OLIGHT Warrior Mini 3 Flashlight Light User Manual
- June 12, 2024
- OLIGHT
Table of Contents
OLIGHT Warrior Mini 3 Flashlight Light
Product Information
- Product Name: MCC Warrior Mini 3
- Product Type: Compact Rechargeable Dual-Switch EDC Flashlight
- Weight: 122g/4.3oz (Including Battery)
- Dimensions: (L)111(D)23mm / (L)4.37(D)0.91in
- Working Temperature: –
- IP Rating: IPX8
- Battery: Rechargeable Li-ion Battery 12.6Wh (3500mAh 3.6V)
- Cable Length: 0.5m
- CCT (Color Temperature): Cool White (5700~6700K)
- CRI (Color Rendering Index): 70
Product Usage Instructions
- Remove the insulating film before using the flashlight.
- To turn on the flashlight, press the ON button.
- To turn off the flashlight, press the OFF button.
- To switch between different modes, use the following actions:
- High/Turbo Mode: Double press the TURBO button.
- Moonlight Mode: Press and hold for 1 to 2 seconds.
- Low Mode: Press and hold for more than 2 seconds.
- Medium Mode: Tap the MEDIUM button.
- Strobe Mode: Triple press the TURBO button or tap and hold the MEDIUM button.
- To check the battery level, observe the indicator lights:
- Green: >60% battery remaining
- Orange: 10~60% battery remaining
- Red: 5~10% battery remaining
- Blinking Red: Battery level critically low
- To charge the flashlight, follow these steps:
- Connect the USB type A cable to the flashlight’s input.
- Connect the other end of the cable to a DC 5V 2A power source.
- The flashlight will show a red light when charging and a green light when charging is completed.
- The flashlight takes about 3.5 hours to fully charge.
Note : The above information and usage instructions are based on the data tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.
A Powerful Compact Rechargeable Dual-Switch EDC Flashlight
IN THE BOX
Specification
Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.
MCC
- Cable length 0.5m
- Input USB type A DC 5V 2A
- Output CC&CV 4.2V 2.0A
- Time to fully charge About 3.5 hours
DESCRIPTION
- Product specification, see Table 1 and Table 2;
- Remove the insulating film, see Figure 1;
- Charging, see Figure 2;
- Side switch operating instructions below:
- ON/OFF, see Figure 3;
- Lockout / unlock, see Figure 4;
- Moonlight, see Figure 5;
- TURBO, see Figure 6;
- Strobe, see Figure 7;
- Change brightness level, see Figure 8;
- Tail switch operating instructions below:
- Tap (configuration 1 only), see Figure 9;
- Press (configuration 1 only), see Figure 10;
- Tap and hold, see Figure 11;
- Press and hold to output Turbo mode (configuration 1 only), see Figure 12;
- Press and hold to output Strobe mode (configuration 2 only), see Figure 13;
- 5.6 Configuration change, see Figure 14
- Battery Indicator:
- In normal mode, see Figure 15-1;
- Moonlight mode, see Figure 15-2;
- Brand new light-sensing function:
- Obstruction caused downshift function, see Figure 16-1 and Figure 16-2;
- Forcibly return to High/Turbo, see Figure 17;
- L-shape stand application, see Figure 18;
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement. Within 5 years of purchase: Contact Olight for repair or
replacement.
Battery warranty: Olight offers a one-year warranty for all rechargeable
batteries.
MCC magnetic USB charging cable: One year.
For any of the fragile or low-value fittings not covered above, like lanyards
and clips, you can contact the post-sale within 30 days of the purchase, if it
has any quality drawback or damage under normal use conditions.
If such drawback or damage occurs after 30 days of the purchase or under
abnormal use conditions, we will only offer conditional quality assurance as
appropriate.
USA Customer Support: cs@olightstore.com
Global Customer Support:
contact@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd.4th Floor, Building 4, Kegu
Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong,
China. Made in China