INSIGNIA NS-SONIC20 Sonic Portable Speaker User Guide
- June 12, 2024
- Insignia
Table of Contents
NS-SONIC20 Sonic Portable Speaker
User Guide
PACKAGE CONTENTS
- Sonic portable speaker
- USB charging cable
- Quick Setup Guide
FEATURES
- Wirelessly streams from any Bluetooth device up to 33 ft. (10 m) away
- Water resistant design (IPX5 rating) protects your speaker from water
- Rechargeable battery lasts up to 60 hours
- Speakerphone for hands-free calling
- Stereo speakers and passive radiator help deliver full sound
- True Wireless Stereo (TWS) lets you connect two Sonic speakers together to play left-and-right channel audio separately
Note: Works with Sonic speakers only, not MiniSonic speakers
Top | Back |
---|
|
Before using your new product, please read these instructions to prevent any damage.
BUTTON FUNCTIONS
BUTTON | FUNCTION |
---|---|
• Press and hold to turn the speaker on and off. |
• Press twice to announce left or right channel in TWS mode.
| In Bluetooth mode:
• Press to play/pause the content.
• Press and hold for two seconds to activate Siri or other voice control
software.
• Press to answer an incoming call and press again to hang up the call.
• Press and hold for two seconds to reject an incoming call.
• Press and hold for two seconds to switch between two calls.
• Press and hold for two seconds to switch audio between the phone and speaker
during a call.
• Double-click to re-dial the latest called number.
In AUX mode:
• Press to mute/unmute the speaker.
| • Press to increase or decrease volume.
• Press and hold to go to the previous/next song.
| • Press and hold for two seconds to connect/disconnect a Bluetooth device.
• Press twice to connect/disconnect TWS pairing.
LED INDICATOR
LED | FUNCTION |
---|---|
Blinks blue quickly | Bluetooth pairing mode |
Lights solid blue | Paired to a Bluetooth device |
Blinks blue slowly | AUX play or AUX mute |
Lights solid red | Speaker is charging (charging complete when LED turns off) |
Lights blue / red / green | Call activated |
Blinks green quickly | TWS pairing mode |
Lights solid green | TWS connected |
CHARGING YOUR SPEAKER
- Connect one end of the USB cable to the USB port on the back of your speaker.
- Connect the other end of the USB cable to a USB port on your computer or wall adapter (not included). The LED indicator is red while charging, then turns off when the speaker is fully charged.
Note: The speaker beeps continually when the battery is low.
CONNECTING AN AUDIO DEVICE
Bluetooth
- Press and hold (power) to turn on your speaker. The LED indicator blinks blue quickly and your speaker automatically enters pairing mode.
- Make sure that your Bluetooth device is within 33 ft. (10 m) of your speaker.
- Turn on your Bluetooth device, turn on Bluetooth, then enter pairing mode. For more information, see the documentation that came with your Bluetooth device.
- On your Bluetooth device, select Insignia Sonic. Your speaker pairs with your Bluetooth device and the LED indicator lights solid blue.
- To disconnect, un-pair your Bluetooth device from your speaker.
OR
Press and hold (Bluetooth) for two to three seconds on your speaker. Your Bluetooth device loses connection automatically.
3.5 mm audio cable
Connect a 3.5 mm audio cable (not included) from your speaker’s AUX jack to
your audio device’s headphone/audio out jack.
The LED indicator blinks blue slowly while connected to an audio cable.
CONNECTING YOUR SPEAKERS WITH TWS
TWS lets you connect two Sonic speakers together to play left-and-right
channel audio separately.
-
Make sure that your Sonic speakers are near each other.
-
Press (Bluetooth) twice on each speaker within one minute. Each speaker says “true wireless pairing” and they pair automatically.
Notes:
• If one Sonic speaker is already connected to your Bluetooth device, press (Bluetooth) twice on this speaker. It pairs automatically with the other one.
• If both Sonic speakers are in paring mode, press (Bluetooth) twice on either speaker. It pairs automatically.
• After they are paired, the first speaker says “paired, please connect to your device” then the green LED blinks slowly. The other speaker’s green LED is on. -
On your Bluetooth device, select Insignia Sonic. After they are connected, the speakers say “left channel” and “right channel”.
