SHARP CD-BH10 Compact Disc Stereo System User Manual

SHARP CD-BH10 Compact Disc Stereo System

Product Information

The CD-BH10 is a compact disc stereo system manufactured by Sharp. It is classified as a Class 1 laser product and supports devices with Android 4.1, Jelly bean and higher. The audio coding technology used in this system is MPEG Layer-3, licensed from  Fraunhofer IIS and Thomson.

The product comes with important safety warnings and reminders. It is important to note that the device should not be opened, as it poses a risk of electric shock. Any servicing should be done by qualified service personnel. The system should not be exposed to rain or moisture to avoid the risk of fire or electric shock.

The product also complies with Part 15 of the FCC Rules, ensuring that it does not cause harmful interference and can accept any interference received without affecting its operation.

Product Usage Instructions

1. Ensure that the CD-BH10 is placed on a stable surface away from water or moisture.
2. Connect the device to a power outlet using the provided power cord.
3. To turn on the stereo system, press the power button located on the front panel.
4. To play a CD, gently open the CD tray located on the top of the system. Place the CD with the label facing up and gently close the tray.
5. Use the control buttons on the front panel or the included remote control to navigate through the different functions of the stereo system, such as play, pause, skip, and volume control.
6. For optimal sound quality, adjust the bass and treble using the equalizer settings.
7. To connect external devices, such as smartphones or tablets, use the provided auxiliary input or follow the device’s operation manual for recommended apps and procedures.
8. When not in use, it is recommended to turn off the stereo system and unplug it from the power outlet.

For further assistance or troubleshooting, consult the complete operation manual or contact the manufacturer’s customer support.

Special notes

For users in U.S.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE-MOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Explanation of Graphical Symbols:

• The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This product is classified as a CLASS 1 LASER PRODUCT
Caution: Use of any controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by SHARP is under license. Other trademarks and trade names are those of their respective owners.

FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located at the rear of the unit. Please retain this information.

• Model number ___
• Serial number ___
• Date of purchase ____
• Place of purchase____

NOTES

• This audio system supports devices with Android 4.1, Jelly bean and Higher.
• For device with a lower Android version, refer the operation manual of the device for recommended app(application).

Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay- audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

FCC Statement
FCC Notice
Supplier’s Declaration Of Conformity
SHARP COMPACT DISC STEREO SYSTEM CD-BH10 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Responsible Party:
MIZARI ENTERPRISES, INC.
5455 WILSHIRE BOULEVARD, SUITE 1410 LOS ANGELES, CA90036
TEL: 1-877-506-4900

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It must not be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20 cm from nearby persons.

IC Radiation Exposure Statement (For Users In Canada)
This Class B digital apparatus complies with the Canadian ICES-003.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference, and
2.  This device must accept any interference, including interference that may cause undesired operation.

To maintain compliance with the RF exposure guidelines, place the product at least 20 cm from nearby persons.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of this product, please read the following precautions carefully before use.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been ex-posed to rain or moisture, does not operate normally, or has been dropped.
15. Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For product intended to operate from battery power, or other sources, refer to the operating instructions.
16. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
18. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
19. When the AC cord or plug is damaged,
20. If liquid has been spilled, or objects have fallen into the product,
21. If the product has been exposed to rain or water,
22. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,
23. If the product has been dropped or damaged in any way, and
24. When the product exhibits a distinct change in performance – this indicates a need for service.
25. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
26. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
27. Wall or ceiling mounting – When mounting the product on a wall or ceiling, be sure to install the product ac-cording to the method recommended by the manufacturer.
28. Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
29. Protective Attachment Plug – The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If re-placement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.
30. Stand – Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an un-stable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

Precautions
General

• Keep your equipment at least 4” (10 cm) of free space  along the sides, top and back for proper ventilation.
• Use the unit on a firm, level surface free from vibration.
• Place the unit at least 12” (30 cm) away from any CRT TV to avoid color variations across the TV screen. If the variations persist, move the unit further away from the TV. LCD TV is not prone to such variation.
• Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.
• Do not expose the unit to moisture, to temperatures higher than 104˚F (45˚C) or to extremely low temperatures.
• If the unit does not work properly, unplug and plug it in again. Then turn on the unit.
• In case of an electrical storm, unplug the unit for safety.
• Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires.
• Do not place anything on top of the unit.
• The AC power plug is used as a disconnect device and shall always remain readily operable.
• Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
• This unit should only be used within the range of 32˚F
  – 104˚F (0˚C – 45˚C).

