STANLEY SFMCE510B 18V Oscillating Multitool Without Battery and Charger Installation Guide

STANLEY SFMCE510B 18V Oscillating Multitool Without Battery and Charger

Product Information

Specifications:

• Brand : Stanley Fat Max
• Model : SFMCE510
• Intended Use: DIY applications such as sanding, cutting wooden materials, plastic, gypsum, non-ferrous metals, fastening elements, working soft wall tiles, and scraping small surfaces
• User Type: Suitable for professional and private, non-professional users

Product Usage Instructions

Intended Use:
Your Stanley Fat Max SFMCE510 oscillating tool is designed for various DIY applications including sanding operations, cutting wooden materials, plastic, gypsum, non-ferrous metals, fastening elements like unhardened nails and staples, working with soft wall tiles, and scraping small surfaces. This tool is suitable for both professional and private, non-professional users.

Safety Instructions
General Power Tool Safety Warnings:

1. Read all safety warnings, instructions, illustrations, and specifications provided with the power tool.
2. Ensure the work area is clean, well-lit, and free from clutter.
3. Avoid operating power tools in explosive atmospheres.
4. Keep children and bystanders away during tool operation.
5. Match power tool plugs with the appropriate outlet.

Personal Safety:

• Stay alert and focused on the task at hand.
• Wear appropriate personal protective equipment.

Power Tool Use and Care:

• Avoid forcing the power tool; use the correct power settings for each task.
• Follow proper maintenance procedures for the tool.

Battery Tool Use and Care:

• Only recharge with the specified charger to prevent fire risks.
• Use designated battery packs to avoid injury and fire hazards.
• Store battery packs away from metal objects to prevent short circuits.
• Avoid using damaged or modified battery packs to prevent unpredictable behaviour.

Intended use
Your Stanley Fat Max SFMCE510 oscillating tool has been designed for DIY applications such as sanding operations. It is also suitable for cutting wooden materials, plastic, gypsum, non-ferrous metals and fastening elements (e.g., unhardened nails, staples), working soft wall tiles and scraping of small surfaces. This tool is intended for professional and private, non professional users.

Safety instructions

General power tool safety warnings
Warning! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
2. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
3. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
5. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
2. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
5. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
8. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
2. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
   • Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
   • Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
   • Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Additional power tool safety warnings
Warning! Warning! Additional safety warnings for hand-held saws.

• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. u Keep hands away from cutting area. Never reach underneath the work piece any reason. Do not insert fingers or thumb into the vicinity of the reciprocating blade and blade clamp. Do not stabilize the saw by gripping the shoe.
• Keep blades sharp. Dull or damaged blades may cause the saw to swerve or stall under pressure. Always use the appropriate type of saw blade for the workpiece material and type of cut.
• When cutting pipe or conduit, make sure that they are free from water, electrical wiring, etc.
• Do not touch the workpiece or the blade immediately after operating the tool. They can become very hot.
• Be aware of hidden hazards, before cutting into walls, floors or ceilings, check for the location of wiring and pipes.
• The blade will continue to move after releasing the switch. Always switch the tool off and wait for the saw blade to come to a complete standstill before putting the tool down. Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated.
• The intended use is described in this instruction manual. The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury and/or damage to property.

Safety of others

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

Vibration
The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN62841 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of the power tool can differ from the declared value depending on the ways in which the tool is used. The vibration level may increase above the level stated.

When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly using power tools in employment, an estimation of vibration exposure should consider, the actual conditions of use and the way the tool is used, including taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time.

Residual risks.
Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include:

• Injuries caused by touching any rotating/moving parts.
• Injuries caused when changing any parts, blades or accessories.
• Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF.)

Labels on tool
The following pictograms are shown on the tool along with the date code:

Warning! To reduce the risk of injury, the user must read the instruction manual.

Do not stare at operating lamp.

Additional safety instructions for batteries and chargers
Batteries

• Never attempt to open for any reason.
• Do not expose the battery to water.
• Do not store in locations where the temperature may exceed 40 °C.
• Charge only at ambient temperatures between 10 °C and 40 °C.
• Charge only using the charger provided with the tool.
• When disposing of batteries, follow the instructions given in the section “Protecting the environment”.

Do not attempt to charge damaged batteries.

