KIDDE 60600 Smoke & Carbon Monoxide Alarm User Guide
- June 12, 2024
- Kidde
Table of Contents
KIDDE 60600 Smoke & Carbon Monoxide Alarm
Product Information
The product is a Smoke + Carbon Monoxide Alarm manufactured by Kidde. It is
designed to detect smoke and carbon monoxide in your home and send
notifications to your smartphone or tablet through the Kidde app. The alarm
requires a stable Wi-Fi connection to function properly. Please note that the
mobile alert services provided by the app are not intended for life safety or
critical purposes, and they do not replace third-party life safety
monitoring services.
- Product Model: P4010ACSCO-WF-CA
- Product Number: 2592-7204-00Language: English/French
Product Usage Instructions
- Step 1: Scan the QR code below with your mobile device’s camera to download and install the Kidde app. Skip this step if you already have the app installed.
- Step 2: Open the Kidde app and create a new account or log in to your existing account. Tap on “Add a device” and select “Smoke + Carbon Monoxide Alarm” from the options.
- Step 3: Follow the in-app instructions to set up and connect the alarm to the app. When prompted, scan the unique QR code found below or on the back of your alarm.
- Step 4: Complete the setup process by following the remaining in-app steps.
Please ensure that your Wi-Fi network is stable and reliable for the smartphone and tablet notifications to work properly. If you have any questions or need assistance, please contact our customer support at 1-877-542-547. For more information, you can visit our website at www.kiddecanada.com.
Connect with us on social media
- Twitter: @kiddecanada
- Instagram: @kiddecanada
- Facebook: @kiddecanada
Note: The images shown are for representation purposes only. The actual product may slightly vary. All trademarks and service marks referred to herein belong to their respective owners.
STEP 1
Scan QR code below with your mobile device. Install the Kidde app. Skip step 1 if the app was previously installed.
STEP 2
Open the Kidde app. Create & activate or log in to your account. Tap “Add a device.” Select “Smoke + Carbon Monoxide Alarm.”
STEP 3
Follow the in-App steps to set up and connect the alarm to the app. Scan your unique QR code, below or on the back of your alarm, when prompted.
STEP 4
Complete setup by following in-app steps.
WARNING: Mobile alert services are ancillary to the product and are for informational purposes only. They are not intended or suitable for life safety or critical purposes nor do these services take the place of third-party life safety monitoring services. This product’s smartphone and tablet notifications require a stable Wi-Fi connection and are only as reliable as your home Wi-Fi network. Images are representative only. Actual products may vary slightly. All trademarks and service marks referred to herein are the property of their respective owners. A Carrier Company ©2022 Carrier. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>