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

Warning:
The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.

Volume Control
The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes.

Before use

• Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors.
• Do not open the cabinet as this might result in damage to the circuitry or electrical shock, if a foreign object should get into the set, contact your dealer.
• When removing the power plug from the wall outlet, always pull directly on the plug, never pull the cord.
• Do not attempt to clean the unit with chemical solvents as this might damage the unit. Use a clean, dry cloth.
• In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as a vacation.
• Keep this manual in a safe place for future reference.

Warranty (USA)

CONSUMER LIMITED WARRANTY (Valid in the U.S. Only)
MIZARI ENTERPRISES, INC. warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of MIZARI.
The warranties described herein shall be the sole and exclusive warranties granted by MIZARI and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfilment of all liabilities and responsibilities of MIZARI to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall MIZARI be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall MIZARI be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage (if any):
What to do to Obtain Service:

CD-BH10
COMPACT DISC STEREO SYSTEM
(Be sure to have this information available when you need service for your Product.)
One (1) year parts and labor from the date of purchase. Accessories, supplies, and consumable items.
Call Sharp toll free at 1-877-506-4900
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-877-506-4900

SHARP is a registered trademarks of SHARP CORPORATION; used under license by SHARP Corporation
MARKETED BY : MIZARI ENTERPRISES, INC.
5455 WILSHIRE BOULEVARD, SUITE 1410,
LOS ANGELES, CA 90036
SHARP NORTH MALAYSIA SDN. BHD.
LOT 202, BAKAR ARANG INDUSTRIAL ESTATE,
08000 SUNGAI PETANI, KEDAH, WEST MALAYSIA.

Warranty (Canada)
CONSUMER LIMITED WARRANTY (Valid in Canada Only)
MIZARI ENTERPRISES, INC. warrants to the first purchaser for this Sharp brand product (“Product”), when shipped in its original container and sold or distributed in Canada by MIZARI or by an authorized MIZARI dealer, and Product was not sold “as is” or “sales final” that the Product will during the applicable warranty period, be free from defects in material and workmanship, and will within the applicable warranty period, either repair the defective Product or provide the first purchaser a replacement of the defective Product.
Conditions: This limited warranty shall not apply to:

• Any cosmetic damage to the Product surface or exterior that has been defaced or caused by normal wear and tear.
• Any defects caused or repairs required as a result of damage caused by any external or environmental conditions, including but not limited to, transmission line/power line voltage or liquid spillage or acts of God.
• Warranty claims for Products returned with illegible or without appropriate model, serial number and CSA/cUL markings.
• Any Products used for rental or commercial purposes.
• Any installation, delivery, setup and/or programming charges.
• Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner’s manual or other applicable Product documentation.
• Any defects caused or repairs required as a result of any Product that has been tampered with, modified, adjusted or repaired by any person other than MIZARI, a Sharp authorized service center or a MIZARI authorized servicing dealer.
• Any defects caused or repairs required as a result of the use of the Product with items not specified or approved by MIZARI, including but not limited to, head cleaning tapes and chemical cleaning agents.
• Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the Product, including but not limited to, earphones, remote controls, AC adapters, batteries, temperature probe, trays, filters, belts, ribbons, cables and paper.

