EKVIP 024306 Corner Shower Instruction Manual
- June 12, 2024
- EKVIP
Table of Contents
EKVIP 024306 Corner Shower
Product Information
- Product Name: Corner Shower
- Model Number: 024306
- Manufacturer: Jula AB Country of Origin: Sweden
- Dimensions: 90 x 90 x 190 cm Weight: 50 kg
- Compliance: EN 14428:2015+A1-2018, EN 14428:2004+A1-2008
Product Usage Instructions:
Safety Instructions
WARNING! Glass is a fragile material. Use protective gloves. – Read the
instructions carefully. – Keep children away from the product.
Assembly
Before starting the assembly, make sure you have all the necessary parts. –
Follow the detailed assembly instructions provided in FIG. 2 and FIG. 3. –
Prepare the area where you want to install the corner shower. – Ensure that
the surface is level and stable. – Use appropriate tools and follow the
recommended tightening torques. 3. Maintenance: – Regularly clean the corner
shower using non-abrasive cleaning agents. – Avoid using harsh chemicals or
abrasive materials that can damage the surface. – Check for any signs of
wear or damage and replace any faulty parts immediately. 4. Troubleshooting: –
If you encounter any issues or defects with the product, refer to the
troubleshooting section in the user manual. – Contact Jula AB customer support
for further assistance. Note: This
is a general overview of the product information and usage instructions. For
detailed step-by-step instructions, please refer to the original user manual
provided by Jula AB
Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.
© JULA AB 2023-01-23
JULA AB
BOX 363, 532 24 SKARA, SWEDEN
SAFETY INSTRUCTIONS
WARNING!
Glass is very fragile. Wear safety gloves when handling it.
- For safety reasons the product is made of toughened glass. Such glass is very tough, but if subjected to knocks or blows it can later crack unexpectedly.
- Make sure not to subject the product to knocks or distortion during installation or use.
- Install the product so that there is no risk of subjecting it to knocks.
- Do not allow children to play with the product.
- Do not put stickers or adhesive film on the glass. If the glass cracks it can crack into large pieces, which can result in a risk of personal injury.
- Read these instructions carefully before installation and use. Failure to follow all instructions and safety instructions can result in a risk of personal injury and/or material damage. Save these instructions for future reference.
- Do not hang or climb on the walls, they are not made to withstand stress.
TYPE PLATE
- The product complies with the relevant EU directives
- Year of approval
- Intended use personal hygiene.
- Designation for European Standard
- Complies with requirements for cleaning
- Complies with requirements for shock-resistance/shattering
- Complies with requirements for durability
**FIG. 1
**
SYMBOLS
- Read the instructions.
- Approved in accordance with the relevant directives.
TECHNICAL DATA
- Size: 90 x 90 x 190 cm
- Weight: 50 kg
DESCRIPTION
Assembly parts.
FIG. 2
FIG. 3
SETTING UP
FIG. 4 – 13
PREPARATIONS
- Unpack and check all parts for transport damage.
- If the glass has a silk screen print the smooth side should be turned inwards.
- Walls made of wood or plasterboard can require other assembly parts (sold separately).
- Check that there are no concealed cables or pipes in the work area.
- Washer, shower head and connection hose for water supply sold separately.
NOTE
- The supplied assembly parts are only intended for installation on solid walls.
- For best results it is very important that all the wall panels are completely vertical and at right angles to each other.
- Before final assembly, check that the wall panels are watertight. Tighten the screw unions if there is any leakage. Seal with wet room silicone.
- Only use new connection hoses for the water supply. Never reuse old hoses.
- Use connection hoses that comply with the requirements in EN 61770 and national regulations.
- The incoming water pressure (hot and cold water) must be from 3 to 5 bar. Check that the pressure is the same for hot and cold water.
- Check that all the components and parts are correctly fastened before turning the water on.
- Wait 24 hours before using the shower walls to allow the silicone to fully harden.
WARNING!
Handle glass with care. Damage to edges or scratches caused during assembly
can cause the glass to crack unexpectedly. Toughened glass cracks into very
small, but sharp pieces.
MAINTENANCE
- Do not use strong or abrasive detergents or solvents, this can damage the product.
- Always read the instructions of the detergent manufacturer before using a detergent.
- Do not use steel wool, abrasive detergents or sharp implements.
- Clean regularly with a mixture of equal parts of water and vinegar. Allow the solution to act for 5 minutes and then rinse with water.
- Rinse off residual soap etc. from the walls after use.
NOTE:
Do not use abrasive or ammonia-based detergent on the product.
TROUBLESHOOTING
Leakage – make sure that surfaces to the wall and floor are sealed with wet room silicone.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>