchase additional Water Treatment Tablet, please consult your nearest regional dealer/distributor or check our website at www.firstdegreefitness.com
Removing/Changing Tank Water
a) Set Adjuster Knob to “1”
b) Row at least ten strokes to fill the storage reservoir as completely as possible.
c) Remove Tank Plug.
d) Insert rigid end of siphon into the tank, and flexible hose into a large bucket.
e) Drain tank (approx. 40% of water will remain) and then refill following directions for Tank filling as described in the Tank Filling section of this manual.
Note:

• The valve on top of the siphon must be closed to allow proper drainage.
• Water treatment will preclude the need to change tank water if the treatment schedule is maintained. Additional Water Treatment Tablet is required only when discoloration appears in the water.
• Exposure to full sunlight reduces the life of the Water Treatment Tablets. Storing the Rower away from direct sunlight will extend the time between water treatments.
• Approximately 40% of tank water will remain. It is not possible to completely drain the A/R tank without disassembly.

  NOTE: For simple, fast and efficient filling and/or drainage of the Tank, we have a battery operated pump (rechargeable via USB) available as an option. We recommend this to any commercial facility, with multiple units, that has a need to drain and refill Tanks from time to time. To purchase, contact your nearest First Degree Fitness distributor or go to our website on www.firstdegreefitness.com for details.
Long Term Water Treatment and Basic Operation
Do not use any water treatment other than the tablets supplied with this unit.
For replacement tablets, contact your local First Degree Fitness distributor. Water Treatment schedules for the ROWER will vary according to the tanks exposure to sunlight, but expect 8-12 months near a bright, sunlit window and 2 years or more for a darker
location. At the point of finding the water slightly cloudy, add a Water Treatment Tablet.
CAUTION
It is strongly recommended that a drop cloth be used under the Tank whenever the Tank Plug is opened for water treatment.
How to Adjust Resistance
Select your preferred Fluid Resistance.
NOTE: The Monitor level will automatically reflect the Fluid Resistance selected at the tank.
When adjusting resistance level, allow two strokes to feel an increase and ten strokes to feel a decrease.
Start Rowing
There are six phases to completing a rowing stroke

1.  Sit with straight legs and back, leaning forward slightly at the hips with arms out straight and hands level with the lower ribs. Swing back.

2. Legs and back straight, leaning slightly forward from the hips, arms out in front. Lean and slide forward.
   Note: Hands should now be around your knees, keeping legs straight.

3. Legs come forward, aiming to get the shins vertical. Back is still straight, and posture leaning slightly forward with arms still out front. Now drive hard, this is the CATCH.

4. Knees partially straightened so seat is now at mid-point of travel, back and arms still straight. Maintain the stroke.

5. Knees are nearly straight, back is still straight but now leaning slightly back from the hips. Arms straight. Now squeeze through.

6. Legs now fully extended. Back straight and leaning slightly back, now pull with the arms so they are close to the chest, forearms horizontal and elbows close in to the rib cage. This is the FINISH.

For more information on correct rowing technique and workout  tips visit our website www.firstdegreefitness.com/indoor-rowing- technique
CAUTION Always consult a doctor before beginning an exercise program. Stop immediately if you feel faint or dizzy.

Adjust Footplates The Footplate Slider accommodates most footsizes, and is designed to keep your feetsecurely in place as you row. The feet should be positioned so that the foot strap covers the section of the foot naturally bend as row. (e.g. The board of the foot)
TO ADJUST:
Lift the top of the Footplate from the mounting pegs and slide vertically between 1-6 to suit your foot length. Secure by hooking the Footplate back onto the mounting pegs and pushing down firmly to lock it into  position.Place feet on the foot plates and tighten the Footstraps to  ensure your feet sit firmly against the heel captures.
Note: The heel capture should bend to allow your foot to pivot naturally as you row.
**WARNING:** Never operate this Rower without feet properly secured in Footstraps, or without the sliding portion of the Footplate Slider locked into position!

