VIZULO Blackbird LED Food Light Instructions
- June 12, 2024
- VIZULO
Table of Contents
VIZULO Blackbird LED Food Light
Product Information
The VIZULO Blackbird LED flood light is a high-quality, durable outdoor lighting solution. It is designed with an LED module and driver for efficient and long-lasting performance. The flood light is rated IP66 for protection against dust and water ingress and IK10 for impact resistance. It operates on a voltage range of 220-240V AC and is suitable for various configurations.
Product Usage Instructions
LED Module Replacement
- Before disassembling the luminaire, ensure that it is disconnected from the power grid.
- Unscrew the glass from the body and lift it.
- Disconnect the PCB module from the driver.
- Pay attention to the lens direction.
- Unscrew the PCB module, replace it with a new one, and screw it back into place. The number of PCB modules depends on the configuration.
- Connect the PCB module to the driver.
- Lower the glass and screw it back into place.
- Ensure proper tightening of screws with a torque of 5 Nm (T10).
LED Driver Replacement
- Before disassembling the luminaire, ensure that it is disconnected from the power grid.
- Unscrew the glass from the body and lift it.
- Disconnect the PCB module from the driver.
- Unscrew the PCB plate from the body.
- Lift the PCB plate.
- Take a reference photo and disconnect the wires from the driver.
- Unscrew the EQUI wire and the LED driver.
- Replace the LED drivers with new ones.
- Put the new LED driver into place.
- Screw the LED driver and the EQUI wire.
- Consult the reference picture for proper wire connections.
- Connect the wires to the driver.
- Place the PCB plate back and push it into position.
- Screw the PCB plate back to the body.
- Lower the glass and screw it back into place.
- Ensure proper tightening of screws with a torque of 15 Nm (T20 and T25).
Note: It is important to follow all safety instructions and regulations when installing or maintaining the luminaire. Only qualified individuals should perform any actions with the luminaire.
Depends on configuration. Check label or technical specification.
Symbols
PCB module replacement
Danger: Before disassembling the luminaire, check if it is disconnected from the power grid.
LED driver replacement
Danger: Before disassembling the luminaire, check if it is disconnected from the power grid.
Terms of use and maintenance
- Before luminaire is turned on, it should be mounted according with this mounting instruction or any other applicable regulations.
Mounting instructions
Mounting of luminaire must be performed by a qualied person according with following instructions:
- The warranty of luminaire does not apply, if the mounting of luminaire has been performed in precipitation (rain, snow, hail).
- The warranty of luminaire does not apply, if a control system unauthorized by VIZULO or an inapplicable LED driver has been used to drive the luminaire.
- The warranty of luminaire does not apply, if it has been used in an unsuitable ambient temperature or has been supplied by voltage outside of the specied range.
- The warranty of luminaire does not apply, if the LED driver program has been changed in any way.
- The warranty of the luminaire does not apply, if the logged history data of the LED driver has been deleted without the permission of VIZULO.
- The warranty of luminaire does not apply, if it has been mounted in unspecified angles or upside down (luminaire glass directed up), or it has been completely submerged under water.
Safety Instructions
Any actions with the luminaire must be performed by a qualified person, who is
certified according with national regulations and requirements.
To prevent any accidents person installing the luminaire must follow national
safety requirements and following instructions:
- The label containing technical parameters of the luminaire has to be studied before the work on it has begun.
- Any luminaire build or design changes are prohibited.
- The luminaire must be used in good technical condition and according with this instruction.
- Only VIZULO authorized spare parts and accessories can be used to repair the luminaire.
- The repair of luminaire has to be performed by a qualified and certified person.
Maintenance and repair
Luminaire has to be disconnected from electrical grid before it is opened and/or repaired!
- The person working with the luminaire must follow national regulations and legislations that apply to maintenance and testing of electrical or electronic appliances.
- The luminaire may need to be cleaned depending on its environment. Only a damp cloth or a sponge may be used to clean the luminaire. Use only household detergents diluted by water.
- Only VIZULO authorized spare parts may be used for the luminaire.
- Instruction for changing spare parts must be requested from VIZULO and studied before the repair is attempted.
- LED modules, lens and LED drivers can be changed on an installed luminaire, but it is advised to perform this task indoor to avoid water entering the luminaire.
- Spare parts (lens, LED modules and drivers) should be ordered from the information available on the luminaire label.
SIA VIZULO
Laucu Lejas, Iecava, Latvia, LV-3913
www.vizulo.com