SPACETALK Adventurer Smart Watch Phone User Guide
- June 6, 2024
- SPACETALK
Table of Contents
SPACETALK Adventurer Smart Watch Phone
Quick Start Guide
Select a SIM Provider
Spacetalk Adventurer requires a Nano SIM with voice calls, SMS and at least
1GB of data per month.
Spacetalk Adventurer will work on all mobile networks in Australia.
Please note: On some mobile service providers, use of MMS Messaging services
maybe a chargeable cost in addition to your basic plan. To avoid these costs,
we recommend using the Chat message function to send and receive multimedia
messages between devices.
Activate and Recharge the SIM card
Follow the instructions provided with your SIM card to activate. You may need
a driver’s licence or a passport to complete this step. If you have a pre-paid
SIM, it is important to load credit onto your SIM card after activation. Look
for ‘recharge’ on your provider’s online web portal.
Install the SIM card
With Spacetalk Adventurer powered off, turn over the watch and carefully
remove the SIM card cover with a small lever. Install the SIM card according
to the instructions included in the box. Replace the SIM card cover and power-
on. If necessary, charge your Spacetalk Adventurer.
Downloading the Spacetalk app
The Spacetalk app is available for download from the Apple App Store or the
Google Play Store. Search for Spacetalk, install the app and accept all
permissions. Once installed, open the app and register a Spacetalk account.
Select a Subscription
Choose a subscription according to the number of devices you wish to use.
The Spacetalk app supports up to 5 Spacetalk Adventurer devices.
(Subscription of $5.99AUD/$6.99NZD for up to two paired Spacetalk Kids devices
or $8.99AUD/$9.99NZD for up to five paired Spacetalk Kids devices).
Purchase the subscription using your Apple ID or Google Play account.
Note: you may cancel or change your subscription at anytime.
Pairing your Spacetalk
On Spacetalk Adventurer tap ‘Tap to pair’ then tap start. A QR code should
appear on the watch.
Now on the Spacetalk app, select ‘Add New Device’ from the app menu and tap
the image of Spacetalk Adventurer.
Set up the watch user‘s profile, then tap ‘Continue’.
Scan the QR on the Spacetalk Adventurer using your mobile phone’s camera and
then confirm the pairing on Spacetalk Adventurer.
Tap ‘Get started’ on Spacetalk Adventurer and then complete the setup process
on the Spacetalk app.
Tips for Use
Power Button
The power button (located on the rear of the watch) can be held down for
approximately 3 seconds to power Spacetalk. To power off, hold down the rear
power button (while powered on) to prompt the wearer with options to turn off
power or restart.
Tip : Spacetalk will automatically dim the display when not in use to optimize the battery life. Simply double tap on the display to wake Spacetalk up.
Keep Spacetalk Adventurer software up to date
If you have just purchased Spacetalk Adventurer, we recommend installing the
latest software update. From the clock screen, swipe down then tap on the
“Settings” menu icon on Spacetalk. Scroll down and select ‘Software Update’.
Spacetalk Adventurer also checks for updates every few days if left on and
charging overnight. Any updates found are installed automatically.
Improving battery performance
The number of calls per day you make and receive on Spacetalk Adventurer will
have a bearing on battery performance. Increasing the location update interval
in the Settings menu of the Spacetalk app can significantly extend battery
life. Longer interval updates will significantly extend battery life. Reducing
the screen brightness level will also provide a small improvement.
Multiple users on the Spacetalk app
It is possible to share access to Spacetalk Adventurer with multiple trusted
users. NO ADDITIONAL SUBSCRIPTION is necessary for secondary accounts holders
if they are only using sharing. To share Spacetalk Adventurer watches, please
follow these steps:
Primary Account Holder:
- In your Spacetalk app, tap the 3 bars in the top left corner. Tap ‘’My Account’, then tap ‘Manage Devices’.
- Tap the device you wish to share, then tap ‘Share Access’.
- If the person you wish to share Spacetalk Adventurer with is already listed as a contact then tap ‘Select Contact’. Alternatively tap ‘Enter Email’ and enter the email address of the person you wish to share Spacetalk Adventurer with.
Secondary Account Holder:
- Use the link in the invitation to download the Spacetalk app.
- Open the app and create a new Spacetalk account. Note you must use the same email address the invitation has been sent to create your account.
- Once you have created a Spacetalk account and are logged in, tap the 3 bars in the top left corner. The invitation should appear under ‘My Devices’.
- Tap on the invitation and it will allow you to Accept or Deny. Once accepted you will have shared access to that Spacetalk Adventurer.
Troubleshooting
My Spacetalk Adventurer will not pair with the Spacetalk app
- Check Spacetalk Adventurer is receiving a network signal. This is indicated by the signal strength indicator and network operator name. Swipe down at the clock screen to reveal.
- Ensure the SIM card has been activated by the carrier. Check to see if you can call Spacetalk Adventurer’s telephone number. In some cases, it may take several hours for the provider to activate the SIM card.
- Ensure your SIM card has credit, as this is required to pair Spacetalk Adventurer. Use the SIM provider’s recharge instructions to do so.
- Power-off and power-on Spacetalk Adventurer.
- Reset Spacetalk Adventurer. This function can be found in Spacetalk Adventurer’s settings menu. You will need your 4-digit PIN to reset and this is the last 4 digits of the IMEI number. They can be found in the Information menu.
The battery is running flat quickly
Short location update intervals (e.g. 5 minutes) are not recommended for day
to day use as they will drain the battery faster. For the best battery
performance, we suggest using Spacetalk Adventurer’s Location on Demand
function in combination with a longer update interval or alternatively,
switching interval updates off.
The latest Spacetalk Adventurer software update also includes improvements to
battery life. See “Keep your Spacetalk Adventurer’s software up-to-date”
above.
Check your SIM card to ensure that it has credit balance on it. Spacetalk
Adventurer’s battery life will be affected if your SIM card runs out of
credit.
I need additional support
Visit https://www.spacetalkwatch.com/support for additional FAQ’s and
troubleshooting tips.
Alternatively, contact us:
Email:
support@spacetalkwatch.com
Telephone:1300 087 423 (AU) or 0800 087 423 (NZ) during business hours.