MINNO Apex-A6 6 Inch Android Rugged Tablet User Guide
- June 12, 2024
- MINNO
Table of Contents
MINNO Apex-A6 6 Inch Android Rugged Tablet
Turning on your tablet
- The Power button is located on the right edge of your tablet.
- Press and hold it for 5-70 seconds to turn the device on or off.
Brightness Settings
- On the home screen, swipe down from the top of the screen to reveal the quick-access menu.
- Swipe down again to reveal the brightness slider.
Connect to a Wi-Fi Network
- On the home screen, swipe down from the top of the screen to reveal the quick-access menu.
- Swipe down again to reveal the full icon menu.
- Press and hold the Wi-Fi icon; this will open the Wi-Fi menu which has the option to connect and disconnect to a Wi-Fi network.
Connect to a Bluetooth device
- On the home screen, swipe down from the top of the screen to reveal the quick-access menu.
- Swipe down again to reveal the full icon menu.
- Press and hold the Bluetooth icon; this will open the Bluetooth menu which has the option to pair and unpair with a Bluetooth device.
Contact us
Website: www.ruggedtablets.com
Email: info@minnotablet.com
Phone:+ l 805-962-3084
Front View
Back View
Side View 
Memory & SIM InstaIlation
Lift the plastic cover off the TF/SI M card slot on the left side of the
tablet. Use the metal SIM removal tool (provided) to slide out the TF/SIM card
tray. Insert the Micro SD, and Nano SIM card into the corresponding slots on
the tray and insert the tray back into the tablet.
Using the 2D Scanner
-
Select a cell or location where scanned data should be entered.
Note: If a barcode or QR code is scanned without first selecting a destination for the data, the device will beep but no data will be collected -
Hold down the large orange side button to activate the scanner.
-
Point the red laser field at the barcode or QR code.
-
The tablet will beep when it has captured and inserted the info into the selected field.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>