Bluetooth Auto-Adjust Monitor

Auto Start: Commence exercise to activate.
Reset all values: Press and hold RESET button for 3 seconds.
Auto Power Down: Over 5 minutes. All values revert to zero after restart.

WATT: Measures peak power in watts, calculating the strength and acceleration provided to accurately measure a user’s power.
TRAINING DATA: Data gathered from each workout is displayed in a power curve and cumulative power graph, enabling real-time comparisons for effective progressive training.
AUTO ADJUST LEVEL: Built in potentiometer automatically adjusts the monitor’s resistance level according to the position of the Adjuster Knob on the tank .
BLUETOOTH CONNECTIVITY: Each Rower is fitted with the most advanced Monitor technology, enabling Bluetooth connectivity with any compatible smart device. Designed to integrate with rowing and fitness apps, the Monitor will assist with effective training progression, capturing and comparing data for the competitive individual. Including FDF Rowing APP available via FDF Website. It is compatible with 3rd party APP and Software Update via Bluetooth.
NOTE: Heart Rate Chest Strap and Touch Heart Rate Handle is sold separately.
WARNING: Heart rate monitoring systems may be inaccurate, Over exercising may result in serious injury or death. If you feel faint stop exercising immediately and seek professional medical advice.

Monitor and APP Connectivity

![FIRST DEGREE FITNESS APOLLO PRO XL Rowing Trainer Fluid Rower Apollo Pro XL

• Connectivity](https://manuals.plus/wp-content/uploads/2023/08/FIRST-DEGREE- FITNESS-APOLLO-PRO-XL-Rowing-Trainer-Fluid-Rower-Apollo-Pro-XL- Connectivity.jpg)

  1. Download the “Fluid Connect” App on the [App store] or [Google Play].
  2. While the Console is ON, the Bluetooth wil start scanning to link to the Phone/Pad.
  3. Turn on the FLUID CONNECT app in you phone.
  4. Push any work out icon, the APP will seach the available console near by.
  5. Choose the console that you wish to link.
  6. After the console link to the APP, the display of the console will only show BT on the screen.
  7. After the console link to the APP, the display of the console will only show BT on the screen.

Bluetooth Heart Rate Pairing
NOTE: Heart Rate Chest Strap and Touch Heart Rate Handle is sold separately.
STEP1 Press and hold 「UP」and「DOWN」 for 3 seconds. STEP2 The Monitor will now display 1 minute countdown time.
Note: Please turn on you heart rate device and get ready to start pairing. STEP3 The Monitor will automatically pair with the nearest Bluetooth heart rate device. When pairing is complete, the Monitor will jump back to the initial screen and begin to display the heart rate.

Calibration Procedure

STEP 2 Press and hold 「RESET」and「DOWN」for 5 seconds.
Display will show “ Level 1“ STEP 3
Turn handle to Level 2. Press Reset. Display will now show Level 3. Level 2 Calibration is complete.
STEP 4 Repeat for 3,4,5,6,7,8,9,10 Level 10 Press Reset. Level 10 remains. Calibration is complete.

Detaching the Rower Belt

1. To detach Belt, simply pull beyond the range of the normal rowing stroke until the Belt detaches from the Belt Bungee Pulley.
   Tip: You’ll hear the Velcro separating just before the Belt detaches.

2. Unhook the Bungee Shock Cord from the Rear Brace. Then, push out the Inner Clip from the Bungee Hook. Pull the Bungee through the Inner Clip until free. This will allow for the Bungee Shock Cord to be threaded completely out of the Main Frame and up to the Belt Bungee Pulley where it will be re-attached once the Rower Belt is in the proper position.

