SFERA LABS IPMB20R48 Iono Pi Industrial Raspberry Pi IO Module User Guide
- June 4, 2024
- SFERA LABS
Table of Contents
IPMB20R48 Iono Pi Industrial Raspberry Pi IO Module
User Guide
IPMB20R48 Iono Pi Industrial Raspberry Pi IO Module
Iono Pi IPMB20R IPMB20RP IPMB20R41 IPMB20R42 IPMB20R44 IPMB20R48
Iono Pi Max ICMX10XS ICMX10XPL ICMX10XP1 ICMX10XP2 ICMX10XP3
Iono RP IRMB10X IRMB10R IRMB10S
Iono RP D16 IRMD10X IRMD10R IRMD10S
Be sure to always remove the power supply before inserting or removing the
Raspberry Pi from the Iono.
In order to meet the relevant CE requirements, Iono must be operated fully
enclosed in a DIN-rail cabinet.
Follow all applicable electrical safety standards, guidelines,
specifications, and regulations for installation, wiring, and operations of
Iono.
Carefully and fully read the Iono user guide before installation:
https://www.sferalabs.cc/iono/
Iono is not authorized for use in safety-critical applications where a failure
of the product would reasonably be expected to cause personal injury or death.
Safety-critical applications include, without limitation, life support devices
and systems, equipment or systems for the operation of nuclear facilities, and
weapons systems. Iono is neither designed nor intended for use in critical
military or aerospace applications or environments and for automotive
applications or environments. Customer acknowledges and agrees that any such
use of Iono is solely at Customer’s risk and that Customer is solely
responsible for compliance with all legal and regulatory requirements in
connection with such use. Sfera Labs S.r.l. may make changes to specifications
and product descriptions at any time, without notice. The product information
on the website or materials is subject to change without notice.
Iono and Sfera Labs are trademarks of Sfera Labs S.r.l. Other brands and names
may be claimed as the property of others.
Copyright © 2022 Sfera Labs S.r.l. All rights reserved.
Safety information
Carefully and fully read the user guide before installation and retain it for
future reference.
Qualified personnel
The product described in this manual must be operated only by personnel
qualified for the specific task and installation environment, in accordance with
all relevant documentation and safety instructions. A qualified person should
be capable of fully identifying all installation and operation risks and
avoiding potential hazards when working with this product.
Hazard levels
This manual contains information you must observe to ensure your personal
safety and prevent damage to property. Safety information in this manual is
highlighted by the safety symbols below, graded according to the degree of
danger.
DANGER
Indicates a hazardous situation that, if not avoided, will result in death or
serious personal injury.
WARNING
Indicates a hazardous situation that, if not avoided, may result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation that, if not avoided, can result in minor
or moderate personal injury.
NOTICE
Indicates a situation that, if not avoided, can result in damage to property.
Safety instructions
General safety instructions
Protect the unit against moisture, dirt, and any kind of damage during
transport, storage, and operation. Do not operate the unit outside the
specified technical data.
Never open the housing. If not otherwise specified, install in a closed housing
(e.g. distribution cabinet). Earth the unit at the terminals provided, if
existing, for this purpose.
Do not obstruct the cooling of the unit. Keep out of the reach of children.
WARNING
Life-threatening voltages are present within and around an open control
cabinet.
When installing this product in a control cabinet or any other areas where
dangerous voltages are present, always switch off the power supply to the
cabinet or equipment.
WARNING
Risk of fire if not installed and operated properly.
Follow all applicable electrical safety standards, guidelines, specifications,
and regulations for installation, wiring, and operations of this product.
The internal components could generate a substantial amount of heat. Ensure
that the product is properly installed and ventilated to prevent overheating.
When present, an internal fan significantly improves the airflow and heat
dissipation.
Depending on external environmental conditions, the fan could collect a
significant amount of dust or other impurities, that could prevent it from
spinning or could reduce its effectiveness. Periodically check that the fan is
not blocked or partially obstructed.
NOTICE
The connection of expansion devices to this product may damage the product and
other connected systems and may violate safety rules and regulations regarding
radio interference and electromagnetic compatibility.
Use only appropriate tools when installing this product. Using excessive force
with tools may damage the product, alter its characteristics or degrade its
safety.
Battery
This product may include a small lithium non-rechargeable battery to power its
internal real-time clock (RTC). Some models also optionally use an external
rechargeable lead-acid battery for the uninterruptible power supply.
WARNING
Improper handling of lithium batteries can result in an explosion of the
batteries and/or the release of harmful substances.
Worn-out or defective batteries can compromise the function of this product.
Replace the RTC lithium battery before it is completely discharged. The
lithium battery must be replaced only with an identical battery. See the
“Replacing the RTC backup battery” section for instructions.
Do not throw lithium batteries into fire, do not solder on the cell body, do
not recharge, do not open, do not short-circuit, do not reverse polarity, do
not heat above 100°C, and protect from direct sunlight, moisture, and
condensation.
