SEALEY CST983.V2 Sack Truck Instruction Manual

SEALEY CST983.V2 Sack Truck

Product Information:

Sack Trucks

The Sack Trucks are available in different models with the following model numbers: CST983.V2, CST986.V2, CST987.V2, CST988.V3. These trucks are manufactured by Sealey and are made to a high standard, ensuring years of trouble-free performance when
used correctly and maintained properly.

Safety

• Always load the truck evenly with the center of gravity of the load as near the center and rear of the plate as possible.
• For large or wide loads, obtain additional support to prevent tipping.
• Do not overload the truck. Refer to the specification for the maximum capacity.
• Do not leave the truck unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.
• Avoid using the truck on uneven ground, curbs, or steps. Use a ramp instead.
• Do not allow others to ride on the truck.
• Do not use the truck if any part is damaged, especially the wheels.

Introduction

The Sack Trucks feature a strong tubular steel construction with welded joints. They have heavy-duty wheels with steel inserts for added strength and durability. The trucks can be rested on their handles for flat loading and are fitted with rubber handgrips.

Specification

• Model No: [Model Number]
• Capacity: [Capacity]
• Height(s): [Height(s)]
• Overall Width: [Overall Width]
• Platform Depth: [Platform Depth]
• Wheel Size: [Wheel Size]
• Wheel Width: [Wheel Width]

Assembly

1. Ensure the axle is clean from dust and dirt to allow free movement of the wheel.
2. For Model No’s. CST987.V2 and CST988.V3, put the axle through the frame before attaching the wheels.
3. Slide the wheel onto the axle, put on the washer, and complete by pushing the split pin through the hole in the end of the axle and bending it over to retain. Repeat for the other side.

Features

• Model CST983.V2 has solid tires.
• Models CST986.V2, CST987.V2, & CST988.V3 have pneumatic tires.
• CST983 can be rested on its handles for flat loading.
• CST988 is a case carrying model with a high back, ‘P’ handle, and flat loading capabilities.

For parts support, please visit www.sealey.co.uk, email sales@sealey.co.uk, or call 01284 757500.

Environment Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: Sealey reserves the right to alter data, specifications, and component parts without prior notice. The warranty for this product is 12 months from the purchase date, and proof of purchase is required for any claims.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

• Always load evenly with the centre of gravity of the load as near the centre and rear of the plate as possible.
• Obtain additional support for large or wide loads to prevent tipping.
  • DO NOT overload the truck – see Specification.
  • DO NOT leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.
  • DO NOT use truck on uneven ground and do not run over curbs or steps – use a ramp.
  • DO NOT allow others to ride on the truck.
  • DO NOT use the truck if any part is damaged, paying particular attention to the wheels.

INTRODUCTION

Strong tubular steel construction with welded joints. Heavy-duty wheels feature steel inserts for added strength and durability. Can be rested on handles for flat loading. Fitted with rubber handgrips.

SPECIFICATION

ASSEMBLY

WHEELS

1. Ensure axle is clean from dust and dirt to allow free movement of the wheel.
2. For Model No’s. CST987.V2 and CST988.V3 the axle (fig.1.1) needs to be put through the frame before the wheels can be attached. 4.1.3. Slide the wheel (fig.1.2) onto the axle, put on the washer (fig.1.3) and complete by pushing the split pin (fig.1.4) through the hole in the end of the axle and bending over to retain.
3. Repeat for the other side.

FEATURES

1. Model CST983.V2 has solid tyres whilst Models CST986.V2, CST987.V2, & CST988.V3 have pneumatic tyres.
2. CST983 can be rested on its handles for flat loading.
3. CST988 is a case carrying model with a high back, ‘P’ handle and flat loading capabilities.

Parts support is available for this product. Please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty : Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500
sales@sealey.co.uk
www.sealey.co.uk

© Jack Sealey Limited
Original Language Version
CST983.V2 CST986.V2 CST987.V2 CST988.V3 Issue 3 (H,3,F) 28/06/23

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>