hama 00201696 MagPower 5 5000mAh Wireless Charging Station Instruction Manual
- June 12, 2024
- Hama
Table of Contents
- Thank you for choosing a Hama product.
- Product Description
- Explanation of warning symbols and notes
- Package contents
- Safety instructions
- Operation
- Care and maintenance
- Warranty disclaimer
- Technical data
- Declaration of Conformity
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hama 00201696 MagPower 5 5000mAh Wireless Charging Station
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Product Description
Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes
Package contents
- “MagPower 5” power pack
- 2in1 wireless stand
- USB-C charging cable
- PD30W charger
- These operating instructions
Safety instructions
- Protect the product from dirt, moisture and overheating and use it in dry environments only.
- As with all electrical products, this device should be kept out of the reach of children.
- Do not drop the product and do not expose it to any major shocks.
- Do not operate the product outside the power limits given in the specifications.
- Do not open the device or continue to operate it if it becomes damaged.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordance with the statutory regulations.
- Do not modify the product in any way. Doing so voids the warranty.
- Do not incinerate the battery or the product.
- Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Do not use the product in areas in which electronic products are not permitted.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Warning – magnets
- People with pacemakers should keep away from the magnets. The magnets can negatively affect the function of the pacemaker.
- Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted.
Warning
Ensure that there are no metal parts (e.g. metal plate for magnetic holders) on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the power pack.
Operation
- To supply the power, connect the 2in1 wireless stand to the 30W PD charger included.
- To do this, connect the enclosed USB-C cable to the charger and the USB-C port (5) on the back of the 2in1 wireless stand.
Charging the MagPower 5
-
Push the MagPower 5 power pack with the induction charging area pointing forwards into the holder (6) on the 2in1 wireless stand.
-
The USB plug (7) integrated into the holder connects to the USB-C port integrated into the power pack and makes a click sound.
-
Charging of the power pack starts automatically as soon as the 2in1 wireless stand is connected to the included 30W PD charger.
-
Once the charging process is complete, the status LED (8) goes out.
Note – capacity
When the power pack is being charged in the holder, the capacity display is not visible. The charging function is only indicated via the white status LED (8) on the front of the holder. -
Alternatively, start the power pack charging process by connecting the enclosed USB-C cable to the USB-C port on the power pack (IN 5 V / 2 A or 9 V / 1.5 A) and to a suitable USB charger. To do this, consult the operating instructions for the USB charger you are using.
-
The charging process begins and ends automatically.
-
Fully charge the power pack once before using it for the first time.
Note – capacity -
During the power pack charging process, the capacity is displayed constantly.
-
Each LED (4) corresponds to 25% of the capacity. The permanent illumination of an LED indicates that the capacity has already been reached. If three LEDs light up and the fourth one flashes, the power pack is at least 75% charged.
-
If all four LEDs (4) light up, the full capacity is available.
-
Press the button on the power pack to switch this on, to determine the power pack’s current capacity and to start the wireless function.
-
The power pack switches itself off after around 40 seconds of non-use. Press the Power button twice to switch the power pack off manually. When the power pack switches off, the LED display also goes out.
Warning – rechargeable battery -
Do not charge the power pack via your PC or notebook. The charging currents can damage the USB port on the PC or notebook.
-
Only use suitable charging devices or USB ports to charge the product.
-
Do not use defective chargers or USB ports and do not attempt to repair them.
-
Do not overcharge the product or allow the battery to completely discharge.
-
Avoid storing, charging and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
-
When stored over a long period of time, batteries should be charged regularly (at least every three months).
Charging devices with the MagPower 5 Power Pack
Wireless charging with the induction charging zone:
-
first switch the power pack on using the Power button on the underside of the holder.
-
The blue function LED (2) briefly indicates the power pack’s ready state and then switches off.
-
Place your device with its back on the inductive charging zone (B).
-
The “MagPower 5” power pack is compatible with Apple MagSafe technology. The correct alignment and fixation of the device takes place automatically thanks to the magnets integrated into the power pack and the iPhone.
-
All other smartphones that support the inductive charging function should also be placed on the induction charging zone (B). In this case, however, the automatic central fixing of the device does not take place.
-
The charging process begins as soon as an effective induction field has been established. The status LED (2) lights up blue. The current charge status is displayed on your device.
-
If no induction connection can be established, change the position of your device if necessary (B). (For all smartphones that do not feature MagSafe technology)
-
If your device’s battery is fully charged, the status LED (2) goes out once when you remove the device.
-
Remove your device from the power pack’s induction charging zone and switch it off by pressing the Power button twice in quick succession. The LEDs (4) go out.
Note -
The power pack can be charged and the inductive charging function used simultaneously.
