BRAUN VloggKit 140 Ring Light User Guide
- June 13, 2024
- Braun
Table of Contents
BRAUN VloggKit 140 Ring Light
OVERVIEW
INSTALLATION
- Unscrew the adjusting knob at the bottom of the Tripod
- Pull the legs straight down and into position
- Adjust the tripod to the appropriate height and tighten the fixture
- Install Ball hand
- Connect the ring light and the ball hand together
- Install the phone holder
Instructions
- After the installation, connect the AC adaptor to the power supply and press the to light up.
- can adjust the color temperature. (White, Warm Yellow, Warm Yellow + White.)
- can adjust the brightness of the ring light. There are 10 color levels, you can adjust the light to a comfortable level as you need
- After use, press the to turn off the power.
Attention:
- When selecting an adapter, it is recommended to use 12V.4A
- Please unplug the power after use.
- Keep away from the fire.
Specifications
- Power: 35W
- Dimmerable: Yes
- LED bulbs: 336 pcs
- Color Temp: 3200-5600k
BRAUN PHOTO TECHNIK GMBH, MERKURSTRASSE 8, 72184 EUTINGEN / GERMANY, post @braun-phototechnik.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>