How to get service: Warranty service information may be obtained calling 905-568-7140. No other person (including any MIZARI dealer or service center) is authorized to extend, enlarge or transfer this warranty on behalf of MIZARI. The purchaser will be responsible for any and all removal, reinstallation, transportation and insurance costs incurred.
The express warranties in this limited warranty are, except for consumer purchasers domiciled in Quebec, in lieu of and, except to the extent prohibited by applicable law, MIZARI disclaims all other warranties and conditions, express or implied, whether arising by law, statute, by course of dealing or usage of non-infringement.
Limitations: (not applicable to consumer purchasers domiciled in Quebec to the extent prohibited under Quebec law): (a) MIZARI shall
not be liable for any incidental, special, consequential, economic, exemplary or indirect damages of any kind or nature (including lost profits or damages for loss of time or loss of use or loss of data) arising from or in any connection with the use or performance of a Product or a failure of a Product, even if MIZARI is aware of or has been advised of the possibility of such damages; (b) the remedies described in this limited warranty constitute complete fulfillment of all obligations and responsibilities of MIZARI to the purchaser with respect to the Product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. Some provinces may not allow the exclusion or limitation of certain damages, or limits on the duration or voiding of implied warranties or conditions; in such provinces, the exclusions and limits herein may not apply. This limited warranty is, except for consumer purchasers domiciled in Quebec, governed by the laws of the Province in Canada in which the purchaser has purchased the Product. For consumer purchasers domiciled in Quebec this limited warranty is governed by the laws of Quebec.

WARRANTY PERIODS (calculated from the date of original purchase): Parts & Labour (exceptions noted)

Audio Product 1 year
To obtain the name and address of the nearest Authorized Mizari Service Center or Dealer, or for more information on this Limited Warranty, Mizari Extended Warranty Offers, Products or Accessory Sales, please contact Sharp:
By calling Sharp Electronics Of Canada Ltd. at 905-568-7140

THIS LIMITED WARRANTY IS VALID ONLY IN CANADA
SHARP is a registered trademarks of SHARP CORPORATION; used under license by SHARP Corporation
TO OBTAIN SUPPLY, ACCESSORY OF PRODUCT INFORMATION, CALL 905-568-7140
MARKETED BY: MIZARI ENTERPRISES, INC.
1274 RINGWELL DRIVE, UNIT #2
NEWMARKET, ON L3Y 9C7

CANADA
SHARP NORTH MALAYSIA SDN. BHD.
LOT 202, BAKAR ARANG INDUSTRIAL ESTATE,
08000 SUNGAI PETANI, KEDAH, WEST MALAYSIA.

Introduction

Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.

Accessories

Please confirm that only the following accessories are included.

Controls and indicators

Top Panel

1. Speaker

2. Standby

3. USB Slot

4. Open/Close

5. LINE IN

6. Input

7. Play/Pause

8. Previous

9. Disc Tray

10. Next

11. Volume Adjuster

12. Display Screen
    Rear Panel
    

13. FM Antenna

14. AC Power Input

Remote control

1. STANDBY: Press to turn on or enter standby.
2. CLOCK: Press this to enter Clock mode.
3. SLEEP: Press this to select a sleep time.
4. DIMMER: Press this to adjust the display brightness.
5. PROG/MEMORY: Press this to select a preferred station and save.
6. FAST REWIND/PREVIOUS: Press this to return to the previous track and hold down for fast rewind playback.
7. PLAY/PAUSE: Press this to pause a playback and press it again to resume the playback.
8. FOLD+: Press this to skip the next folder.
9. FOLD-: Press this to return to the previous folder.
10. 10+/TUNING : Press this to forward ten tracks or fine tune (increase) the frequency.
11. 10-/TUNING : Press this to rewind ten tracks or fine tune (decrease) the frequency.
12. VOL -: Press this to decrease volume.
13. EQ: Press this to select the sound equalizer pre-set.
14. OPEN/CLOSE: Press this to open or close the disc tray.
15. INPUT: Press this repeatedly to switch between CD, LINE IN, BLUETOOTH, USB, and FM TUNER modes.
16. REPEAT: Press to repeat the song in CD mode.
17. FAST FORWARD/NEXT: Press this to skip to the next track and hold down for fast forward playback.
18. RANDOM: Press this to play music in random order.
19. STOP/AUTO: Press this to stop a playback or hold down to do auto-scanning. Press it again to stop auto-scanning.
20. VOL +: Press this to increase volume.
21. MUTE: Press this to turn off the sound temporarily. Press it again to turn it on.

