Manaras RADIO-RE901 Universal Receiver Instruction Manual
- June 12, 2024
- Manaras
Table of Contents
- Receivers: Compatibility and Replacement
- **Replacing RADIO014/015/031/037 Receivers with a new RADIORE901
- To Delete All Transmitters from the Receiver’s Memory:
- Wiring RADIORE901 Receiver with an Electronic Control Board
- Wiring RADIORE901 Receiver to an Electromechanical Terminal Block
- Wiring RADIORE901 Receiver to an External Terminal Strip
- Customer Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Manaras RADIO-RE901 Universal Receiver
Receivers: Compatibility and Replacement
The RADIORE901 Radio Receiver is compatible with the Manaras-Opera Series “O” and “900” Fixed Code (Dip Switch Technology) Radio Control Lines as well as the Series “100” Rolling Code Technology Radio Control Line.
Universal Receiver
Replacement Product
|
Discontinued Products
RADIORE901
Universal Receiver
- Compatible with both Rolling Code and Fixed Code / Dip Switch Technology.
- Controls 1 Operator.
- Easy installation on wall close to operator or directly onto operator’s control box.
- Nema 1 enclosure (N4 option available – RADIORE901 B).
- Operates on 24VAc/Voc.
- LED indicator.
- Includes 2 mounting screws and anchors.
- Optional commercial antenna (RADIO029) and 15′ coaxial cable (CABLE015) available for increased range and distance.
|
Fixed Code/ Dip Switch Technology
RADIO014
(MR-1000) / RADIO015 (MRX-1000)
RADIORE900 / RADIORE900A
|
- Controls 1 Operator.
- Installed directly onto operator’s control box.
- Includes commercial antenna for increased range (RADIO015 / RADIORE900A).
- Operates on 24VAC/DC.
- LED indicator.
RADIO031 (MCR-32 N4) /
RADlO037 (MCR-32) /
RADIORE900B
|
- Controls 1 Operator.
- Nema 1 enclosure (RADIO037), Nema 4/12 enclosure (RADIO031 / RADIORE900B).
- Includes commercial antenna.
- Operates on 24VAC/DC.
Rolling Code Technology
RADIOKIT005
|
- Controls 1 Operator.
- Operates on 24VAC/DC
**Replacing RADIO014/015/031/037 Receivers with a new RADIORE901
Receiver and
Pairing it to an Existing Transmitter:**
- Make sure the existing transmitter is set properly (refer to the Transmitter’s Technical Note).
- Press the LEARN button on the RADIORE901 receiver. The RED LED will BLINK. You will have 15 sec. to complete the pairing or you will need to restart.
- On the existing Transmitter, press the desired Button that you wish to pair.
- The RED LED will stop blinking. The RADIORE901 has now been paired with the existing transmitter.
- Only one transmitter needs to be matched per receiver. The other transmitters with the same dip switch configuration will pair automatically.
To Delete All Transmitters from the Receiver’s Memory:
- Press and HOLD the LEARN button on the RADIORE901 receiver until the RED LED BLINKS (approx. 10 sec.) (frequency of 1 /3 sec. ON / 1 /3 sec. OFF).
Wiring RADIORE901 Receiver with an Electronic Control Board
Wiring RADIORE901 Receiver to an Electromechanical Terminal Block
Wiring RADIORE901 Receiver to an External Terminal Strip
Customer Support
For more information, please visit www.devancocanada.com or call toll free at 855-931-3334
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>