Reattaching the Rower Belt

STEP 1

Begin reattaching the Rower Belt by threading around the Rower Belt Pulley with the Velcro side facing upward as illustrated.
STEP 2
Next, thread the Belt around the Idle Wheel as shown. Once around the Idle Wheel, attach the Rower Belt to the Belt/Bungee Pulley. There is an obvious “lip” at the attachment point.
STEP 3
Wind the Rower Belt onto the Belt/Bungee Pulley until the Rower Handle is as it’s furthest forward position.
STEP 4

Rethread the Bungee Shock Cord (on opposite side of the Idle Wheel) back through the Bungee Pulleys and tie off at the Attachment Point.
STEP 5
Recoil tension will decrease over time as the Bungee Shock Cord stretches. To increase recoil tension, simply push the Inner Clip out of the Bungee Hook from behind, pull the required amount of Bungee through the Inner Clip and replace the Inner Clip into the Bungee Hook as shown below.Hint: Before reattaching the Inner Clip/ Bungee Hook, tie a slip knot under slight tension at the lower Bungee Pulley. This will keep the Bungee under tension while reassembling the Bungee Hook.

Maintenance

All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all FIRST DEGREE FITNESS equipment.
FIRST DEGREE FITNESS is not responsible for performing regular inspection and maintenance actions for your machines. Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting and recording.
CAUTION Wipe and clean the Tank, Rails, and the Seat Wheels with clean water. Do not use any chemical cleaner.

required, please contact your local service representative or go online at www.firstdegreefitness.com
for further details.|
Rowing Belt| Check every hundred hours for correct tension and for signs of wear.| The Rowing Belt should provide many years of trouble free use.
If a Rowing Belt change is required. please contact your local service representative or go online at www.firstdegreefitness.com for further details.|

Troubleshooting

had water treatment.
Local tap water is of poor quality.| Change Rower location to reduce direct exposure to sunlight. Add Water Treatment or change Tank water as directed in the Water Treatment section of this manual. Consider using distilled water to refill Tank.
Rower Belt slipping off Belt/ Bungee
Pulley.| Bungee not under enough tension.
Recoil not strong enough| Tighten Bungee Cord following the instructions in ‘reattaching the Rower Belt° section of this manual.
Inconsistent readings on the Rower
Monitor for
500meter split time and SPM (strokes per minute).| Sensor gap Faulty Sensor
Sensor has moved out of position
Wiring harness| Use the back cover of the monitor as a “Gap Tool- to check the gap between Sensor Head and Magnetic Ring. or see if the Sensor Head has moved out of position.
Please contact your nearest FDF customer service center for details
The Monitor does not illuminate after
battery
installation.| Batteries installed incorrectly or need replacing.| Replace/reinstall batteries in correct position and try again. If the LCD screen fails to
illuminate. try rotating the
batteries slightly in the monitor. If this fails. contact your local service center.
The Monitor screen illuminates. but does not register when rowing.| Loose or failed connection.
Sensor gap too wide| Check that the monitor lead is connected properly. If it is
connected then contact your local
service center. Check Sensor gap.
The Monitor LEVEL is not synchronized with the Tank LEVEL.| Monitor LEVEL needs to be recalibrated.| Please refer to *Calibration Procedure page 16 of this manual.

Optional Fixture Kit Instructions

STEP 1
A Fixture Kit for upright storage can be purchased separately.

A Fixture Kit for upright storage can be purchased separately.
STEP 2
Install the Bracket onto the Rower as shown. STEP 3
Tighten the Z Bracket Knob to fix to the Rower.
Note: Ensure the Z Bracket is Under the middle crossbar secure STEP 4
Stand the Rower up vertically with the Main Frame on the floor. Using the 8mm Allen Wrench tighten the Bolts.

