DOMUS CHAM-REM-3C RGBW LED RF And Bluetooth Remote Control Instruction Manual
- June 12, 2024
- DOMUS
Table of Contents
DOMUS CHAM-REM-3C RGBW LED RF And Bluetooth Remote Control
Product Information
- Product Name: CHAM-REM-3C RGBW Remote
- Item No.: 20142
- Type of Controller: RGBW Remote control
- Protocol: RF + Bluetooth
- Dimming Range : 0.1% – 100%
- Remote Color: Black
- Remote Size: (L) 136.3mm x (W) 38.9mm x (D) 10.7mm
- Transmission Frequency: 2.4GHz
- Transmission Range: 30m
- Operation Voltage: 3VDC (CR2025)
Product Usage Instructions
- Press and hold the RGB color button to select the desired color.
- Press and hold the brightness up button to increase the light intensity.
- Click the On/Off button to turn on or off the W channel. Press and hold the button to increase or decrease the light intensity of the W channel.
- Press and hold the brightness down button to decrease the light intensity.
- Press and hold the scene button to save a scene. Click the button to recall the saved scene.
- Click the RGB color changing mode button to play or pause the mode. Press and hold the button to speed up or slow down the mode.
- Click the zone buttons to choose a zone.
INSTARUCTION
CHAM-REM-3C
Variants /Item No/Details
| 20142 | CHAM-REM-3C | RGBW Remote |
|---|
Thank you for purchasing your new CHAM-REM-3C Remote control, Please take the time to read and understand the instruction sheet below. Failure to do so may void warranty.
Specifications
Type of controller:| RGBW Remote control| Remote size (mm):|
(L) 136.3mm x (W) 38.9mm x (D) 10.7mm
---|---|---|---
Protocol:| RF + Bluetooth| Transmission frequency:| 2.4GHz
Dimming range:| 0.1% – 100%| Transmission range:| 30m
Remote colour:| Black| Operation voltage:| 3VDC (CR2025)
- RF+Bluetooth RGBW remote control
- Enables to control 4 zones of receivers
- Easy & quick pairing to the RF+Bluetooth receivers by simply pushing the buttons
- Mesh network for further control distance, receivers can transmit signal to each other
- Each remote can control numerous receivers
- Each receiver can be paired to max. 8 remote controls
- The controlled receiver status can be quickly synchronised to the smart APP
- Transmission range between every two neighbour devices up to 30m
- Bluetooth low power consumption technology, long battery life
- With magnet on the back, easy fasten to & remove from the bracket
- Waterproof grade : IP20
Safety & Warnings
- This device contains lithium battery that shall be stored and disposed properly.
- DO NOT expose the device to moisture.
Pair with RF+Bluetooth receiver
Step 1: Do wiring the receiver according to wiring diagram (please refer to the instruction of RF receiver that you would like to pair with).
Note
- The lamp must be installed by professional electrician
- Ensure the power supply is switched off before fitting this product
- Do not touch the lamp when in use
- Keep away from hot steam and corrosive gas
CONTACT
- ADDRESS: 29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
- Phone: 02 9554 9600
- Fax: 02 9554 9433
- EMAIL: enquiries@domuslighting.com.au
- WEB: www.domuslighting.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>