CRESTRON HD-RXU-4KZ-202 DM Lite 4K60 4:4:4 Receiver and 2×2 Auto-Switcher Owner’s Manual

: June 12, 2024
: CRESTRON

Table of Contents

Introduction
Interoperability with a DM Lite HD-TXU-4KZ Series Transmitter
4K60 4:4:4 and HDR Support
Integrated Web Server
Automatic Switching of Inputs
USB 2.0 Data Extension
Compact, Surface-Mountable Design
Specifications
Compliance
Model
Included Accessory
Available Accessories
Dimension
Customers Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CRESTRON HD-RXU-4KZ-202 DM Lite 4K60 444 Receiver and 2×2 Auto-Switcher

CRESTRON HD-RXU-4KZ-202 DM Lite 4K60 4:4:4 Receiver and 2x2 Auto-
Switcher

Introduction

DM Lite® receiver functionality designed to interoperate with a DM Lite HD-TXU-4KZ Series transmitter
Point-to-point extension of an HDMI® AV signal and USB 2.0 data signals over a CAT5e or higher cable
Two inputs with automatic switching:
- One HDMI input with associated USB 2.0 USB-C® input
- One DM Lite input
DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
4K60 4:4:4 capability
HDR10, HDR10+, and Dolby Vision® video formats
Enterprise-grade security
Compliance with HDCP 2.3
Integrated web server for device configuration and management
Automatic display control using CEC (Consumer Electronics Control)
EDID management
Interoperability with a Crestron 3-Series® or later control system
XiO Cloud® service support
AV Framework™ technology support
Compact, surface-mountable design
Power from 24VDC power pack (included) or from remote DM Lite transmitter (surface mountable only)

The HD-RXU-4KZ-202 is a DM Lite® 4K60 4:4:4 receiver designed to interoperate with a DM Lite HD-TXU-4KZ Series transmitter for the transmission of HDMI® and USB 2.0 signals. A CAT5e or higher twisted pair cable is used to connect the HD-RXU-4KZ-202 to the DM Lite transmitter.
For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1

Interoperability with a DM Lite HD-TXU-4KZ Series Transmitter

For interoperability between the HD-RXU-4KZ-202 and an HD-TXU-4KZ Series transmitter, the DM Lite input port of the HD-RXU-4KZ-202 must be connected to the DM Lite output port of the HD-TXU-4KZ Series transmitter. Examples of supported DM Lite transmitters are the HD-TXU-4KZ-211, HDTXU-4KZ 111-E, and HD-TXU-4KZ-111-2G.

NOTE: If the HD-RXU-4KZ-202 is paired with a DM Lite transmitter other than an HD-TXU-4KZ Series transmitter or paired with a DMPS Lite™ HD-PS Series switcher, USB 2.0 data extension is not supported.

4K60 4:4:4 and HDR Support

The HD-RXU-4KZ-202 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

Integrated Web Server

The HD-RXU-4KZ-202 includes a web server that enables device configuration and management. The web server also enables device, network, and other types of status information to be viewed.

Automatic Switching of Inputs

The web interface of the HD-RXU-4KZ-202 or control system programming can be used to configure the AV switching behavior of the HD-RXU-4KZ-202. Switching between the HDMI and DM Lite inputs can occur based on the last connected input or on the routing priority assigned to each input. In addition, input and output selection push buttons on the front of the HD-RXU-4KZ-202 enable the desired input and output be selected manually.

USB 2.0 Data Extension

Two USB 2.0 host ports are provided on the HD-RXU-4KZ202, enabling connection to USB 2.0 peripheral devices. Various types of USB peripheral devices are supported, including mice, keyboards, whiteboards, touch screens, game controllers, cameras, mobile devices, headsets, printers, flash drives, hard drives, and USB hubs.3

Compact, Surface-Mountable Design

Compact in design, the HD-RXU-4KZ-202 can be mounted onto a flat surface such a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD- RXU4KZ-202 can receive power from the included power pack or from the remote DM Lite transmitter.4

Specifications

Video

Input Signal Types| HDMI® (DVI and Dual-Mode DisplayPort™ interface compatible 5) and DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2
Output Signal Type| HDMI® (DVI compatible5 ) with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2
Copy
Protection| HDCP 2.3
Resolutions| Common resolutions are listed in the following table.
Scan Type| Resolution| Frame Rate| Color Sampling|

Color Depth

---|---|---|---|---

Progressive

|

4096×2160 DCI 4K & 3840×2160 4K UHD

|

24 Hz

| 4:4:4|

12 bit

30 Hz

| 4:4:4| 12 bit
60 Hz| 4:2:2|

12 bit

60 Hz

| 4:4:4| 8 bit
2560×1600 WQXGA| 60 Hz| 4:4:4|

8 bit

1920×1080 FHD 1080p

| 60 Hz| 4:4:4| 12 bit
Interlaced (HDMI input only)| 1920×1080 HD 1080i| 30 Hz| 4:4:4|

12 bit

NOTE: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.