Fitting or replacing the remote control battery
Use 1 “AAA” size battery (UM/SUM-4, R3, HP-16 or similar).

1. Remove the battery compartment cover on the back of the remote control.
2. Load one AAA/1.SV battery into the battery compartment making sure that the battery have been inserted with the correct polarities matching the symbols +, – as indicated inside the battery compartment.
3. Replace the battery cover and clip it in place.

Caution:

• Remove the battery if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage.
• Do not use rechargeable battery (nickel-cadmium battery, etc.).
• Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
• Risk of fire explosion if the battery is replaced by an incorrect type.
• Installing the battery incorrectly may cause the unit to malfunction.

Notes concerning use:

• Exposing the sensor on the unit and remote control to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
• Keep the remote control away from moisture, heat shock, and vibrations.

System connection

Preparation for use
Make sure to unplug the AC power cord before making any connections.

1. Please ensure that the voltage marked on the rating label on the rear panel is the same as the voltage in your area. Insert the end of the power lead into the AC IN socket on the back of the unit. Plug the other end of the cable into the wall socket.
2. Press the STANDBY button on the main unit to turn it ON. Extend the ANTENNA to get the best reception. Press the source button on the unit, or FM button on the remote control to enter the FM mode. To use the radio in FM mode, follow the instructions in the FM RADIO OPERATION chapter.
3. Press the button on the unit, or INPUT button on the remote control button to enter the CD mode. Press the button to open the disc drawer and insert a disc. Press the button again to close. The CD will begin playing from the first track.
4. Press the button on the unit or the INPUT button on the remote control button to enter the LINE IN (Audio) mode. Connect your audio device to the LINE IN socket via a 3.5mm aux-in cable. Control playback via your connected audio device
5. Press the button on the unit or the INPUT button on the remote control button to enter Bluetooth mode. Activate the Bluetooth-enabled device and select the “CD-BH10 SHARP”. Select the song you want and press to play.
6. Press the button on the unit or the INPUT button on the remote control to enter the USB mode. Plug the USB device into the USB port on the unit’s front panel, and it will read the USB and play automatically.

Basic functions

Switching modes
To switch between the modes: CD, FM, Bluetooth, USB and LINE IN, press the button on the unit or the INPUT button on the remote control.

Volume control

1. Increase: Rotate the VOLUME control on the main unit clockwise or press the VOL+ button on the remote.
2. Decrease: Rotate the VOLUME control on the main unit anticlockwise or press the VOL- button on the remote.

EQ effects
Press the EQ button on the remote repeatedly to cycle through a set of equalizer presets to adjust the sound. Choose from CLASSIC, ROCK, POP, JAZZ, DANCE, LIVE and Off.

Mute function
Press the button at any time to mute the sound output. Press again to unmute.

Standby mode
Press the STANDBY button on the unit or the remote to put the system into standby mode. To resume normal operation, press this button again.
Note: This unit is designed to enter STANDBY mode automatically, after about 15 minutes (approximately) of inactivity. Press STANDBY button to wake the unit.
Note: When you power on the unit from standby, it will resume in the mode that was last used.

Operations

FM radio operation

1.  Press the button on the unit or the INPUT button  on the remote control to enter the FM mode. (FM frequency: 87.50-108.00MHz)
2. Press the Tuning or buttons on the remote control to decrease or increase the frequency in 0.05MHz increments.
3. Press and hold the buttons on the remote control to scan through the frequency range quickly. The scan will stop once it has found a station.
4. Press and hold the button to scan through the frequency range quickly; it will store any stations found automatically.
5. SAVE a station: You can store up to 40 FM stations in memory.
6. Press the PROG/MEMORY button and enter the frequency you want to store using the number buttons.
7. Press the SAVE button. It will show ” P01″ on the display.
8. Press the button to select the station preset number under which you want to save the frequency. Press the PROG/MEMORY button again to confirm. Recall the preset stations:
9. Press the button to recall your stored stations.

CD operation

1. Press the INPUT button on the unit, or INPUT button on the remote control to enter the CD mode. Press the button to open the disc drawer, put a CD in, then press the button again to close.