Only use a lead-acid battery with electrical ratings recommended in the
technical specifications for this product.
Follow the battery manufacturer’s instructions when installing the external
UPS battery (not provided).
Dispose of used batteries according to local regulations and the battery
manufacturer’s instructions.
Warranty
Sfera Labs S.r.l. warrants that its products will conform to the
specifications. This limited warranty lasts for one (1) year from the date of
the sale. Sfera Labs S.r.l. shall not be liable for any defects that are
caused by neglect, misuse, or mistreatment by Customer, including improper
installation or testing, or for any products that have been altered or modified
in any way by Customer. Moreover, Sfera Labs S.r.l. shall not be liable for
any defects that result from Customer’s design, specifications, or instructions
for such products. Testing and other quality control techniques are used to
the extent that Sfera Labs S.r.l. deems necessary.
Warranty will not apply in the event of:
- installation, maintenance, and use contrary to the instructions and warnings provided by Sfera Labs S.r.l. or in conflict with legal regulations or technical specifications;
- damages occurred due to: defects and/or abnormalities of the electrical wirings, defects or abnormal distribution, failure or fluctuation of electrical power, abnormal environmental conditions (such as dust or smoke, including cigarette smoke), and damages related to air conditioning systems or humidity control systems;
- tampering;
- damage due to natural events or force majeure or not related to the original defects, such as damage due to fire, flood, war, vandalism, and similar events;
- damage caused by the use of the product outside of the limitations set in the technical specifications;
- removal, modification of the serial number of the products, or any other action which prevents its unique identification;
- damage caused during transportation and shipment.
The complete Terms and Conditions document applies to this product is available here: https://www.sferalabs.cc/terms-and-conditions/
Disposal
Waste Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate
collection systems). This marking on the product, accessories, or literature
indicates that the product should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, separate these
items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take these items for environmentally safe recycling. This product and its
electronic accessories should not be mixed with other commercial wastes for
disposal.
Iono may include a small non-rechargeable manganese dioxide lithium coin
battery. This battery is not accessible from the outside. You should first
remove the case body to gain access to the Iono circuit boards. Always remove
the battery before disposing of this product.
Installation and use restrictions
Standards and regulations
The design and the setting up of electrical systems must be performed
according to the relevant standards, guidelines, specifications, and
regulations of the relevant country. The
installation, configuration, and programming of the devices must be carried out
by trained personnel.
The installation and wiring of connected devices must be performed according
to the recommendations of the manufacturers (reported on the specific data
sheet of the product) and according to the applicable standards.
All the relevant safety regulations, e.g. accident prevention regulations, and
laws on technical work equipment, must also be observed.
Safety instructions
Carefully read the safety information section at the beginning of this
document.
Set-up
For the first installation of the device proceed according to the following
procedure:
✓ make sure all power supplies are disconnected
✓ install and wire the device according to the schematic diagrams on the
specific product user guide
✓ after completing the previous steps, switch on the power supply and other
related circuits.
Conformity Information
EU
The declaration of conformity is available on the internet at the following
address: https://www.sferalabs.cc/iono/
USA
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
CANADA
This Class B digital apparatus complies with Canadian ICES-003.
RCM AUSTRALIA / NEW ZEALAND
This product meets the requirements of the standard EN 61000-6-3 – Emission
for residential, commercial, and light-industrial environments. See the
product’s User Guide for additional information.
Compliance information for Raspberry Pi Model B
IPMB20R contains a standard Raspberry Pi 3 Model B single-board computer.
IPMB20RP contains a standard Raspberry Pi 3 Model B+ single board computer.
IPMB20R41, IPMB20R42, IPMB20R44, and IPMB20R48 contain a standard Raspberry Pi
4 Model B single-board computer. These boards have WiFi and Bluetooth radios.
They are user accessible and replaceable.
EU
Raspberry Pi 3 Model B, Raspberry Pi 3 Model B+, and Raspberry Pi 4 Model B
are in conformity with the essential requirements and other relevant
requirements of the Radio Equipment Directive 2014/53/EU.
USA
Raspberry Pi 3 Model B FCC IDENTIFIER: 2ABCB-RPI32
Raspberry Pi 3 Model B+ FCC IDENTIFIER: 2ABCB-RPI3BP
Raspberry Pi 4 Model B FCC IDENTIFIER: 2ABCB-RPI4B
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product guidelines. This (WiFi
DTS) device has a 20 MHz bandwidth mode.
CANADA
Raspberry Pi 3 Model B IC CERTIFICATION No.: 20953-RPI32
Raspberry Pi 3 Model B+ IC CERTIFICATION No.: 20953-RPI3BP
Raspberry Pi 4 Model B IC CERTIFICATION No.: 20953-RPI4B
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
August 2022,
Revision 031
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>