-
In the wireless stand’s holding device, the power pack automatically switches to charging mode as soon as the stand is connected to a power supply. The Power button (9) on the underside of the holder is inactive in this case. If the wireless stand is not connected via the power supply, the power pack can be switched on via the Power button (9) by pressing it once. Press the Power button (9) twice switch the power pack off again.
Charging via the power pack’s USB-C output:
- connect the enclosed USB-C charging cable to the USB-C port on the power pack (OUT 5V/ 2A, 9V/ 1.5A, 12V/ 1.1A) and with the USB-C port on your device (mobile phone, smartphone, etc.).
- In certain circumstances, the enclosed charging / connecting cable may not match the USB port on your device. In this case, use the USB cable that came with your device.
- The charging process begins automatically. During the charging process, the LEDs (4) the power pack’s remaining available capacity.
- The current battery charge status of your device is indicated on this.
- Terminate the charging process and switch the power pack off by pressing the power button twice in quick succession. The status LEDs go out.
- In the event that no device is connected, the power pack switches itself off automatically
Warning – connecting devices
- Before connecting a device, check whether it can be adequately supplied with the power pack’s current delivery.
- Ensure that the total current consumption of the connected device does not exceed 2000 mA.
- Note the instructions in your device’s operating manual.
- You must obey the instructions and safety notes contained therein regarding the supply of power to your devices.
Note – optimised charging
Optimised charging means that the power pack recognises the connected device, supplies it with the ideal current strength and therefore reduces the charging time to a minimum. Note that the power pack’s maximum current delivery is 2000 mA.
Charging devices with the 2in1 wireless stand
Charging devices with the inductive charging function
- The 2in1 wireless stand has an induction charging zone (5W) for Apple Airpods or other headphones that can be charged using inductive charging technology.
- To charge your device, place it on the inductive charging zone (10). The charging process begins automatically. The white status LED (11) indicates the charging function.
Charging devices with the USB-C port on the wireless stand
- Devices can also be charged on the wireless stand’s USB-C port (12) (OUT 5V/1A).
- The port is also suitable for using a smart watch charging pad. Please ensure that the maximum output of 5W is not exceeded.
Care and maintenance
Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Technical data
Wireless stand
USB-C input | 9 V ⎓ 3 A, 12 V ⎓ 2.5 A, 15 V ⎓ 2 A |
---|---|
USB-C outputs 1 (power pack) | 5 V ⎓ 2 A, 9 V ⎓ 2 A |
Stand induction output | 5 W (max.) |
USB-C output 2 (external) | 5V ⎓ 1A |
Total output | 5V ⎓ 1A |
MagPower5
USB-C input | 5 V ⎓ 2 A, 9 V ⎓ 1.5 A |
---|---|
USB-C output | 5 V ⎓ 2 A, 9 V ⎓ 1.5 A, 12 V ⎓ 1.1 A |
Induction output | 10 W (max.) |
Total output | 5 V ⎓ 2 A |
Battery type | 3.7 V / Li-Po |
Min. capacity | 4995 mAh / 18.48 Wh |
Typ. capacity | 5000 mAh / 18.5 Wh |
Usable capacity* | 3266 mAh @ 5 V ⎓ 2 A |
- The usable capacity is the capacity that can be drawn from the output sockets, measured at 5V Output voltage and a draw current of 2A.
PD30W charger
Specifications according to Regulation (EU) 2019/1782
Brand name, commercial register number, address| Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim, Germany
Model identifier| 00201696
Input voltage| 100-240 V
Input AC frequency| 50/60 Hz
Output voltage / output current / output power| 5.0 V DC / 3.0 A / 15.0 W
9.0 V DC / 3.0 A / 27.0 W
12.0 V DC / 2.5 A / 30.0 W
15.0 V DC / 2.0 A / 30.0 W
20.0 V DC / 1.5 A / 30.0 W PPS:
3.3-11.0 V DC / 3.0 A / 9.9-30.0 W max.
3.3-16.0 V DC / 2.0 A / 6.6-30.0 W max.
Average efficiency during operation| 78.6%
Efficiency at low load (10%)| 75.6%
Power consumption at zero load| 0.10W
Declaration of Conformity
Hama GmbH & Co KG hereby declares that the radio equipment type [00201696] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com->00201696->Downloads.
MagPower 5
Frequency band(s)| 110 kHz – 205 kHz
Maximum radio-frequency power transmitted| 1.24 dBμA/m at 3 m
Wireless stand
Frequency band(s)| 110 kHz – 205 kHz
Maximum radio-frequency power transmitted| 0.124dBμA/m at 0.15 m
Customer Support
Hama GmbH & Co KG
86652 Monheim/Germany
Service & Support
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.