Chargers

• Use your Stanley Fat Max charger only to charge the battery in the tool with which it was supplied. Other batteries could burst, causing personal injury and damage.
• Never attempt to charge non-rechargeable batteries.
• Have defective cords replaced immediately.
• Do not expose the charger to water.
• Do not open the charger.
• Do not probe the charger.

The charger is intended for indoor use only.
Read the instruction manual before use.

Electrical safety

• Your charger is double insulated; therefore no earth wire is required. Always check that the mains voltage corresponds to the voltage on the rating plate.
• Never attempt to replace the charger unit with a regular mains plug.
• If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Stanley Fat Max Service Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Variable speed trigger
2. Trigger lock button
3. Main handle
4. Tool-Free accessory clamp
5. Battery
6. Battery release
7. LED light
8. Accessory attachment location

Use

Warning! Let the tool work at its own pace. Do not overload.

Charging the battery (Fig. A)
The battery needs to be charged before first use and whenever it fails to produce sufficient power on jobs that were easily done before. The battery may become warm while charging; this is normal and does not indicate a problem.

Warning! Do not charge the battery at ambient temperatures below 10 °C or above 40 °C.

Recommended charging temperature: approx. 24 °C.

Note : The charger will not charge a battery if the cell temperature is below approximately 10 °C or above 40 °C. The battery should be left in the charger and the charger will begin to charge automatically when the cell temperature warms up or cools down.

Note : To ensure maximum performance and life of lithium-ion battery packs, charge the battery pack fully before first use.

• Plug the charger (9) into an appropriate outlet before inserting battery pack (5).
• The green charging light (9a) will blink continuously indicating that the charging process has started.
• The completion of charge will be indicated by the green charging light (9a) remaining ON continuously. The battery pack (5) is fully charged and may be removed and used at this time or left in the charger (6).
• Charge discharged batteries within 1 week. Battery life will be greatly diminished if stored in a discharged state.

Charger LED Modes

Note :

• The compatible charger(s) will not charge a faulty battery pack. The charger will indicate a faulty battery pack by refusing to light.
• This could also mean a problem with a charger. If the charger indicates a problem, take the charger and battery pack to be tested at an authorized service centre.

Leaving the battery in the charger
The charger and battery pack can be left connected with the LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

Hot/Cold Pack Delay
When the charger detects a battery that is too hot or too cold, it automatically starts a Hot/Cold Pack Delay, the green LED (9a) will flash intermittently, while the red LED (9b) will remain on continuously, suspending charging until the battery has reached an appropriate temperature. The charger then automatically switches to the pack charging mode. This feature ensures maximum battery life.

Battery state of charge indicator (Fig. B)
The battery includes a state of charge indicator to quickly determine the extent of battery life as shown in figure B. By pressing the state of charge button (5a) you can easily view the charge remaining in the battery as illustrated in figure B.

Installing and Removing the Battery Pack from the tool

Warning! Make certain the lock-off button is engaged to prevent switch actuation before removing or installing battery.

To install battery pack (Fig. C)
Insert battery pack firmly into tool until an audible click is heard as shown in figure C. Ensure battery pack is fully seated and fully latched into position.

To remove battery pack (Fig. D)
Depress the battery release button (6) as shown in figure D and pull battery pack out of tool.

Belt hook (Optional extra) (Fig. E, F)

• Warning! To reduce the risk of serious personal injury, place the forward/reverse button in the lock-off position or turn tool off and disconnect battery pack before making
  any adjustments or removing/installing attachments or accessories.

• An accidental start-up can cause injury.

• Warning! To reduce the risk of serious personal injury, ONLY use the tool’s belt hook (12) to hang the tool from a work belt. DO NOT use the belt hook (12) for tethering or securing the tool to a person or object during use. DO NOT suspend tool overhead or suspend objects from the belt hook.

• Warning! To reduce the risk of serious personal injury, ensure the screw (11) holding the belt hook is secure.

• Note: When attaching or replacing the belt hook (12), use only the screw (11) that is provided. Be sure to securely tighten the screw.

• The belt hook (12) can be be attached to either side of the tool using only the screw (11) provided, to accommodate left- or right- handed users. If the hook is not desired at all, it can be removed from the tool.

• To move the belt hook, remove the screw (11) that holds the belt hook (12) in place then reassemble on the opposite side. Be sure to securely tighten the screw (11).

• Note: Various trackwall hooks and storage configurations are available.

