boAt PB400 EnergyShroom Power Bank User Manual

: June 12, 2024
: Boat

Table of Contents

boAt PB400 EnergyShroom Power Bank
Contents
Product Overview
Features
LED Functions
Button Functions
Charging EnergyShroom PB400
Charging Your Devices
Charging Norms & Precautionary Guidelines
Product Specification
Important User Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

boAt PB400 EnergyShroom Power Bank

EnergyShroom PB400
Thank you for choosing EnergyShroom PB400 Power Bank by boAt to power up your cherished devices. It is a high-capacity, 20000mAh portable charging device that utilizes a Li-ion polymer battery and is built for a safe, fast, and efficient user experience. It charges your beloved devices such as cell phones, tablets, MP3 players, digital cameras, etc. It has both Micro USB and Type C (2-way) input interfaces and 2 USB-A & 1 Type C (2-way) output interfaces to make for smoother connectivity.

Product Overview

Features

Supports Micro USB as well as Type C (2-Way) charging Input ports along with 2 USB-A and a Type C (2-Way) Output ports.
Built-in 12-layer Smart IC protection from short circuits, overcharges & over-discharge.
Intelligent input/output control and LED indicators.
Supports 2-way 22.5W(Max) fast charging including Quick Charge 3.0, Power Delivery, and PPS protocol support.
Ultra-portability and Durability including High Temperature and Scratch Resistance with sleek Aluminum casing.
Pass-through charging allows charging the power bank while it charges your devices.

LED Functions

Press the power button once to switch the LED indicator on and see the charging status of the power
The LED indicator will turn on to indicate the battery status of the power bank.
When your power bank or device uses Quick Charge 3.0, Power Delivery, or PPS fast charging/discharging, the top LED indicator will turn green.

Button Functions

Press the power button once to switch the LED indicator on and see the power bank’s charging status,
To switch the LED off, press the power button twice.
Press and hold the power button to stop the power bank from charging your device, and press it once again to continue charging

Charging EnergyShroom PB400

Connect the Micro-USB/ Type-C connector to the Micro-USB/ Type C port of the power bank
Then, connect the USB-A/ Type-C connector to the adaptor or laptop/computer USB port.
An LED will blink to indicate charging depending on the battery of the power bank, All 4 LEDs will light up when the power bank is fully charged
If you are charging your power bank with a compatible Quick Charge 3.0, Power Delivery, or PPS fast charger, the top LED indicator will turn green.

Note: Computer USB port output is less than the wall adapter.

Charging Your Devices

Please connect the device to the power bank using the USB-A/ Type C connector for charging.
In case the power bank doesn’t start automatically single press the power button to begin charging.
If your device supports Quick Charge 3.0, Power Delivery, or PPS fast charging while charging your devices, the top LED indicator will turn green.
When held down, the power button stops any device charging from taking place,

Note:
If you are charging your device and power bank at the same time using the Pass-through charge-discharge feature, it will result in slower charging and discharging speed.

Charging Norms & Precautionary Guidelines

Charger/Brick/Adapter: 5V/2A
Cable/Wire: Standard Cable (35 strands @0.10mm diameter/ strand)

Any other accessory can be paired up with the product as long as the specifications are as per the above norms.

Product Specification

$boAt-PB400-EnergyShroom-Power-Bank-fig- $3$$

Important User Instructions

Please utilize our standard Type C charging cable to charge the device
It is recommended to charge the power bank fully before its first use.
Do not leave the power bank inside the car lying unattended,
The product should be safeguarded against any physical shock or vibration
Keep out of reach of children.
If the power bank gets discharged completely, make sure to quickly put it into charge.
Do hot leave the battery on charge for over 24 hours.
Charging current and voltage should not exceed the maximum specified amount.

Warning

Do not drop, decompose, impact the device or repair it on your own
Do not put this product in water, exposed to fire or direct sunlight.
Do not use the product around combustible gas. It may catch fire and/or cause burns.
Do not disassemble or attempt to replace the Li-polymer battery under any circumstance, as it may damage the device permanently.

E-Waste Management

As per government rules, all E- wastes are to be managed by effective treatment under specialized methodologies prescribed by the Govt. of India.
Do not dispose of the product as unsorted municipal waste. The waste will be treated as per the norms set by the pollution control board. Please contact customer care for getting guidance on the proper disposal of this product.