MINNO Intrepid W8 8 Inch Rugged Tablet User Guide

MINNO Intrepid W8 8 Inch Rugged Tablet

Turning on your tablet

1. The Power button is located on the front of your tablet.
2. Press and hold it for 5-10 seconds to turn the device on or off

Enabling Tablet Mode

1. Go to your Desktop
2. Select the chat bubble notification icon on the bottom rig ht corner of the screen.
3. Click on the 11Tablet Mode11 box

Changing the brightness on your tablet

1. On the home screen, press the message icon on the bottom-right of the screen to reveal the quick-access menu.
2. Move the slider at the bottom of the quick-access menu to change the brightness level.

Connect to a Wi-Fi Network

1. On the home screen, press the message icon on the bottom-right of the screen to reveal the quick access menu.
2. Tap the 11 Network11 Icon to open the Wi-Fi menu.
3. Select the Wi-Fi network you1d like to connect to.

Connect to a Bluetooth device

1. On the home screen, press the message icon  on the bottom-right of the screen to reveal the quick access menu.
2. Tap the 1 1 Bluetooth11 Icon to open the Bluetooth menu.
3. Select the Bluetooth device you1d like to connect to.

Contact us
Website: www.ruggedtablets.com
Email: info@minnotablet.com
Phone:+ l 805-962-3084

Front View

Back View

Side View

Memory & SIM Installation

Slide out the card tray and Insert the Micro SD, NC Card, or Nano SIM card into the corresponding slots. Insert the tray in the direction shown in the diagram. The slots are located underneath the battery on the tablet.

Battery Swap
Install the battery in the correct order.

1. Disengage the battery cover lock
2. Pull the cover up from the raised sides
3. Disengage the battery lock
4. Replace the battery
5. Re-engage the battery lock
6. Line up the cover pins at the top
7. Press down around the sides of the cover.
8. Re-engage the cover locks

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>