Please visit our website www.stanley.eu/3 for further information.

Accessories

This tool includes some or all of the following accessories. The performance of your tool depends on the accessory used. Stanley Fat Max accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool.

Assembly

• Fitting and removing the accessories (fig. G – H)
  Warning! Before fitting an accessory, disconnect the tool from the mains supply/Remove battery from tool.

• Fitting a Stanley Fat Max accessory (fig. G – H)

  • Hold the tool and squeeze the accessory clamping lever (4).
  • Slide the accessory (13) between the shaft and the accessory holder making sure the accessory engages all eight pins on the holder and is flush with the shaft.
  • Release the accessory clamping lever.
    Note : Some accessories, such as scrapers and blades can be mounted at an angle if required..

• Removing a Stanley Fat Max accessory accessory

  • Hold the tool and squeeze the accessory clamping lever (4).
  • Pull the accessory from the tool making sure the accessory dis-engages from all eight pins on the holder.
  • Release the accessory clamping lever.
    Warning : Gloves must be worn when removing accessories as then may become hot during use.

• Fitting a sanding sheet (fig. J)

  • Line up the sanding sheet with the sanding base as shown. Press the sheet firmly and evenly onto the sanding base, making sure that the holes in the sheet coincide with the holes in the base.

• Removing a sanding sheet

  • Pull the sanding sheet off the sanding base.
    Warning! Never use the sanding base without a sanding sheet or accessory in place.

• Fitting the dust extraction adaptor (fig. K)

  • Line up the dust extraction adaptor (17) with the sanding base (14) as shown.
  • Press the adaptor firmly and evenly in to the sanding base.
  • Secure the adaptor by turning the locking nut (16) clockwise.
  • Connect a vacuum cleaner to the dust extraction adaptor.

• Removing the dust extraction adaptor

  • Turn the locking nut (16) anti-clockwise.
  • Pull the dust extraction adaptor (17) out of the sanding base (14).

• Fitting alternative accessories (fig. L)

  • Place the spacer (19) onto the collar (18).
  • Place the alternative accessory (20) onto the collar (18).
  • Firmly attach the fixing bolt (21) into place to ensure a tight fit for the alternative accessory (20).
  • Note : The spacer and fixing bolt are not used to attach Stanley Fat Max accessories. Black and decker accessories are attached using the Super-lokTM Tool free accessory clamping lever.

• Proper Hand Position (Fig. N)

  • Warning!
  • To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown.
  • To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction. Proper hand position requires one hand on the main handle (3).

• Switching on and off (Fig. N)

  • Warning! Be sure switch is fully OFF before installing the battery.
  • Install the battery.
  • To turn the tool ON, press the variable speed trigger (1) .
  • To turn the tool OFF, release the variable speed trigger (1).

LED work light
The LED work light (7) is activated automatically when the tool is switched on.

Low-battery Indicator
If the LED worklight (7) begins to rapidly and continuously flash when the switch on the tool is depressed, the battery pack power has run out, and the battery pack should be recharged. Unlike other battery pack types, Lithium-Ion battery packs deliver fade-free power for their entire run time. The tool will not experience a slow, gradual loss of power as you work. To signal that the battery pack is at the end of its run time and needs to be charged, the power to the tool will drop quickly. Note: The LED may also flash due to an overload or high temperature (see Battery Protection).

Use
Warning! Let the tool work at its own pace. Do not overload. Warning! Before cutting into walls, floors or ceilings, check for the location of wiring and pipes.

Lock On/Off Switch (fig. M)

• Locking the Tool Off
  • Press the lock-on/off switch (2) all the way to the right or all the way to the left to lock-off the trigger.
• Locking the Tool On
  • Push the trigger 1 to turn the unit on.
  • Push the lock-on/off switch 2 to the right or to the left.
  • While the lock-on/off switch is pushed to the right or left, release the trigger to lock the unit on.
  • Push the trigger to release the lock-on function.
  • Release the trigger to turn the tool off
• Hints for optimum use
  • Always hold the tool securely. For precision work, hold the tool near the front.
  • Clamp the workpiece whenever possible, especially when using cutting blades.
  • Do not exert too much pressure on the tool.
  • Always use the appropriate type of attachment for the workpiece material and type of cut.
  • Regularly check the condition of accessories. Replace when necessary.
  • Mark the desired starting point.
  • Switch the tool on and slowly feed attachments into the workpiece at the desired starting point.
  • Clamp a piece of plywood or soft wood to the back of the workpiece and saw through the combination in order to obtain a clear cut.
  • Do not force the cutting blade into the workpiece. Note that cutting sheet metal will normally take more time than sawing thicker wooden workpieces.
  • When cutting metal spread a thin film of oil along the cutting line before cutting.
  • When sanding new layers of paint before applying another layer, use extra fine grit.
  • On very uneven surfaces, or when removing layers of paint, start with a coarse grit. On other surfaces, start with a medium grit. In both cases, gradually change to a fine grit for a smooth finish.
  • Consult your retailer for more information on available accessories