2. Press the button to pause or play the song.

3. Press the  button on the remote control to stop playing, press the button to restart.

4. Press the button to skip to the previous or next song.

5. Press the  button on the remote control to  fast forward or fast rewind the playback, and press repeatedly to resume normal speed.

6. To select a specific song directly, and press the number buttons 0-9 on remote control.
   Example:
   If the track number consists of two digits, for example, 25, press button “2“, and then button “5“ to select the 25th track.
   If the track number is a one-digit number, for example, 9, press “0“ first, then “9“ to skip to the 9th track.

7. REPEAT button: While in playing mode, press the button to set repeat mode.
   Press the button to repeat playing songs for CD and CD-R discs .
   Press once to repeat current song. Press again to repeat all tracks.
   Press a third time to cancel.

8. Press the button on the remote control to play the  tracks in random order. Press again to resume.

9. You can set the disc to play tracks in a programmed order:
   Press the button on the remote control to stop playing.
   Press the PROG/MEMORY button on the remote control.
   The screen displays: P01.
   Press the number buttons on the remote control to select the tracks to program.
   Press the buttons on the remote control to skip  between the program tracks.
   Press the PROG/MEMORY button on the remote control to confirm.
   To begin the programmed order, press the button.
   To cancel the program sequence, press the button twice.

Notes:
MP3 format is supported.
Unsupported file formats are skipped.
For example, Word documents(.doc) or MP3 files with extension .dlf are ignored and not played.

Bluetooth operation
Pairing and playback

1. Press the button on the unit, or button on the remote control button repeatedly to enter the Bluetooth mode, the “bt“ message appears and flashes on the display.
2. Activate your Bluetooth device and select the search mode.
3. Select “CD-BH10 SHARP” from the search list and connect.
4. Enter “0000“ for a password if prompted.
5. When the devices are connected to each other, a confirmation sound will be made. “bt” will stop flashing in the display.
6. You can now playback music from your device. Please note that the volume on the Bluetooth source device operates independently to the volume of the unit.
7.  To turn off the Bluetooth function: switch to another function on this unit, disable the function on your Bluetooth source device, or press the button on the remote control.

USB operation
It is possible to listen to music via the USB device interface of the unit.

Connecting a USB device:

1. Switch the unit on and select USB mode by pressing button on the unit, or the INPUT button on the remote control.
2. Connect the USB device to the USB terminal on the front panel of the unit.
3. The unit will now play songs which are saved on the USB device.

Notes:

• MP3 format is supported.
• Unsupported file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played
• Even when the files are in a supported format (MP3), some may not play or display depending on the compatibility.
• In some case, reading may be as long as 60 seconds, this is not a malfunction.
• Depending on the amount of data and media speed, it may take longer for the unit to read the USB device.
• The maximum USB memory size is 32GB.
• USB memory device must be formatted in FAT, FAT16 or FAT32

Troubleshooting

Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised dealer or service centre.

Problem Description|

Cause

|

Solution

---|---|---
The unit is not powered on|

• Power cable not connected to wall socket
• Power socket is not switched on

|

• Make sure the plug is connected
• Switch the power on

No Sound from AUX/Bluetooth input|

• Volume is too low
• LINE IN/Bluetooth source volume is too low

|

• Increase the volume
• Increase the output volume of the LINE IN source

Sound is distorted from LINE IN Input| • Volume is too high

• LINE IN source volume is too high

|

• Reduce the volume

Reduce the output volume of the LINE IN source

Unable to play CD|

• No disc in the tray
• Disc not loaded properly
• Disc is dirty

|

• Insert a compatible disc
• Check the disc loaded correctly
• Clean the disc

Static Sound| Poor reception| Re-locate the antenna (FM)
Desired station not found|

• Weak signal
• Station not available in your area

|
Unit switches off after 15 minutes of inactivity| Auto standby mode in operation| This unit is designed to enter STANDBY mode automatically after 15 minutes of inactivity. Press the STANDBY button to wake up the unit.

Specifications

General
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

Bluetooth

CD player

Remote control

SHARP CORPORATION
Printed in China

References

• mp3

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>