Rode Lavalier IIa Microphone User Guide
- October 26, 2023
- Rode
Table of Contents
Insert Fastener in FreeCAD Assembly...
Insert Fastener in FreeCAD Assembly | FreeCAD Tutorial | FreeCAD Fasteners | Mechnexus |
Rode Lavalier IIa Microphone
Specifications
- Acoustic Principle Permanently polarized
- Active Electronics JFET impedance converter
- Capsule 6mm
- Polar Pattern Omnidirectional
- Frequency Range 20Hz – 20KHz
- Output Impedance 2K2Ω
- Signal to Noise Ratio 67 dB
- Equivalent Noise (A-weighted) 27dBA Typical
- Maximum SPL 106 dB SPL RMS (Plug-In Power, 1% THD) 120 dB SPL RMS (Plug-In Power, 10% THD)
- Maximum Output Level 50mV (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity -38 dB re 1 Volt/Pascal (12.59 mV @ 94 dB SPL) +/- 3 dB @ 1kHz
- Dynamic Range 79 dB Typical
- Power Requirements 8v to 5v Plugin Power
MECHANICAL SPECIFICATIONS
- Weight (grams)
- Body: 9
- Clip: 2
- Dimensions (millimeters)
- Body: L 1200, W 10, H 5
- Clip: L 21, W 20, H 8
- Compatible RØDE Products
- Wireless GO
- Wireless GO II
- AI-Micro
- RØDELink Series
Introduction
The Lavalier II is a premium lavalier microphone that is ideal for the most demanding audio and video applications. It features a unique low-profile design with a flat capsule that is incredibly discreet. The included mounting clip is also extremely compact, making the Lavalier II much easier to conceal than standard lavaliers. It has a very flat frequency response that flatters all voice types, with an omnidirectional polar pattern that picks up crystal- clear, detailed audio from all directions. The Lavalier II also comes with a premium accessory kit featuring a high-quality pop filter and mini furry windshield, coloured identification rings, and a handy zip case.
What’s In the Box?
- 1 x Lavalier II
- 1 x Pop Filter
- 1 x Mic Clip
- 1 x Mini Furry Windshield 1 x Set of Coloured ID Rings 1 x Zip Case
- Premium lavalier microphone with unique low-profile design
- Compact mounting clip
- Omnidirectional polar pattern
- Delivers broadcast-grade audio with flat frequency response
- 5mm TRS locking connector
- Includes pop filter, mini furry windshield, mic clip, set of coloured ID rings and zip case
Frequently Asked Questions
Can this lavalier be used with the RodeLink systems?
Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone is compatible for use with the RodeLink wireless microphone transmitters.
Is this lavalier included in the Rode RodeLink Filmmaker Kit?
No, the Rode Lavalier II Omnidirectional Lavalier Microphone is not included with the Rode RODELink Filmmaker Kit Digital Camera-Mount Wireless Omni Lavalier Microphone System, but could be added as an upgrade. The Rode RODELink Lav Omnidirectional Lavalier Microphone for RODELink Systems.
There’s any way to use the Rode Lavalier II with Sony UWP D systems?
No, the Rode Lavalier II Omnidirectional Lavalier Microphone is not compatible for use with Sony UWP-D Wireless Microphone Systems. Even though the locking 3.5mm connector is the same, the wiring is different. Sony uses proprietary wiring so you will need to use a microphone that is wired specifically for use with Sony transmitters. The Sony ECM-44BMP Omnidirectional Lavalier Microphone with 3.5mm Locking Mini Jack for Sony Transmitters (B&H # SOECM44BMP), the Sony ECM-V1BMP Omnidirectional Lavalier Microphone with Locking Sony 3.5mm Connector (B&H # SOECMV1BMP), and the Senal OLM-2 Lavalier Microphone with 3.5mm Locking Connector for Sony UWP Transmitters (B&H # SEOLM2S) are all compatible options.
Can it be used with the DJI Mic?
Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone should be compatible for use with the DJI Mic 2-Person Compact Digital Wireless Microphone System/Recorder for Cameras and Smartphones.
Dose this come with a mic clip? In the photos I don’t see one.
Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone includes a mic clip with purchase. Also included are a pop shield, furry windshield, set of colored rings, and zip case.
So this does plug in and work with the Wireless Go II’s?
Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone is specified as compatible with the Rode Wireless GO II system.
What extension would I use to get more length to a DSLR?
We recommend BH #ROVC1 Rode VC1 3.5mm TRS Microphone Extension Cable for Cameras.
Can you remove the locking ring?
The locking mechanism on the Rode Lavalier II Omnidirectional Lavalier Microphone (Black) is not standardly removable.
Does this work with Sennheiser lavs?
Yes, the Rode Lavalier II Omnidirectional Lavalier Microphone (Black) has a “Sennheiser” type 3.5mm wiring configuration and will work with Sennheiser wireless transmitters with 3.5mm input connections.
Why won’t my lavalier microphone work?
The microphone jack not being fully inserted into the device’s input socket, using the incorrect connector, choosing Plug-In Power on the recording device, or improperly setting the recording levels are the most frequent reasons why Purple Panda microphones stop operating.
What is the operation of a lavalier microphone?
A sound mixer can regulate and modify the audio feeds that wireless lavalier microphones send through radio waves to a receiver. Although there are many different types of lav microphones, the best ones will generate audio that is on par with a typical boom mic.