Maintenance

Your Stanley Fat Max corded/cordless appliance/tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance on corded/ cordless power tools:

• Switch off and unplug the appliance/tool.
• Or switch off and remove the battery from the appliance/ tool if the appliance/tool has a separate battery pack.
• Or run the battery down completely if it is integral and then switch off.
• Regularly clean the ventilation slots in your appliance/tool/ charger using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:

• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the newplug.
• Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good-quality plugs.

Recommended fuse: 5 A.

Protecting the environment
Separate collection. Products and batteries marked with this symbol must not be disposed of with normal household waste. Products and batteries contain materials that can be recovered or recycled reducing the demand for raw materials. Please recycle electrical products and batteries according to local provisions. Further information is available at www.2helpU.com.

Technical data

Declaration of Conformity

• The Supply of Machinery (Safety) Regulations 2008 Cordless Oscillating Tool – SFMCE510
• Stanley Europe declares that these products described under “technical data” are in compliance with: EN62841-1:2015, EN62841-2-4:2014.
• These products conform to the following UK Regulations:
• The Supply of Machinery (Safety) Regulations, 2008, S.I. 2008/1597 (as amended).
• Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091 (as amended).
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, S.I. 2012/3032 (as amended).

For more information, please contact Stanley Europe at the following address or refer to the back of the manual.

The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Stanley Europe
Karl Evans Director – Consumer Power Tools Stanley Europe, Meadowfield Avenue, Spennymoor, DL16 6YJ, England 30/08/2021

EC declaration of conformity
MACHINERY DIRECTIVE Cordless Oscillating Tool – SFMCE510 Stanley Europe declares that these products described under “technical data” are in compliance with: 2006/42/EC, EN 62841-1:2015, EN 62841-2-4:2014 These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information, please contact Stanley Europe at the following address or refer to the back of the manual. The undersigned is responsible for the compilation of the technical file and makes this declaration on behalf of Stanley Fat Max.
Patrick Diepenbach General Manager, Benelux STANLEY FATMAX, Richard-Klinger- Strasse 11, 65510 Idstein, Germany 30/08/2021

Guarantee

Stanley Fat Max is confident of the quality of its products and offers consumers a 12 month guarantee from the date of purchase. This guarantee is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. To claim on the guarantee, the claim must be in accordance with Stanley Fat Max Terms and Conditions and you will need to submit proof of purchase to the seller or an authorised repair agent. Terms and conditions of the Stanley Fat Max 1 year guarantee and the location of your nearest authorised repair agent can be obtained on the Internet at www.2helpU.com, or by contacting your local Stanley Fat Max office at the address indicated in this manual. Please visit our website www.stanley.eu/3 to register your new Stanley Fat Max product and receive updates on new products and special offers.agent in the Stanley Fat Max catalogue or contact your local Stanley office at the address indicated in this manual. A list of authorised Stanley Fat Max repair agents and full details of our after sales service is available on the internet at: www.stanley.eu/3

FAQ

Q: Can this oscillating tool be used for cutting metal?
A: Yes, this tool can be used for cutting non-ferrous metals among other materials. Ensure proper safety precautions are taken while cutting metal.

Q: Is it safe to use this tool around water or wet surfaces?
A: It is not recommended to use power tools near water or wet surfaces to avoid electrical hazards. Keep the tool dry at all times.

References

• STANLEY® Tools: Hand Tools & Storage Products | STANLEY® Tools New Zealand
• 2helpU
• STANLEY WORLDWIDE
• STANLEY® Tools: Hand Tools & Storage Products | STANLEY® Tools Australia
• STANLEY WORLDWIDE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>