Note: If they do not pair, you may need to delete all Insignia Sonic speakers from your device and pair them again. -
Press (power) twice. The speaker announces that it is either the left or right channel so you know which side to place the speaker on.
Notes:
• While TWS is activated, only the speaker that slowly blinks green can be used for phone calls. This speaker blinks blue/red/green when a call is active.
• TWS function does not support AUX input.
TAKING A PHONE CALL
Using your speaker
The following functions are available when paired to a phone with Bluetooth:
-
Reject an incoming call:
Press and hold (Play/Pause/Call). -
Answer an incoming call:
Press (Play/Pause/Call). -
Switch audio between your speaker and phone during a call, or switch between two calls:
Press and hold (Play/Pause/Call). -
End current call:
Press (Play/Pause/Call). -
Redial the last dialed number:
Press (Play/Pause/Call) twice.
RECONNECTING TO A PAIRED DEVICE
- Make sure that the last paired Bluetooth device is near your speakers.
- When your speaker is on, it automatically searches for and tries to connect to the last paired device.
USING YOUR SPEAKER
Listening to audio
-
Connect to your speaker with Bluetooth or a 3.5 mm audio cable.
-
Play audio on your connected device.
-
Press + or – to adjust your speaker’s volume.
Note: Make sure that your connected device’s volume is set to at least 50%. -
Use the controls on your connected device to control playback.
RESETTING YOUR SPEAKER
To reset your speaker, use a paperclip to press RESET.
Note: Resetting your speaker eliminates all previous Bluetooth devices
from memory.
SPECIFICATIONS
Dimensions (H×W×D): | 2.9 × 7.9 × 2.2 in./(7.4 × 20 × 5.6 cm) |
---|---|
USB charging cable: | 20 in. (50 cm) |
Net weight: | 1.01 lbs. (460 g) |
Gross weight: | 1.23 lbs. (562 g) |
Charging current: | 5 V/2 A |
TROUBLESHOOTING
No power
- Make sure that your speaker is plugged in.
- Make sure that your speaker is turned on.
No sound or low volume
- Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and Insignia Sonic is selected.
- Turn up the volume on your speaker.
- Turn up the volume on your Bluetooth device.
- Make sure that your Bluetooth device is not muted.
- Make sure that your speaker is not paired to another Bluetooth device.
- Make sure that your Bluetooth device is not paired to another Bluetooth device.
Cannot establish Bluetooth connection
- Shorten the distance between your speaker and your Bluetooth device.
- Turn your devices off, then on. Re-pair your speaker and your Bluetooth device.
- Make sure that there is nothing plugged into the AUX jack.
- Make sure that your speaker is not paired to another Bluetooth device.
- Make sure that your speaker and Bluetooth device are both in pairing mode.
- Make sure that your Bluetooth device supports Bluetooth v4.0 and below.
- Make sure that your Bluetooth device is not connected to any other device.
- Make sure that you have selected Insignia Sonic on your Bluetooth device.
- If a passcode is needed, enter 0000.
My Bluetooth device keeps unpairing
- Shorten the distance between your speaker and your Bluetooth device.
- If the battery on your Bluetooth device is low, recharge the battery.
“Insignia Sonic” does not appear on my Bluetooth device
- Shorten the distance between your speaker and your Bluetooth device.
- Put your speaker into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device.
Sound is distorted
- Adjust the volume to the ¼ or ½ level.
- Adjust the volume settings on the output device (computer or portable audio source).
- Make sure that all connections are correct and secure.
Can my speaker connect to a TV, monitor, or DVD player?
- Yes, if the device has a Bluetooth or an AUX connection.
Can my speaker be connected to more than one device (3.5 mm and Bluetooth)?
- No. Only one sound source can be used at a time. The mode priority is AUX, then Bluetooth.
Does my speaker work with smart home devices?
- Yes, your speaker works with any Bluetooth device.
LEGAL NOTICES
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a esidential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, maybe cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC and Industry Canada radiation exposure limits
set forth for an uncontrolled environment.
Industry Canada Compliance IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation
is subject to the following two conditions:
- This device may not cause harmful interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003;
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call
1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>