BERNINA C23 Overlocker Curve Foot Instruction Manual
- June 12, 2024
- BERNINA
Table of Contents
Curve Foot
#C23
Overlocker
Information
Purpose
- For all overlock and cover stitches.
- For general sewing applications with facilitated fabric feed.
- For easy guiding of the material when sewing small rounded shapes and curves.
For Your Safety
Before using this accessory, please read this instruction manual as well as
the instruction manual of your machine carefully.
Markings
A Cutting Line at Cutting Width 6
B Right Needle for OL (RN)
C Left Needle for OL (LN)
D Right Coverstitch Needle RC
E Center Coverstitch Needle CC
F Left Coverstitch Needle LC
Application
Sewing Rounded Shapes and Curves
The narrow design and the shorter length of the foot sole allow maneuverable
sewing of small rounded shapes and curves.
Set the desired stitch according to the stitch overview.
Reduce the stitch length for small rounded shapes and curves. (Fig. 2) Positioning the Fabric while Sewing
Stop sewing.
Lower the needles.
Slightly raise the presser foot.
Flatten the sewing material as much as possible in front of and behind the needle.
Lower the presser foot and continue sewing. (Fig. 3)
Tip
In order to enable precise work, the knife can be deactivated for small curves and for the 3-thread overlock stitch narrow (RN).
BERNINA International AG
CH-8266 Steckborn Switzerland
www.bernina.com
© Copyright by BERNINA International AG
1067565.00A.04
2022-06 EN
Documents / Resources
|
BERNINA C23 Overlocker Curve
Foot
[pdf] Instruction Manual
C23, C23 Overlocker Curve Foot, Overlocker Curve Foot, Curve Foot, Foot
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>