International Warranty

COMMERCIAL USE
FIRST DEGREE FITNESS Limited warrants that the APOLLO PRO XL / VIKING PRO XL (model APPX / VKPX), purchased from an authorized agent and in its undamaged original packaging, is free from defects in materials and workmanship. FIRST DEGREE FITNESS Limited or its agent will, at their discretion, repair or replace parts that become defective within the warranty period, subject to the specific inclusions and exclusions below.
Main Frame – 10 Year Limited Warranty
FIRST DEGREE FITNESS will repair or replace the Apollo Metal Main Frame / Viking Wooden Main Frame of the Rower should it fail due to any defect in materials or workmanship within 10 years of the original purchase. Warranty does not apply to frame coating.
Polycarbonate Tank & Seals – 5 Year Limited Warranty
FIRST D EGREE FITNESS will repair or replace the polycarbonate Tank or seals should they fail due toany defect in materials or workmanship within 5 years of the original purchase.
Mechanical Components (of a non-wearing nature) – 2 Year Limited Warranty
FIRST DEGREE FITNESS will repair or replace any mechanical component should it fail due to any defect in materials or workmanship within 2 years of the original purchase.
Specific Inclusions
Seat Frame
Seat Rails
Shaft and Impeller Assembly
All Other Components (of a wearing nature) – 1 Year Limited Warranty
FIRST DEGREE FITNESS will repair or replace any component should it fail due to any defect in materials or workmanship within 1 year of the original purchase.
Specific Inclusions
Bungee Recoil Cord
Hand Grips & Footstraps
Polyester Rowing Belt
Seat and Seat Runners
All Pulleys, Rollers & Bearings
All rubber components
Monitor & speed Sensor (excluding replaceable batteries)
Footplates (pivoting & sliding)
General Exclusion s
Damage to the finish of any part of the machine
Damage due to neglect, abuse, incorrect assembly or use of the machine
Any charges for freight or customs clearance associated with the return or dispatch of parts
Any damage to or loss of goods during transport of any kind
Any labour cost associated with a warranty claim
General Conditions

• The serial number of the machine must be correctly registered with FIRST DEGREE FITNESS Limited or one of its appointed distributors
• FIRST DEGREE FITNESS Limited reserve the right to examine any part where replacement is claimed under warranty
• Warranty period applies only to the original purchaser from the date of purchase and is not transferable
• The product must be returned to your place of purchase in original packaging with transportation, insurance and associated charges paid for by you and risk of loss or damage assumed by you
• FIRST DEGREE FITNESS makes no other warranties except as stated here and expressly disclaims all warranties not stated in this warranty. Neither FIRST DEGREE FITNESS nor its associates shall be responsible for incidental or consequential damages
• Manufacturer’s warranty automatically commences upon sale of the product to end user or upon the expiration of one (1) year from month of manufacture, whichever occurs first

![FIRST DEGREE FITNESS APOLLO PRO XL Rowing Trainer Fluid Rower Apollo Pro XL

• QR Cord](https://manuals.plus/wp-content/uploads/2023/08/FIRST-DEGREE- FITNESS-APOLLO-PRO-XL-Rowing-Trainer-Fluid-Rower-Apollo-Pro-XL-QR- Cord.jpg)http://firstdegreefitness.com/ ONTACT US
  For customer support please visit
  firstdegreefitness.com/support
  TAIWAN
  T: +886 3 478 3306
  764 Chung Shan South Rd
  Yangmei Taoyuan
  Taiwan R.O.C.

Documents / Resources

| FIRST DEGREE FITNESS APOLLO PRO XL Rowing Trainer Fluid Rower Apollo Pro XL [pdf] User Guide
APOLLO PRO XL Rowing Trainer Fluid Rower Apollo Pro XL, APOLLO PRO XL, Rowing Trainer Fluid Rower Apollo Pro XL, Fluid Rower Apollo Pro XL, Rower Apollo Pro XL, Apollo Pro XL
---|---

References

• Product Support | Fluid Resistance Help Centre - FDF Fluid Resistance
• FDF Fluid Resistance
• FDF Fluid Resistance
• Fitness & Exercise Equipment for Your Facility or Home | Life Fitness

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>