Audio

Input Signal Type| HDMI, DM Lite
Output Signal Type| HDMI
Digital Formats| Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
Connectors

SERVICE| (1) USB 2.0 Type-A connector, female; Used for firmware loading and configuration management; Can also provide up to 5V 500 mA power to a USB powered device
24V 1.9A| (1) 2.1 x 5.5 mm DC power connector; 24VDC power input; PW-2420RU power pack included4
HDMI OUTPUT 1-2| (2) HDMI Type A connectors, female; HDMI digital video/audio output; DVI compatible5
HDMI INPUT 1| (1) HDMI Type A connector, female; HDMI digital video/audio input; DVI and Dual-Mode DisplayPort interface compatible5
DEVICE INPUT 1| (1) USB Type-C® connector, female; USB 2.0 device port associated with HDMI input for AV sources that require USB 2.0 support; USB signal extender port for connection to a computer or other USB 2.0 host3
HOST| (2) USB Type-A connectors, female; USB 2.0 host ports; USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices;3 Available Power: 500 mA @ 5VDC per port
DM LITE IN 2| (1) 8-pin RJ-45 yellow connector, female, shielded; DM Lite input port for connection to the DM Lite output port of a DM Lite HD-TXU-4KZ Series transmitter1, 6
LAN| (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port for device configuration and management
Ground| (1) Chassis ground lug
Controls and Indicators

PWR| (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
AUTO| (1) Push button for enabling or disabling automatic switching of inputs; (1) LED, green indicates that automatic switching of inputs is enabled
SETUP| (1) Push button for Ethernet setup; (1) LED, red indicates that the SETUP push button is pressed
INPUT 1| (1) Push button for manual selection of HDMI input; (1) LED, green indicates that the HDMI input is routed to an output, and amber indicates that a source is detected but is not routed to an output
INPUT 2| (1) Push button for manual selection of DM Lite input; (1) LED, green indicates that the DM Lite input is routed to an output, and amber indicates that a source is detected but is not routed to an output
OUTPUT 1| (1) Push button for manual selection of HDMI output 1; (1) Green LED, indicates that a display or other destination device is detected and HDMI output 1 is transmitting video. Amber indicates that a display or other destination device is detected but no video is routed to the output.
OUTPUT 2| (1) Push button for manual selection of HDMI output 2; (1) Green LED, indicates that a display or other destination device is detected and HDMI output 2 is transmitting video. Amber indicates that a display or other destination device is detected but no video is routed to the output.
DM LITE IN 2| (2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video, and solid amber indicates HDCP video.
LAN| (2) LEDs on RJ-45 connector. Green indicates that a 100 Mbps link is established. Solid amber indicates that a 1000 Mbps link is established. Flashing amber indicates 1000 Mbps Ethernet activity.
Power

Power Pack (Included)| Input: 100-240VAC Output: 24VDC 2.5A Model: PW-2420RU4
Environmental
Temperature| 32° to 104°F (0° to 40°C)
Humidity| 20% to 90% RH (non-condensing)
Enclosure
Chassis| Metal, black finish, vented top and sides, 2 mounting brackets included
Mounting| Freestanding, surface mountable, or attachment to a single rack rail
Dimensions
Height| 1.20 in. (30 mm)
Width| 8.52 in. (216 mm)
Depth| 6.48 in. (165 mm)
Weight
1.95 lb (0.88 kg)

Compliance

Regulatory Model: M202047008
Intertek® Listed for US and Canada, CE, IC,
FCC Part 15 Class B digital device
To search for product certificates, refer to support.crestron.com/app/certificates.

Model

HD-RXU-4KZ-202
DM Lite® 4K60 4:4:4 Receiver and 2×2 Auto-Switcher for
HDMI® and USB 2.0 Signal Extension over CATx Cable

Included Accessory

PW-2420RU
Desktop Power Pack, 24VDC, 2.5A, 2.1 mm

Available Accessories

For a list of available accessories, visit the HD-RXU- 4KZ-202 product page.

For DM Lite connections, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. For information about the maximum transmission distance for each cable type, refer to Online Help Answer ID 1001567.
To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.
4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
The HD-RXU-4KZ-202 is engineered to deliver maximum compatibility with the widest possible range of USB devices. Crestron does not guarantee that all USB devices are compatible with the HD-RXU-4KZ-202.
When a surface-mountable DM Lite receiver is paired with a surface-mountable DM Lite transmitter, either the power pack included with the receiver or the transmitter can be used to power both devices.
A power pack must not be connected to both devices simultaneously. When a surface-mountable DM Lite receiver is paired with a wall plate DM Lite transmitter, the power pack included with the receiver must be used to power both devices.
The HDMI input requires an appropriate adapter or interface cable to accommodate a Dual-Mode DisplayPort or DVI signal. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are sold separately.
Examples of supported DM Lite transmitters are the HD-TXU-4KZ-211,HD-TXU-4KZ-111-E, and HD-TXU-4KZ-111-2G.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To- Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our- locations for your local contact.
The original language version of this document is U.S. English.
All other languages are a translation of the original document.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed online at patents.crestron.com.
Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, 3-Series, .AV Framework, DM Lite, DMPS Lite, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.

DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Intertek is either a trademark or registered trademark of Intertek Group in the United States and/or other countries. USB Type-C and USB-C are either trademarks or registered trademarks of USB Implementers Forum, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.

Specifications are subject to change without notice.
©2023 Crestron Electronics, Inc.
Rev 06/08/23