Sharp 24EE7KD 24 Inch HD Ready Smart TV User Guide
- June 12, 2024
- Sharp
Table of Contents
Sharp 24EE7KD 24 Inch HD Ready Smart TV
Online Manual
To launch the Online Manual, press the [MENU] button and then select Settings>
Setup> Help Information
What is included in the box
Accessories
Included with this TV are the following accessories
- 1 x Quick Start Guide
- 1 x Safety Leaflet
- 1 x Remote Control and 2 x AAA Batteries
- 1 x Stand installation pack
Additional Accessories
If you don’t have the RF cable shown below, then you can purchase one from
www.umc-uk.co.uk/cables If you are intending
to connect your TV to an RF socket in order to receive Freeview you will need
this cable.
Microsoft PlayReady
This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReady- content access technology to protect
their intellectual property, content including copyrighted and/or WMDRM-
protected content. This device content. If uses the PlayReady device fails to
technology properly to access and enforce restrictions PlayReady-protected on
content usage, content owners may require Microsoft to revoke the device’s
ability to consume PlayReady-protected content. Revocation should not affect
unprotected content or content protected by other Icontent access
technologies. Content owners may require you to upgrade PlayReady to access
their content. f you decline
an upgrade, you will not be able to access content that requires the upgrade.
Freeview Play
Freeview Play brings together live TV viewing with “catch-up” TV services such
as BBC iPlayer, ITV Player, More4, and Demand 5. The Freeview Play Explore app
features a carousel of genres to select from when searching for programs, such
as sports, comedy, dramas, soaps, etc. Content is made up of recommendations
from major broadcasters and offers an alternative means of searching. Note
that to use the full functionality of Freeview Play your set must be connected
to the internet. Please save your box/packaging as you will need this in the
event of warranty/service repair or support. We are unable to carry out a
warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in its original
box/packaging.
Setting up the TV set for the first time
Fitting the stand
- For stand installation, there are two types of screws provided as shown below. To complete the stand installation you will require a crosshead screwdriver.
- Place the TV set on a flat and clean surface with the panel facing downwards to avoid damage.
- Attach the stand neck to the rear of the TV set using the 3 x M(4×12) screws
- Peel off the protective plastic cover then attach the stand base to the neck.
- Secure the base to the neck by using the 4 x ST(4X12) screws provided.
HELPFUL ADVICE FOR FIRST-TIME STAND INSTALLATION
When securing the self-tapping screw/s into the base of the stand (on first
installation) the screw/s will be naturally tight as they create a thread in
the plastic of the stand neck in order to support a TV of this size.
- Ensure the cross-head screwdriver tip fits correctly into the head of the screw and that it is not too big or small.
- Screw in all screws individually and partially before tightening all of the screws fully.
- If they become very tight try loosening them slightly and then re-tightening them once again as this will continue the process of creating the thread for the screws.
Connecting your set
- Connect the TV to your power socket.
- If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.
Button layout
Remote Control: Installing Batteries
Insert the batteries supplied into the remote control and press the standby button to power on the TV.
First-time installation
-
Introduction & Language
- When the set first turns on, it enters the First Time Installation mode. This can be restarted by restoring the set to default settings in the ‘About TV’ Menu.
- Select your preferred on-screen display language. This will change the language in which the menus and associated information are displayed in.
-
Country
Select the correct country in which the set will be used in. This will enable the set to correctly install the functions applicable in the country of use. -
PIN
This needs to be set to establish parental controls. -
Timezone
Set the Time Zone in which the TV will reside. This may be dependent on the country you select in step 2. -
Updates Notice
You will need to agree to certain information collection for the TV set to operate as intended. -
Network Set Up
You can connect the TV to your broadband router or wireless network in order to take advantage of the Smart functions. If you connect the TV to your router using an Ethernet cable, the Wifi set up will be skipped. -
Set up Netflix
If you have a Netflix account, it can be set up on the television here. Once set up and validated, the First Time Installation returns to the next step. -
TV Mode
Home Mode: For normal use, by default, it is set to a power-saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel). This can be changed in the picture mode settings.
Note: In home mode, the TV will switch off automatically after 4 hours in the event that no buttons are pressed on the TV or remote control. -
Channel Scan
Choose to install terrestrial channels via Digital or Analog signals.
Note: Analog signals in the United Kingdom have been turned off. Only Digital signals are available.
Win a SHARP Soundbar
Register your manufacturer’s guarantee online within 14 days of purchase at
www.registertoday.eo.uk/sharp and
enter into a prize draw to win a Sharp Soundbar Terms and conditions apply.
Online registration only.
Wall Mounting the TV
Image for illustration only.
For the dimensions of the VESA mounting, please refer to the Technical
Specifications section of this document.
- Remove the four screws that are supplied in the wall mounting holes.
- The wall mount can now be easily attached to the mounting holes on the rear of the TV.
- Install the wall mounting bracket to the television as advised by the bracket manufacturer.
The picture shows the use of spacers, which are not applicable to all sets/installations.
Connectivity
REMOTE CONTROL
Sky Remote Code
If you wish to use your Sky remote to operate the TV’s basic functions, you
will need a Sky remote control (Revision 9 or later) and you will need to
program it with the code 2134. If you wish to use your Sky Q remote to operate
the TV’s basic functions, you will need to program it with the code 4170.
Technical Specification
- The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress, and HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
- Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Need help setting up or using your TV?
- Please contact the UK & ROI Helpline
- Telephone UK 0330 024 0803 or ROl 01443 3323
- Online support at: www.umc-uk.co.uk
- Email support at: service@umc-uk.co.uk.
Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your phone provider. Hours are correct at the time of this document being published. Please note these hours are subject to change periodically. Calls to the ROl number are charged at the local call rate.
The telephone opening hours are:
- Monday to Friday: 8.30 am – брт
- Saturday: 9 am – 5 pm
- Bank Holidays: 10 am – 4 pm
Closed Christmas and New Year’s Day.